Marco Cantoni1982-1988, Diploma course in Experimental Physics (certificate, 28.10.88)ETHZ Faculty IX MATHEMATICS and PHYSICS, Diploma Thesis: "Abweichungen von der ikosaedrischen Symmetrie in Al-Cu-Li Quasikristallen", Advisor: Prof. H.-U. Nissen 1989-1993, Ph.D. in Experimental Physics (certificate, 23.8.94) ETHZ Physics Department, Laboratory of Solid State Physics, Ph. D. Thesis No. 10421, Title: "Elektronenmikroskopische Untersuchung der Realkristallstruktur epitaktischer Schichten von Supraleitern des Typs SEBa2Cu3O7-x auf (100)-SrTiO3" Advisors: Prof. H.R. Ott, Prof. H. U. Nissen. 1994-1996,ETH Zürich,Material Science Department, Non-Metallic Materials, Prof. L. Gauckler: Microstructure characterisation of high-tech ceramic materials by means of SEM, TEM and atomic force microscopy: superconductor thick films (Bi-2212 on Ag) and solid oxide fuel cells (ZrO2, CeO2). 1996-1998, National Institute for Research in Inorganic Materials NIRIM, Japan Group for Special Research, Prof. S. Horiuchi: TEM of Bi-2223/Ag Tapes, Application of Imaging Plates (IP) in High Voltage TEM, Cryo-Lorentz-TEM of Superconducting Materials (Observation of Flux-Lines) 1998-2000, Ecole polytechnique fédéral de Lausanne, EPFL-CIME Centre interdépartemental de microscopie électronique CIME, Prof. P.A. Buffat: Projet 125, PPO II (programme prioritaire optique): Characterization of materials and devices for optic and optoelectronic applications by electron microscopy. 2001-2003, Ecole polytechnique fédéral de Lausanne, EPFL STI IMX LCCeramics Laboratory, Prof. Nava Setter Characterisation of ferroelectric materials, transmission electron microscopy of relaxor ferroelectric materials 2004, University of Geneva, Physics Department, Condensed matter Physics Group of Prof. R. Flükiger, TEM of Multifilament Nb3Sn superconducting wires, in collaboration with EPFL-CIME Since 1.11.04, EPFL-SB-CIME
Esther AmstadEsther Amstad studied material science at ETH in Zurich. She also carried out her PhD thesis at the same University under the supervision of Prof. Marcus Textor; for her thesis, she worked on the surface modification and steric stabilization of oxide nanoparticles. As a postdoctoral fellow, she joined the experimental condensed soft matter group of David A. Weitz at Harvard University where she used droplet based microfluidics to assemble different types of functional micro- and nanomaterials. In addition, she developped new microfluidic devices that enable the production of very small, airborne drops as well as devices that produce highly monodisperse emulsion drops at a very high throughput. In June 2014, Esther joined the material science department (IMX) of EPFL where she is leading the Soft Materials Laboratory (SMAL).
Katrin BeyerSince 2017 Associate Professor, School of Architecture, Civil and Environmental Engineering (ENAC), EPFL. Head of the Earthquake Engineering and Structural Dynamics (EESD) Laboratory
2010-2017 Assistant Professor, EPFL.
2008-2010 Post-doctoral researcher, ETH Zürich.
2003-2007 Ph.D., Roseschool / Università di Pavia, Italy.
2001-2003 Ove Arup & Partners, Advanced Technology and Research Group, London.
2001 Diploma, Civil engineering, ETH Zürich.
John Richard ThomeJohn R. Thome is Professor of Heat and Mass Transfer at the Swiss Federal Institute of Technology in Lausanne (EPFL), Switzerland since 1998, where his primary interests of research are two-phase flow and heat transfer, covering both macro-scale and micro-scale heat transfer and enhanced heat transfer. He directs the Laboratory of Heat and Mass Transfer (LTCM) at the EPFL with a research staff of about 18-20 and is also Director of the Doctoral School in Energy. He received his Ph.D. at Oxford University, England in 1978. He is the author of four books: Enhanced Boiling Heat Transfer (1990), Convective Boiling and Condensation, 3rd Edition (1994), Wolverine Engineering Databook III (2004) and Nucleate Boiling on Micro-Structured Surfaces (2008). He received the ASME Heat Transfer Division's Best Paper Award in 1998 for a 3-part paper on two-phase flow and flow boiling heat transfer published in the Journal of Heat Transfer. He has received the J&E Hall Gold Medal from the U.K. Institute of Refrigeration in February, 2008 for his extensive research contributions on refrigeration heat transfer and more recently the 2010 ASME Heat Transfer Memorial Award. He has published widely on the fundamental aspects of microscale and macroscale two-phase flow and heat transfer and on enhanced boiling and condensation heat transfer.
