Ingénierie de fiabilité

Applied sciences
Industrial and production e...
Ingénierie de fiabilité
Ingénierie de fiabilité

Publications associées (30)

À propos
Confidentialité
Mentions légales

Graph Chatbot

Considerations on the partial safety factor format for reinforced concrete structures accounting for multiple failure modes

Aurelio Muttoni, Miguel Fernández Ruiz, Qianhui Yu

The increasing usage of nonlinear analyses for the design of reinforced concrete structures and the necessity of codes of practice to provide a consistent safety format for them is one of the challenges that new generations of codes of practice are facing. ...

ELSEVIER SCI LTD2022

Data-based model maintenance in the era of industry 4.0: A methodology

Dimitrios Kyritsis, Antoine Pélissier, Foivos Psarommatis Giannakopoulos

Despite the high number of investments for data-based models in the expansion of Industry 4.0, too little effort has been made to ensure the maintenance of those models. In a data-streaming environment, data-based models are subject to concept drifts. A co ...

ELSEVIER SCI LTD2022

Shear Response of Wet Weak Carbonate Rock/Grout Interfaces Under Cyclic Loading

Eleni Stavropoulou

The development and construction of offshore wind farms requires the correct estimation of the friction that can be mobilised at the rock/grout interface. In conventional studies, the shear behaviour of a joint is usually investigated with laboratory tests ...

2021

Uncertainties in the Seismic Assessment of Historical Masonry Buildings

Katrin Beyer, Francesco Vanin, Igor Tomic

Seismic assessments of historical masonry buildings are affected by several sources of epistemic uncertainty. These are mainly the material and the modelling parameters and the displacement capacity of the elements. Additional sources of uncertainty lie in ...

2021

Casting position effects on bond performance of reinforcement bars

Aurelio Muttoni, Miguel Fernández Ruiz, Francesco Rafael Alberto Moccia

The phenomena associated with the consolidation of fresh concrete (bleeding and plastic settlement) are commonly considered significant for the bond performance of reinforcement. However, rules to take care of such influence for design are not consistent a ...

ERNST & SOHN2021

Origami-inspired carbon fiber-reinforced composite sandwich materials - Fabrication and mechanical behavior

Thomas Keller, Yuntong Du

A folding fabrication method inspired by origami for carbon fiber-reinforced composites to fabricate three-dimensional structures is presented. PMI foams serve as substrates, making it possible to manufacture this kind of origami-inspired composite sandwic ...

ELSEVIER SCI LTD2021

Study on Mechanical Performance of Prestressed UHPFRC U-Beam Bridges

Eugen Brühwiler

The forms of U-shaped UHPFRC beams have not been investigated for the highway footbridge. Compared with the traditional section forms, the U-shaped UHPFRC beams can reduce the material consumption under the condition of providing the same bearing capacity. ...

2021

Ontology for Strategies and Predictive Maintenance models

Dimitrios Kyritsis, Gökan May, Sangje Cho, Marlène Hildebrand-Ehrhardt

As of today, to cope with traditional maintenance policies such as reactive and preventive maintenance, the manufacturing companies need the deployment of adaptive and responsive maintenance strategies. Meanwhile, the advent of Industry 4.0 leads the maint ...

ELSEVIER2020

Statistical Fatigue Investigation and Failure Prediction of a Healable Composite System

Véronique Michaud, Amaël Maximilien Cohades, Nathan Klaus Hostettler

Fiber reinforced polymers are massively used as an alternative to metals in structural applications. The brittle nature of their matrix, however, makes them more susceptible to crack formation and propagation resulting in costly repair operations and incre ...

2020

A state of the art of flat-slab frame tests for gravity and lateral loading

Aurelio Muttoni, António Manuel Pinho Ramos

This paper presents a critical review of the state of the art of experimental research concerning the seismic response of reinforced concrete flat slab frames. After a summary of tests on connections, the paper examines tests carried out on frames with gra ...

ERNST & SOHN2020

Page 2 sur 3

Considerations on the partial safety factor format for reinforced concrete structures accounting for multiple failure modes

Aurelio Muttoni, Miguel Fernández Ruiz, Qianhui Yu

ELSEVIER SCI LTD2022