Leading the Blind : Automated Transistor-Level Modeling for FPGA Architects

The design and development of innovative FPGA architectures hinge on the flexibility of its toolchain. Retargetable toolchains, like the Verilog-to-Routing (VTR) flow, have been developed to enable the testing of new FPGAs by mapping circuits onto easily-described and possibly theoretical architectures. However, in reality, the difficulty extends beyond having CAD tools that support the architectural changes: it is equally important for FPGA architects to be able to produce reliable delay and area models for these tools. In addition to having acute architectural intuitions, designing and optimizing the circuit at the transistor-level requires architects to have, as well, a particular set of electrical engineering skills and expertise. The process is also painstaking and time-consuming, rendering the comparison of a variety of architectures or the exploration of a wide design space quite complicated and even impossible in practice. In this work, we present a novel approach to model the delay and area of FPGA architectures with various structures and characteristics, quickly and with acceptable accuracy. Abstracting from the user the transistor-level design and optimization that normally accompany the model- ing process, this approach, called FPRESSO, can be used by any architect without prerequisites. We take inspiration from the way a standard-cell flow performs large-scale transistor-size optimization and apply the same concepts to FPGAs, only at a coarser granularity. Skilled designers prepare for FPRESSO a set of locally optimized libraries of basic parameterizable components with a variety of drive strengths. Then, inexperienced users specify arbitrary FPGA architectures as interconnects of these basic components. The architecture is globally optimized, within minutes, through a standard logic synthesis tool, by choosing the most fitting version of each cell and adding buffers wherever appropriate. The resulting delay and area characteristics are automatically returned, in a format suitable for the VTR flow. A correct modeling of any architecture requires not only an optimization of the logic components, but also a proper modeling of the wires connecting these components. This does not only include measuring the length of the wires to determine their respective resistance and capacitance, but also, minimizing their length to reduce the wireload effect on the overall performance. To that end, FPRESSO features an automatic and generic wire modeling approach based on a simulated annealing floorplanning algorithm, to estimate the wires between the different components of the FPGA architecture. To evaluate the results of FPRESSO and confirm the validity of its modeled architectures, we use it to explore a wide range of FPGA architectures. First, we repeat a known study that helped set the standards on the optimal Look-Up-Table (LUT) and cluster size for conventional FPGAs. We show, by comparing with the results of the study, that modeling in FPRES