Publications related to Silicon microresonator arrays: A comprehensive study on fabrication techniques and pH-controlled stress-induced variations in cantilever stiffness

Acids from fruits generate photoactive Fe-complexes, enhancing solar disinfection of water (SODIS): A systematic study of the novel " fruto-Fenton " process, effective over a wide pH range (4-9)

César Pulgarin, Aline Laetitia Schaub, Stefanos Giannakis, Giulio Farinelli, Mona Kohantorabi

This study aimed to enhance solar disinfection (SODIS) by the photo-Fenton process, operated at natural pH, through the re-utilization of fruit wastes. For this purpose, pure organic acids present in fruits and alimentary wastes were tested and compared wi ...

Pergamon-Elsevier Science Ltd2024

Photo-Fenton inactivation of MS2 bacteriophage at alkaline pH by Fe salts or nm to μm-sized oxides, and the Janus-faced effects of natural organic matter in surface waters

César Pulgarin, Stefanos Giannakis, Giulio Farinelli, Ogadimma Cassandra Oji-Okoro

In this study, MS2 bacteriophage was inactivated by homogeneous and heterogeneous photo-Fenton processes in an alkaline matrix (pH 8) using low concentrations of H2O2 and iron forms (1 mg/L), including Fe(II), Fe(III), and Fe (hydr)oxides. As a reference, ...

Elsevier2024

Additively manufactured stretchable zipping electrostatic actuators

Giulio Grasso

The use of soft and stretchable materials allows the development of adaptive robotic systems and human-machine interfaces that are more natural and comfortable to interact with. One of the application fields that benefits the most from these compliant mate ...

EPFL2024

Bacterial inactivation in sunlit surface waters is dominated by reactive species that emanate from the synergy between light, iron, and natural organic matter

César Pulgarin, Stefanos Giannakis, Jun Ma, Da Wang, Shuang Song

In this study, the synergistic and antagonistic effects of Fe species and coexisting natural organic matter (NOM) on the efficacy of solar light disinfection of water are investigated. Different initial iron species (Fe2+/Fe3+) and naturalorganic matter ty ...

Elsevier2023

Zinc hybrid sintering for printed transient sensors and wireless electronics

Danick Briand, Nicolas Francis Fumeaux

Transient electronics offer a promising solution for reducing electronic waste and for use in implantable bioelectronics, yet their fabrication remains challenging. We report on a scalable method that synergistically combines chemical and photonic mechanis ...

2023

Sunshine and a pinch of tropical soils: A natural, low-cost photo-Fenton variation for safer water, assisted by H2O2 or percabonate

César Pulgarin, Michaël Bensimon, Stefanos Giannakis, Thomas Guillaume, Jérémie Decker

Clean water is essential for human survival, but access to safe drinking water remains a challenge in resource -limited regions. Herein, we explored a low-cost but effective solution for water potabilization using natural iron sources from soils along with ...

ELSEVIER2023

Improving planar optode lifetime: encapsulation and optical release of pH-sensing optodes and assessment of their lifetime in situ

Victoria Alexandrine Julia Suzanne Marthe Fay

PurposePlanar fluorescent optodes are important tools for probing key parameters, such as the soil pH, O2 level, and CO2 level, associated with the biology and biochemistry process in the rhizosphere. In this paper, we address an important limitation of ex ...

SPRINGER HEIDELBERG2023

Effect of alkali, aluminium and equilibration time on calcium-silicate-hydrates

Yu Yan

Calcium silicate hydrate (C-S-H) is the main hydration product in Portland and blended cements, and greatly affects durability and mechanical properties of the hydrated cement. In the presence of Al-rich supplementary cementitious materials (SCMs), C-(A-)S ...

EPFL2022

Al uptake in calcium silicate hydrate and the effect of alkali hydroxide

Karen Scrivener, Barbara Lothenbach, Yan Yan

The effect of Al and of pH on the structure of calcium silicate hydrate (C-S-H), the most important hydration product in Portland and blended cement, was studied at Ca/Si similar to 1.0. The presence of Al led to higher amounts of secondary phases, larger ...

Pergamon-Elsevier Science Ltd2022

A new versatile hybrid MEMS technology for high sensitivity, fluid proof sensing applications

Matthias Neuenschwander

The field of micro electromechanical systems (MEMS) evolved from the microelectronic industry and the technologies developed to fabricate integrated circuits. As a result, MEMS are commonly fabricated on silicon wafers. The development of MEMS has been dri ...

EPFL2022