Duncan Thomas Lindsay AlexanderDuncan Alexander graduated with a PhD in Materials Science and Metallurgy at the University of Cambridge in 2003 for a thesis on the kinetics of metallurgical phase transformations under the direction of Lindsay Greer. From 2003 to 2007 he held a Royal Society Overseas Research Fellowship at the University of Sydney, and then post-doctoral positions at the University of Cambridge and Arizona State University, working first on materials electrochemistry with Carsten Schwandt and Derek Fray, and then the characterization of atmospheric aerosol particles with Peter Crozier and Jim Anderson. In 2007 he came to EPFL as a scientific collaborator in the group of László Forró, and from 2008 to 2017 he was a staff scientist at EPFL’s Interdisciplinary Centre for Electron Microscopy (CIME), specializing in the application of advanced transmission electron microscopy techniques and enabling electron microscopy research activities for groups across EPFL through teaching, training and support. In 2018 he joined the Electron Spectrometry and Microscopy Laboratory (LSME) as a full-time research scientist dedicated to advancing transmission electron microscopy techniques, and was promoted to the status of Research and Teaching Associate. In 2019, together with LSME director Cécile Hébert, he launched the first MOOC on transmission electron microscopy for materials science: https://www.coursera.org/learn/microscopy/For a complete list of peer-reviewed publications, see:https://orcid.org/0000-0003-4350-8587 Florian Frédéric Vincent BreiderFlorian Breider obtained his PhD in the field of the stable isotope biogeochemistry from the University of Neuchatel in 2013. This was followed by seven months of postdoc at EPFL in the Atmospheric Particles Research Laboratory and two years as research associate at Tokyo Institute of Technology (Japan) where he conducted studies on nitrous oxide biogeochemistry in oceans. From 2015 to 2018, he was research scientist in the Laboratory for Water Quality and Treatment at EPFL where he conducted research on disinfection by-products and antibiotic resistant bacteria. Since May 2018, he is director of the Central Environmental Laboratory at the Institute of Environmental Engineering of EPFL.
Michel RappazAprès un doctorat en physique du solide (1978) de l’Ecole Polytechnique Fédérale de Lausanne (EPFL), un post-doc à Oak Ridge National Laboratory, Michel Rappaz rejoint l’Institut des matériaux de l’EPFL en 1981. Après un passage de deux ans dans un bureau d’ingénieurs, il revient à l’EPFL en 1984 où il est nommé Professeur titulaire en 1990, puis Professeur ordinaire en 2003. Après sa retraite de l’EPFL en 2015, il est actuellement Professeur émérite et consultant indépendant auprès de divers centres de recherche et industries.
Ses principaux centres d’intérêt sont les transformations de phase et la solidification, en particulier le couplage des aspects macroscopiques de transferts de chaleur et de masse à l’échelle des procédés avec les aspects microscopiques de germination-croissance des microstructures et des défauts. Parmi ses diverses réalisations, on peut mentionner le développement d’Automates Cellulaires couplés avec la méthode d’Eléments Finis (modèle CAFE) pour la prédiction des structures de grains en solidification, le développement de modèles granulaires pour la fissuration à chaud, l’application de la méthode de champ de phase pour la compréhension de diverses microstructures, la découverte de la germination assistée dans certains alliages par des phases quasicrystallines, ainsi que de nombreuses études touchant aussi bien les aspects fondamentaux de formation des structures que des aspects plus appliqués des procédés.
Certains modèles développés dans son laboratoire ont été commercialisés par une spin-off fondée en 1991 (Calcom SA), faisant partie actuellement du groupe français ESI. Michel Rappaz a initié en 1992 un cours annuel de formation continue en solidification, suivi à ce jour par plus de 900 participants venant d’une quarantaine de pays. Il collabore actuellement avec une autre spin-off du laboratoire fondée en 2014, Novamet SàrL.
Michel Rappaz a reçu de nombreux prix et distinctions, en particulier le prix Mathewson de co-auteur (1994) et auteur (1997) de l’American Mineral, Metals and Materials Society (TMS), le prix de la fondation Koerber avec les Profs Y. Bréchet et M. Asbby (1996), la médaille Sainte-Claire Deville (1996) et la Grande Médaille (2011) de la Société Française des Matériaux (SF2M), le prix Bruce Chalmers de la TMS (2002), le prix Mc Donald Memorial Lecture du Canada (2005), la médaille d’or de la Société Européenne des Matériaux (FEMS, 2013) et le prix Brimacombe de la TMS (2015). Il fait partie des “Highly-Cited Authors” de ISI, il est fellow des sociétés ASM, IOP et TMS, et a écrit plus de 200 publications et deux livres.
Francesco StellacciFrancesco Stellacci graduated in Materials Engineering at the Politecnico di Milano in 1998 with a thesis on photochromic polymers with Prof. Giuseppe Zerbi and Mariacarla Gallazzi. In 1999 he moved to the Chemistry Department of the University of Arizona for as a post-doc in the group of Joe Perry in close collaboration with the group of Seth Marder. In 2002 he moved to the Department of Materials Science and Engineering at the Massachusetts Institute of Technology as an assistant professor. He was then promoted to associate without (2006) and with tenure (2009). In 2010 he moved to the Institute of Materials at EPFL as a full Professor. He holds the Alcan EP Chair. Francesco was one of the recipients of the Technology Review TR35 "35 Innovator under 35" award in 2005, and the Popular Science Magazine "Brilliant 10" award in 2007. He has been a Packard Fellow starting 2005.
Jürg Alexander SchiffmannAfter obtaining his diploma in mechanical engineering from EPFL in 1999 he co-founded a start-up company dedicated to the design of gas bearing supported rotors. In 2005 he joined Fischer Engineering Solutions where he led the development of small-scale, gas bearing supported high-speed turbomachinery for fuel cell air supplies and for domestic scale heat pumps. In parallel he worked on his PhD, which he obtained from EPFL in 2008 and for which he was awarded the SwissElectric Research Award. He then joined the Gas Turbine Lab at MIT as a postdoctoral associate where he worked on foil bearings and on the experimental investigation of radial diffusers. In 2013 he was nominated assistant professor at the Ecole Polytechnique Fédérale de Lausanne where he founds the Laboratory for Applied Mechanical Design. His current research interest are in gas lubricated bearings, in aerodynamics of small-scale compressors and turbines and in automated design and optimization methodologies.
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
