Strain dependence of transport critical exponent in RuO2-glass systems
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Existing phenomenological constitutive models are unable to capture the full range of behaviors of ceramic composite laminates. To ameliorate this deficiency, we propose a new model based on the deformation theory of plasticity. The predictive capabilities ...
Structural components used in civil engineering applications are often subjected to compressive loads. Unlike the tensile strength of fiber-reinforced polymer (FRP) materials, their compressive strength is resin-dominated, exhibiting lower values and more ...
Continuous-fiber ceramic matrix composites (CMCs) are of interest as hot-section components in gas turbine engines due to their refractoriness and low density relative to metallic alloys. In service, CMCs will be subjected to spatially inhomogeneous temper ...
This contribution draws practical implications of a recently published estimation of the tensile ductility in laminated composites made of two ductile materials, typically metals or alloys, which harden as both the strain and the strain-rate increase. To t ...
The effect of temperature on the crack onset strain (COS) of brittle coatings on polymer substrates was investigated through a series of temperature-controlled tensile tests carried out in situ under an optical microscope. It was observed that the failure ...
The overall aim of this thesis has been to assess the potential of latex-based technologies for the preparation of polymer/clay nanocomposites. The key feature of latex-based technologies is that they offer the possibility of improved control of the final ...
Hot tearing is one of the most severe defects observed in castings, e.g. in billets or sheet ingots of aluminum alloys produced by DC casting. It is due to both tensile strains and a lack of interdendritic feeding in the mushy zone. In order to predict thi ...
In this thesis we address the description of electrical transport properties of disordered conductor-insulator composites, mostly by numerical Monte Carlo simulations and analytical study of realistic tunnelling-percolation models. Such composites are basi ...
The tunneling-percolation mechanism of conduction in disordered conductor-insulator composites is studied for a realistic continuum model where conducting and impenetrable spherical particles are dispersed in a three-dimensional continuum insulating materi ...
Different factors such as age, location of timber within the tree, structural imperfections, load history such as wind and snow etc. can affect the material properties of timber taken from the same species, and grown in the same geographical location and l ...
