Tensile behaviour of discontinuous two-phase materials
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Poly(lactide-co-glycolide) (PLGA) scaffolds have been successfully used in bone tissue engineering, with or without hydroxyapatite (HA) and with a macroporosity given either by simple PLGA sphere packaging and/or by leaching out NaCI. The objective of this ...
Fibre-reinforced composites are being increasingly used as alternatives for conventional materials primarily because of their high strength, specific stiffness, light weight and adjustable properties. However, before using this type of material with confid ...
The thermal conductivity of aluminum matrix composites having a high volume fraction of SiC particles is investigated by comparing data for composites fabricated by infiltrating liquid aluminum into preforms made either from a single particle size, or by m ...
We present dynamic measurement of drainage curves in two systems having relevance to metal matrix composite processing, namely SiC/Al and SiC/Al-12.2at%Si. Data show that liquid/solid chemical reactions that cause a lowering of the contact angle do indeed ...
Hot tearing is one of the most severe defects observed in castings, e.g. in billets or sheet ingots of aluminum alloys produced by DC casting. It is due to both tensile strains and a lack of interdendritic feeding in the mushy zone. In order to predict thi ...
The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...
Fabrication of a millinewton force sensor, which is based on LTCC technology as an alternative to the widely used alumina (Al2O3) is described. The new sensor, integrated with piezoresistor thick-film, has shown an increase in the sensitivity by two times ...
A method of analyzing a sample with a probe based measurement instrument using stiffness tomography. Stiffness or elastic modulus data obtained through contact measurement with the sample as a function of depth is used in the detection of features, particu ...
In this study, the tensile and fracture properties and the microstructure of the reduced-activation tempered martensitic steel Eurofer97 have been investigated. This technical alloy is a 9%Cr steel developed within the European fusion material research pro ...
Tungsten-iron alloy was produced by electrodeposition. The electrodeposited alloy (15 at.% W) possesses a two-phase composite microstructure, containing a nanocrystalline phase of distorted BCC structure with a grain size between 50 to 150 nm and an amorph ...