Électronique de puissance | EPFL Graph Search

vignette|Un thyristor 100 ampères/800 volts en boîtier à vis et un thyristor / en boîtier TO-220. vignette|Valves de la ligne HVDC Nelson River DC Transmission System. L'électronique de puissance est une branche de l'électronique et de l'électrotechnique qui traite les puissances élevées et (convertisseurs) et de les commuter, avec ou sans commande de cette puissance. L'électronique de puissance comprend l'étude, la réalisation et la maintenance :

des composants électroniques utilisés en forte puissance ;
des structures, de la commande et des applications des convertisseurs d’énergie.

Généralités L'électronique de puissance, ou plus correctement « électronique de conversion d'énergie », a moins de . Elle a connu un tel essor qu'aujourd'hui près de 15 % de l'énergie électrique produite est convertie sous une forme ou une autre. Au cours de ces années, la taille, le poids et le coût des convertisseurs n'ont fait que diminuer, en grande partie grâce aux progrès faits dan

Contribution to the active generator principle for high power electric supply

Massimiliano Visintin

In recent years the use of solid state frequency converters is rapidly increasing in the industrial and power plants where electric machines are installed, since it allows variable speed operations for the electric system, thus becoming a key factor which is capable of increasing the overall efficiency, as well as the global plant flexibility. The benefits that can be reached when electric motors are under investigation can be so enticing, in particular from the perspective of the operating machine coupled to the motor, that drawbacks take a back seat and can be overcome. On the contrary, power electronic for variable speed is generally not used in power generation, since the gains brought out by the present technology are not sufficient to attract anyone's interest. There are some exceptions in the wind- and the hydro power plant businesses, where there are some cases of variable speed already introduced. However in the former applications the output power is limited to some MW, while in the latter the converter is sized only to a fraction of the whole generating power, since it feeds the machine's rotor.This dissertation investigates on a possible electronic converter for power generation in the 40 MW range and above, which is also attracting from both the cost's and the efficiency's point of view, as well as from the operation reliability perspective and thus may be proposed as a breakthrough in this field. Among the possible frequency converters, those ones have been selected which perform natural commutations only, i.e. those that employ thyristors as the semiconductor devices, since the efficiency, the robustness and the relatively high performances are actually the key success factors to be addressed from the beginning. Well known matrix converter topologies will be referred to, as well as new matrix converter arrangements will be brought out and analyzed: their behaviours will be targeted by the dissertation, in particular when different strategies are adopted for controlling the operations. Specifically comparisons will be carried out when the same converter topology is used, but driven by either the well-known cycloconverter strategy or the newly brought out "active generator" one. In addition several generator winding arrangements will be proposed and analyzed, with the aim of increasing the actual feasibility of the proposed solution. Finally some test results on a sized down experimental rig will be analyzed and compared to the simulation outcomes.

EPFL2006

Modular DC/DC Converter for DC Distribution and Collection Networks

Stephan Kenzelmann

A major change in the electrical transmission and distribution system is taking place in Europe at the moment. The shift from a centralised energy production to a distributed generation profoundly changes the behaviour of the grid. Environmental or social issues associated with the construction of new power lines to relieve bottlenecks, together with aged equipment dating from the 1960s, pose some serious challenges to government, the research community and the economy. Concepts of reactive compensation, harmonic cancellation, voltage stability, power quality and bulky low-frequency transformers need to be redefined for power exchange and transmission in the future. Photovoltaics, wind turbines, fuel cells, storage systems and uninterruptible power supplies use many power electronic interface circuits, where DC intermediate levels already exist. Large photovoltaic- or wind- powered installations, which are connected to a cable network, are characterised by non-negligible distances due to their low power-by-surface density. On the side of the consumer, current trends show an increasing use of DC in end-user equipment. In such a context, the numerous advantages of power electronics and DC cables may sometimes out-weigh their higher cost. In the future, high-power semiconductor devices that allow higher switching frequencies of the converters may make it possible to down-size even more the passive components. This would significantly reduce raw material consumption and therefore cost, something that is crucial for the market to accept the technology. In the first part of this PhD thesis, the advantages of DC distribution in terms of transmission losses are illustrated with the help of three case studies. The second part and the main contribution of this thesis is the analysis of a promising candidate for a power electronic transformer, the key component of any DC based grid. It is a bidirectional isolated DC/DC converter based on modular multilevel converters, which are well suited for medium or even high voltage range. The motivation was to investigate a converter operation with important voltage elevation ratios, capable of adapting the voltage level between low, medium and high voltage. A medium-frequency isolation stage provides the possibility of downsizing the passive components. Two modulation methods, a multilevel and a two-level operation, were analysed and compared in terms of losses. The modular DC/DC converter is an attractive solution for the sensitive aspect of the short-circuit behaviour of classical DC links and power lines. The converter can also handle short circuits without the need for additional protection devices, such as circuit breakers. Given the many advantages of DC systems (reduced environmental impact, reduced space requirements, reduced raw material use, high power quality, power flow control, low transmission losses), this new technology must, at least, be considered when assessing the extension or the renovation of conventional AC grids.

EPFL2012

Proposal and Validation of Medium-Frequency Power Transformer Design Methodology

Alfred Rufer, Irma Villar

Power electronics is continuously evolving toward higher power densities. Consequently, volume, weight, and material reduction are becoming major design issues, which lead the research focus toward high/medium-frequency power conversion systems. This paper presents a direct and simple design methodology aimed at reaching the best medium-frequency power transformer solution for a given application. Besides maximum power loss or minimum volume requirements, the value of the leakage inductance is adjusted within the design methodology, essential for proper operation of most medium-frequency conversion systems. The proposed design methodology has been applied and experimentally verified on a small scale prototype.

2011