Publication
Functionally graded metals and metal-ceramic composites .1. Processing
Related publications (42)
Deformation behavior of sintered nanocrystalline silver layers
Helena Van Swygenhoven, Steven Van Petegem
The microstructure of porous silver layers produced under different low temperature pressure-assisted sintering conditions is characterized and linked with the mechanical behavior studied insitu during X-ray diffraction. Peak profile analysis reveals impor ...
Pergamon-Elsevier Science Ltd2015Microstructural characterizations of 14Cr ODS ferritic steels subjected to hot torsion
Oxide dispersion strengthened (ODS) steels are very promising materials for nuclear applications. In thispaper, the hot working behavior of ODS ferritic steels, consolidated by hot extrusion, is studied through torsion tests. Three ODS steels are produced ...
Elsevier2015Correlation between ferrite grain size, microstructure and tensile properties of 0.17wt% carbon steel with traces of microalloying elements
Five different grain sizes are produced in 0.17 wt% carbon steel using varying rates of cooling from austenitization temperatures. Controlled furnace cooling from 1100 °C and 950 °C produces coarse ferrite grains of 40 µm and 32 µm diameter, respectively, ...
Elsevier2014Exploratory 2D and 3D numerical investigation of SG-laminated reinforced glass beams
SentryGlas®(SG)-laminated reinforced glass beams are numerically investigated. This innovative structural typology consists of a composite section in which the typical brittle behaviour of glass is overcome by means of stainless steel sections able to prov ...
2014Thermal Boundary Conductance between metals and dielectrics
This work consists in an experimental study of the main parameters governing the transport of heat across an interface between two solids, when it is dominated by phonons. The main experimental tool used is Time-Domain ThermoReflectance (TDTR), which is an ...
EPFL2013High temperature transformations in a steel-TiCN cermet
The influence of the carbon content on the microstructure, phase transformation and hardness of an iron-based cermet is studied. The cermet is constituted by a high-alloyed steel as matrix, and TiCN particles (50 vol.%) as reinforcement. The material is pr ...
Elsevier Sci Ltd2013The effect of processing conditions on the microstructure and impact behavior of melt infiltrated Al/SiCp composites
In the current research, pressureless melt infiltration (PM!) was applied to study the effect of different processing conditions on the final properties of Al/SiC composites, fabricated through the infiltration of aluminum melt into SiC particulates porous ...
Elsevier2011