Hydrogen production for fuel cell application in an autothermal micro-channel reactor
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
A novel design of microstructured membrane reactor with micro-channels formed between closely packed catalytic filaments is reported. The system comprises filaments of 7 mm in diam. and has a laminar flow with a short radial diffusion time. This leads to l ...
Dense planar and tubular oxygen separation membranes of La 0.6Ca0.4Fe0.75Co0.25O3-d were investigated as reactors for the partial oxidation (POX) of methane to syngas. Disk-shaped membranes were prepared by compaction and tubes by extrusion. Their permeati ...
The aim of this work was to operate the steam reforming of methanol and the total oxidation of methanol in a microstructured two-passage reactor. The steam reforming enables the production of hydrogen at relatively low temperatures (250 °C) with only a sma ...
The dissociation of methane on a nickel catalyst is a key step in steam reforming of natural gas for hydrogen production. Despite substantial effort in both experiment and theory, there is still no atomic-scale description of this important gas-surface rea ...
The content of this report is property of HTceramix and subject to restrictive distribution The goal of the project "Oxygen membranes for the partial oxidation of natural gas" was the pre-industrial evaluation of the concept of an electroceramic reactor, c ...
A method that combines process modelling and process integration techniques has been developed to tackle the design of complex integrated systems like fuel cell systems. This method uses the equations of the composite curves as constraints to model the ide ...
The photocatalyst for the use in the production of hydrogen from water or aqueous solutions of organic compounds by using light energy, comprises carbon, in addition to a semiconducting photocatalytic material. The photocatalytic apparatus for the producti ...
(The Hydrogen Solar Production Company Limited, UK).2002
A model of a system including a proton exchange membrane (PEM) fuel cell and its fuel processing section has been developed. The goal was to investigate the process configurations to identify the optimal operating conditions and the optimal process structu ...
A model for a 1000 kW class solid oxide fuel cell (SOFC) system running on biogas from a sewage sludge digestion plant was implemented in a process flow scheme using external steam reforming. The model stack consisted of planar anode supported cells operat ...
The use of ammonia as a source of hydrogen for fuel cells has received little attention until now. Ammonia offers several advantages over hydrogen as a fuel and is produced commercially in massive quantities and as a biogas. This paper describes the result ...
