Comparative study and selection criteria of linear motors

Initially, linear motors have been particularly dedicated to transportation systems. Nowadays, linear motors are meant to replace a system using a rotating motor and a transmission to realize a linear movement. With linear motors the performances increase considerably since the mechanical limitations are removed. This leads to a better precision, a higher acceleration and a higher speed of the moving part. Therefore, direct drives with linear motors are increasingly used in industrial applications although these solutions need often more investment costs. Different linear motor structures and technologies exist. They can be either induction or synchronous motors with a transverse or a longitudinal flux. Furthermore, linear motors may have several topologies. They can be either long or short stator and double or single sided. All these variants may be combined giving therefore numerous possibilities to perform a linear movement. Hence, to make the best choice for a given application, a global methodology based on the comparison of optimized motors is presented in the thesis. This design methodology is based on figure of merits which are bound to the specifications of the studied application. This method differs from a conventional one since optimized motors with the same objective function are compared. The optimized motors are obtained by an indirect method based on an optimization algorithm (Sequential Quadratic Programming, SQP). An indirect approach differs from the conventional deterministic one for which at least one parameter must be fixed to obtain a motor pre design, since there are constraints and validity domain which are introduced. The proposed methodology can be applied either to rotating or to linear motor design. The use of an optimization program to perform motor designs requires analytical motor models. The models developed in this thesis take into account the thermal behavior of the motors in order to achieve more realistic results. Furthermore, the analytical models of synchronous motors are thoroughly studied leading to several interesting conclusions. They are based on well known algorithms developed for rotating motors. The proposed models are very accurate in comparison with the FEM program, except for a transversal flux linear motor for which the obtained results are not worthwhile enough to be optimized. This is caused by the structure of the motor which is close to a reluctant motor and imposes to model the motor by a lumped magnetic scheme. Moreover, a global analysis of the windings due to the particularity of linear motor to have an even or odd number of poles is presented in the thesis. The methodology proposed in the thesis is successfully used for an innovative application which deals with a multi mobile system for a lift. For this lift, several cabins travel in the same shaft implying linear motors to move autonomously each cabin. First, by comparing the different motor technologies, the best motor type is selecte