Publication

Pb(Mg1/3Nb2/3)O-3 and (1-x)Pb(Mg1/3Nb2/3)O-3-xPbTiO(3) relaxor ferroelectric thick films: Processing and electrical characterization

Related publications (90)

Pyroelectricity in poled all-organic polar polynorbornene/polydimethylsiloxane-based stretchable electrets

Pyroelectricity in a recently developed all-organic composite electret with a polar polynorbornene-based filler and polydimethylsiloxane (PDMS) matrix has been studied with the help of thermal and dielectric techniques. Measurement of the pyroelectric p co ...

Royal Soc Chemistry2024

Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper substrates

Danick Briand, Luis Guillermo Villanueva Torrijo, Morgan Mc Kay Monroe

The development of fully solution-processed, biodegradable piezoelectrics is a critical step in the development of green electronics towards the worldwide reduction of harmful electronic waste. However, recent printing processes for piezoelectrics are hind ...

2023

Ultrahigh Electrostrictive Effect in Lead-Free Ferroelectric Ceramics Via Texture Engineering

Dragan Damjanovic, Li Jin, Yuan Sun

The electrostrictive effect, which induces strain in ferroelectric ceramics, offers distinct advantages over its piezoelectric counterpart for high-precision actuator applications, including anhysteretic behavior even at high frequencies, rapid reaction ti ...

Washington2023

Nonlinear electro-mechanical coupling and thermally stimulated currents in relaxor ferroelectrics

Lukas Riemer

In this work, the emergence of polarization and electro-mechanical coupling in Pb(Mg1/3Nb2/3)O3 and Pb(Mg1/3Nb2/3)O3 â PbTiO3 was investigated by means of thermally stimulated current, and nonlinear dielectric and electro-mechanical measurements. The pre ...

EPFL2022

Freeform Microstructuring of Cast Polymer-Derived Ceramics by Sacrificial Direct Laser Writing

Jürgen Brugger, Lorenz Hagelüken

Polymer-derived ceramics are known for their resistance to high temperatures and harsh environments as well as property tunability and compatibility with various shaping techniques. We demonstrate here a new hierarchical micro-manufacturing process combini ...

2021

Interface-Dominated Time-Dependent Behavior of Poled Poly(Vinylidene Fluoride–Trifluoroethylene)/Barium Titanate Composites

Véronique Michaud, Yves Leterrier, Dragan Damjanovic, Sara Dalle Vacche

Composites in which particles of ferroelectric ceramic phase are randomly dispersed in a polymeric matrix are of interest because of flexibility, conformability, and ease of processing. However, their piezoelectric properties are rather low, unless very hi ...

2020

Dielectric Actuation Techniques at the Nanoscale: Piezoelectricity and Flexoelectricity

Kaitlin Marie Howell

Micro- and nanoelectromechanical systems (MEMS/NEMS) have long shown their potential to disrupt the established technologies. Over the past 15 years, MEMS have become fundamental components in filters, accelerometers, gyroscopes and gas sensors. MEMS are n ...

EPFL2019

Al0.83Sc0.17N Contour-Mode Resonators With Electromechanical Coupling in Excess of 4.5%

Paul Muralt, Luis Guillermo Villanueva Torrijo, Andrea Lozzi

In this paper, we demonstrate the fabrication of contour-mode resonators (CMRs) with Al0.83Sc0.17N as a piezoelectric layer. Moreover, we assess the electromechanical coupling and the maximum achieved quality factor from 150 to 500 MHz. In comparison to pu ...

2019

Artificial Muscles: Dielectric Elastomers Responsive to Low Voltages

Yauhen Sheima

The lack of soft high-dielectric-permittivity elastomers responsive to a low voltage has been a long-standing obstacle for the industrialization of dielectric elastomer actuators (DEA) technology. Here, elastomers that not only possess a high dielectric pe ...

WILEY-V C H VERLAG GMBH2019

Improved mechanical dispersion or use of coupling agents? Advantages and disadvantages for the properties of fluoropolymer/ceramic composites

Véronique Michaud, Yves Leterrier, Dragan Damjanovic, Sara Dalle Vacche

The aim of this work is to investigate the influence of interfacial chemistry on the properties of fluoropolymer composites, independent of effects derived from changes in morphology, in particular particle dispersion state. A comparative study of solvent ...

2018

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.