A new variational line tension model for accurate evaluation of the stress effect on cross-slip energy barrier in face-centered cubic metals

About
Privacy
Disclaimer

Graph Chatbot

Related publications (30)

Modeling of precipitate strengthening with near-chemical accuracy: case study of Al-6xxx alloys

Many metal alloys are strengthened by controlling precipitation to achieve an optimal peak-aged condi-tion where the strength-limiting processes of precipitate shearing and Orowan looping are thought to be comparable. Qualitative models have long captured ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Machine learning for metallurgy IV: A neural network potential for Al-Cu-Mg and Al-Cu-Mg-Zn

William Curtin, Daniel John Gilles Marchand

Most metallurgical properties, e.g., dislocation propagation, precipitate formation, can only be fully understood atomistically but most phenomena and quantities of interest cannot be measured experimentally. Accurate simulation methods are essential but f ...

2022

Determination of Parameters Characteristic of Dynamic Weakening Mechanisms During Seismic Faulting in Cohesive Rocks

Marie Estelle Solange Violay, François Xavier Thibault Passelègue, Chiara Cornelio

While sliding at seismic slip-rates of ∼1 m/s, natural faults undergo an abrupt decrease of shear stress called dynamic weakening. Asperity-scale processes related to flash heating and weakening and, meso-scale (mm-cm) processes involving shear across the ...

AGU2022

Effect of Y2O3 dispersoids on microstructure and creep properties of Hastelloy X processed by laser powder-bed fusion

Christian Leinenbach

Laser powder bed fusion (LPBF) was used to consolidate powders of a Ni-Cr-Fe-Mo alloy (Hastelloy X) blended with 1 wt% Y2O3 nanometric powders. The nearly-dense, crack-free specimens, with and without oxide dispersion strengthening (ODS), exhibit high-aspe ...

ELSEVIER2022

Evolution of deformation twinning mechanisms in magnesium from low to high strain rates

Roland Logé, Cyril Cayron, Johann Michler, Xavier Maeder, Amit Sharma, Nicolò Maria Della Ventura, Manish Jain

We present a systematic investigation of {10 (1) over bar2} extension twinning mechanism in single crystal magnesium micropillars deformed over seven orders of magnitude of strain rate, from 10(-4) to 500 s(-1), revealing how the accommodation of newly for ...

ELSEVIER SCI LTD2022

The thermally activated deformation behaviour of single-crystalline microcast aluminium wires

Andreas Mortensen, Léa Deillon, Suzanne Godelieve Alphonsine Verheyden

A microcasting process is used to produce high aspect ratio ( > 30) monocrystalline pure aluminium wires with a diameter between 14 and 115 mu m. The role of thermal activation in the plastic deformation of these microwires is measured by means of (single) ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Theory of kink migration in dilute BCC alloys

William Curtin, Alireza Ghafarollahi

Plastic deformation in elemental BCC metals and dilute alloys is controlled by the slower of the kink pair nucleation and kink migration processes along screw dislocations. In alloys nucleation is facilitated and migration inhibited, leading to a concentra ...

2021

Theory of twin strengthening in fcc high entropy alloys

William Curtin, Recep Ekin Kubilay

Twinning in fcc High Entropy Alloys (HEAs) has been implicated as a possible mechanism for hardening that enables enhanced ductility. Here, a theory for the twinning stress is developed analogous to recent theories for yield stress. Specifically, the stres ...

2021

Precipitation Strengthening in Al-Mg-Si Alloys

Yi Hu

Precipitation strengthening is one of the key strengthening strategies in many industrial alloys like aluminum alloys, nickel-based superalloys, etc. The yield strength of alloy is improved by forming precipitates in materials and employing them as obstacl ...

EPFL2021

High energy barriers for edge dislocation motion in body-centered cubic high entropy alloys

William Curtin, Recep Ekin Kubilay, Francesco Maresca, Alireza Ghafarollahi

Recent theory proposes that edge dislocations in random body-centered cubic (BCC) high entropy alloys have high barriers for motion, conveying high strengths up to high temperatures. Here, the energy barriers for edge motion are computed for two model allo ...

NATURE RESEARCH2021

Page 2 of 3