Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The measurement of the tokamak plasma ion temperature can be obtained by collective Thomson scattering. This method requires a far infrared laser to achieve useful spatial resolution for typical tokamak plasma parameters. The very low Thomson scattering cr ...
Laser induced photolytic and pyrolytic deposition spots on silicon are studied for different laser powers, partial pressure and deposition time. In the photolytic case at low powers, the reaction takes place in the adsorbed phase on the surface, whereas at ...
Laser generated defects in (Al,Ga) As have been investigated by photochemical wet etching and TEM measurements. Photoetching reveals a 500 nm wide zone in the center of the processed area where according to laser power either a luminescent or a nonradiativ ...
Springer-Verlag (Springer Series in Chemical Physics 39)1984
The deposition of Ga on quartz substrates by photodissociation of trimethylgallium has been investigated. Light from a frequency doubled Ar-ion laser beam (257.2 nm) was focused onto quartz substrates. The Ar-ion laser was operated under CW or mode-locking ...
N-type GaAs substrates have been exposed to zinc atmospheres at 600-800 deg.C and focused light from a Kr-ion laser at 647.1 nm. Etch pits are generated at optical densities of 0.2-10 KW/cm2 and exposure times of 5-60 minutes. They are characterised by a s ...
An interferometric technique was developed for detecting fast displacements of small areas in beam direction by less than λ/8. It utilizes a modified Michelson interferometer and a He-Ne laser light source. The technique was applied to measure the t ...
Microscopic ohmic contacts are made by laser chem. vapor deposition of platinum on a Pyrex substrate. The elec. cond. of the deposited metal stripes is measured as a function of the laser power, the writing speed, and the organometallic vapor pressure. The ...
SF6 in a free jet was vibrationally excited by a continuous-wave CO2 laser. The subsequent energy transfer processes, in which vibrational energy is degraded, lead to changes in the beam's spatial, velocity and cluster-size distributions. These changes wer ...
A mol. beam mass spectrometer was constructed to study the formation of van der Waals clusters over a wide mass range. Using this app. (SF6)m was detected with 1 ? m ? 100 in the adiabatic expansion of SF6. By irradiating the SF6 jet with a continuous-wave ...
The laser-induced pyrolytic deposition of Pt spots on glass was studied for different laser powers, beam diams., and irradn. time. Laser powers up to 500 mW give deposition rates of typically 0.5 mm/s. Temp. calcns. as a function of time allows one to stud ...
