A micromechanical approach to the behaviour of single wood fibers and wood fracture at cellular level
Related publications (109)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
We present prototype modules for a tracking detector consisting of multiple layers of 0.25 mm diameter scintillating fibers that are read out by linear arrays of silicon photomultipliers. The module production process is described and measurements of the k ...
The Influence of SiO2 nanoparticles and rubber micro-fillers on the mechanical and thermal responses of an epoxy based composite is investigated using classical quantitative thermo-mechanical testing (tensile tests DMTA TMA) microstructural analysis (Micro ...
We present a prototype for the first tracking detector consisting of 250 mu m thin scintillating fibers and silicon photomultiplier (SiPM) arrays. The detector has a modular design, each module consists of a mechanical support structure of 10 mm Rohacell f ...
Tensile tests have been performed on replicated aluminum alloy foams of relative density between 4.5% and 8%. During the test the electrical resistance was measured with a four-point set-up and the displacements along the gage section were measured using a ...
The resistance as well as strain hardening and softening properties of UHPFRC depend on the type of matrix and mainly on the fibre dosage and final distribution and orientation in the element. The strength and deformability distribution in a thin UHPFRC pa ...
Japan Concrete Institute (JCI) Japan Society of Civil engineers (JSCE) Canadian society for Civil engineering (CSCE) ConMat'092009
This study investigates the influence of strain state distribution on the accuracy of embedded optical fiber Bragg gratings (FBGs) used as strain sensors. An optical fiber embedded parallel to adjacent structural fibers in a graphite epoxy quasi-isotropic ...
In this paper we investigate the effect of microstructure irregularities and applied strain on backward Brillouin scattering by comparing two photonic crystal fibers drawn with different parameters in order to minimize diameter and microstructure fluctuati ...
The resistance as well as strain hardening and softening properties of UHPFRC depend on the type of matrix and mainly on the initial fibre dosage and final fibre distribution and orientation in the cast element. According to the final fibre distribution an ...
This study addresses unreported features for Cu DC-magnetron sputtering on cotton mediating inactivation of Escherichia coil K12 (from now on E. coil). In-depth profile for the different Cu-species inside the cotton fibers was determined by 5 key Ar+ etchi ...
The effect of wood fiber anisotropy and their geometrical features on wood fiber composite stiffness is analyzed. An analytical model for an N-phase composite with orthotropic properties of constituents is developed and used. This model is a straightforwar ...