Advanced Nano-electromechanical Systems Laboratory

Laboratory

About
Privacy
Disclaimer

Graph Chatbot

Related publications (29)

Ultra low quantum decoherence nano-optomechanical systems

Mohammadjafar Bereyhi

Thermal motion of a room-temperature mechanical resonator typically dominates the quantum backaction of its position measurement. This is a longstanding barrier for exploring cavity optomechanics at room temperature. In order to enter the quantum regime of ...

EPFL2022

A new versatile hybrid MEMS technology for high sensitivity, fluid proof sensing applications

Matthias Neuenschwander

The field of micro electromechanical systems (MEMS) evolved from the microelectronic industry and the technologies developed to fabricate integrated circuits. As a result, MEMS are commonly fabricated on silicon wafers. The development of MEMS has been dri ...

EPFL2022

Optimization of Edge Profile for Improved Anti-Resonance Quality Factor in Lithium Niobate SH0 Resonators

Luis Guillermo Villanueva Torrijo, Silvan Stettler

Thin-film lithium niobate (LNO) has been identified as a promising material platform for enabling high electromechanical coupling and low-loss piezoelectric resonators for filtering applications. In this work, the design and fabrication of fundamental shea ...

IEEE2022

Development of Thin Film Lithium Niobate Shear Bulk Acoustic Wave Resonators

Soumya Yandrapalli

RF MEMS piezoelectric acoustic resonators are the essential building blocks for RF filters used in RF front-end modules for wireless mobile communication due to their compact size in the MHz-GHz frequency range, high Quality factors and large relative band ...

EPFL2022

Piezoelectric suspended microchannel resonators

Damien Maillard

The objective of this PhD thesis is the development of a microfluidic platform for the real-time measurements of the mechanical properties of biological analytes at the single entity level. The systems developed for these purposes consist of piezoelectrica ...

EPFL2022

Scalable fabrication of functional nanostructures on stretchable substrates by capillary-assisted particle assembly and adhesion lithography

Henry Shao-Chi Yu

The fabrication of metallic nanostructures on stretchable substrates enables specific applications that exploit the combination of the nano-scale phenomena and the mechanical tunability of the physical dimensions of the nanostructures. Due to the large dif ...

EPFL2022

Wafer-scale MoS2 with water-vapor assisted showerhead MOCVD

Aleksandra Radenovic, Andras Kis, Mukesh Kumar Tripathi, Mukeshchand Thakur, Michal Daniel Macha, Yanfei Zhao, Hyungoo Ji, Jing Zhang

Among numerous thin film synthesis methods, metalorganic chemical vapor deposition performed in a showerhead reactor is the most promising one for broad use in scalable and commercially adaptable two-dimensional material synthesis processes. Adapting the m ...

ROYAL SOC CHEMISTRY2022

Strained crystalline nanomechanical resonators with quality factors above 10 billion

Tobias Kippenberg, Sergey Fedorov, Alberto Beccari, Nils Johan Engelsen

In strained mechanical resonators, the concurrence of tensile stress and geometric nonlinearity dramatically reduces dissipation. This phenomenon, called dissipation dilution, is employed in mirror suspensions of gravitational-wave interferometers and at t ...

NATURE PORTFOLIO2022

Characterization and Development of Fired Passivating Contacts for Silicon Solar Cells

Mario Joe Lehmann

One of the key elements to improve mainstream crystalline silicon (c-Si) solar cell performance is surface passivation, which is at the center of the ongoing transition from cells with direct silicon-metal contacts to full area passivating contacts. In the ...

EPFL2022

Page 3 of 3

Ultra low quantum decoherence nano-optomechanical systems

Mohammadjafar Bereyhi

EPFL2022

A new versatile hybrid MEMS technology for high sensitivity, fluid proof sensing applications

Matthias Neuenschwander

EPFL2022

Scalable fabrication of functional nanostructures on stretchable substrates by capillary-assisted particle assembly and adhesion lithography

Henry Shao-Chi Yu

EPFL2022