Substrate heating method for coating metal surfaces with high-silica zeolites: ZSM-5 coatings on stainless steel plates
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Multi-walled carbon nanotubes (MWCNTs) were successfully coated with tin-dioxide (SnO2) nanopartides using both hydrothermal process and sol-gel technique under different solvent conditions. The obtained MWCNTs/SnO2 nanocomposites had the weight ratio of t ...
Time-resolved in situ X-ray tomography combined with scanning electron microscopy was performed on an Al-Fe diffusion system at 973 K (700 A degrees C) to study the formation of the main intermetallic compounds occurring at the interface. After nucleation ...
In bulk composite materials, interfaces between adjacent materials can be neglected when evaluating the individual functional properties on the macroscopic scale. However, in nanostructured materials, what is described as an interfacial region can be a sig ...
This work presents a study of XRD measurements on the development of the (113) preferential orientation with film thickness for Ti0.67Al0.33N films grown on Si(100) substrates by pulsed DC magnetron sputtering. The buildup of (113) texture was observed usi ...
We have prepared multiwalled carbon nanotube (MWCNT)/In2O3 composites using a simple impregnation method. The precursor compound indium(III) chloride (InCl3) was used to cover the surface of MWCNTs and distilled water was used as solvent. The applied mass ...
Massive skeletons of living hypercalcified sponges, representative organisms of basal Metazoa, are uncommon models to improve our knowledge on biomineralization mechanisms and their possible evolution through time. Eight living species belonging to various ...
Exploring the dynamics of Charge density wave system 1T-TaS2 via femtosecond electron diffraction demonstrated the power of this technique for studying ultrafast structural phenomena in strongly correlated electron materials [1]. The results revealed first ...
In recent years quantum antiferromagnets with an intrinsically disordered (“spin liquid”) ground state and an energy gap in the spin excitation spectrum have received a great deal of attention. In search for new experimental realizations of spin-ladder and ...
Fluorine-doped tin oxide (FTO) films were deposited on float glass to create low-emissivity glass (low-E glass) by atmospheric pressure chemical vapor deposition (APCVD). Heat treatments were carried out to assess its antioxidant properties. The surface mo ...
The tribocorrosion of a Stellite 21 type alloy sliding against alumina in sulfuric acid was investigated in order to identify relevant degradation mechanisms. Tribocorrosion tests were performed using a reciprocating motion pin-on-plate system operating un ...