Publications associées à Fragilisation par l'hydrogène

Using video detection of snow surface movements to estimate weak layer crack propagation speeds

Johan Alexandre Philippe Gaume, Bertil Trottet, Alec van Herwijnen

Dry-snow slab avalanches release due to crack propagation in a weak snow layer under a cohesive snow slab. Crack propagation speeds can provide insights into the potential size of avalanches and inform fracture and avalanche release models. Despite their i ...

CAMBRIDGE UNIV PRESS2023

Natural aging and vacancy trapping in Al-6xxx

William Curtin, Michele Ceriotti

Undesirable natural aging (NA) in Al-6xxx delays subsequent artificial aging (AA) but the size, composition, and evolution of clustering are challenging to measure. Here, atomistic details of early-stage clustering in Al-1% Mg-0.6%Si during NA are studied ...

Springer Heidelberg2023

Delayed Hydride Cracking in Irradiated and Unirradiated Zircaloy-2 Cladding

Aaron William Colldeweih

Zirconium alloys used in the nuclear industry are exposed to extreme conditions undergoing high levels of irradiation damage and corrosion. Zircaloy-2 is used as nuclear fuel cladding in boiling water reactors and for the encapsulation of the spallation ta ...

EPFL2022

Experimental investigation of dowel action using advanced measurement techniques

Aurelio Muttoni, Marko Pejatovic

Existing shear-cracked structures need to be reliably verified in order to avoid redundant interventions. Code provisions often raise shear safety and/or fatigue life concerns of the reinforcement subjected to stress concentrations due to cyclic dowel acti ...

2022

Crack propagation speeds in weak snowpack layers

Johan Alexandre Philippe Gaume, Jürg Schweizer, Bertil Trottet, Grégoire Bobillier, Alec van Herwijnen

For the release of a slab avalanche, crack propagation within a weak snowpack layer below a cohesive snow slab is required. As crack speed measurements can give insight into underlying processes, we analysed three crack propagation events that occurred in ...

CAMBRIDGE UNIV PRESS2021

Laser powder-bed fusion of metallic alloys with enhanced microstructures and properties

Navid Sohrabi

Laser powder-bed fusion (LPBF) is an additive manufacturing (AM) process that uses a laser to selectively melt a powder bed. This process can build dense samples with complicated geometries from a wide variety of metallic alloys. In this thesis, LPBF of al ...

EPFL2021

Micro-mechanical insights into the dynamics of crack propagation in snow fracture experiments

Johan Alexandre Philippe Gaume, Jürg Schweizer, Grégoire Bobillier, Alec van Herwijnen

Dry-snow slab avalanches result from crack propagation in a highly porous weak layer buried within a stratified and metastable snowpack. While our understanding of slab avalanche mechanisms improved with recent experimental and numerical advances, fundamen ...

NATURE RESEARCH2021

APT/TEM characterization of the element segregation in ferritic/martensitic steels after irradiation in SINQ

Lijuan Cui

Ferritic /martensitic (FM) steels are among the most important materials in various nuclear applications. As radiation-induced segregation (RIS) is one of the major factors for embrittlement of nuclear materials, thereofre it is essential to study the RIS ...

EPFL2021

A decohesion pathway for hydrogen embrittlement in nickel: Mechanism and quantitative prediction

William Curtin, Xiaoqing Zhou, Ali Tehranchi

Hydrogen embrittlement (HE) is a ubiquitous and catastrophic mode of fracture in metals. Here, embrittlement is considered as an intrinsic ductile-brittle transition at the crack tip, where H at the crack tip can reduce the stress intensity K-Ic for cleava ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Combining alloy and process modification for micro-crack mitigation in an additively manufactured Ni-base superalloy

Roland Logé, Christian Leinenbach, Jamasp Jhabvala, Xavier Maeder, Hossein Ghasemi Tabasi, Toni Ivas, Rafal Wróbel

The additive manufacturing (AM) of the gamma' precipitation strengthened Ni-base superalloys still remains a challenge due to their susceptibility to micro-cracking. Post-processing, such as HIPing, has been shown to heal the micro-cracks but it remains de ...

ELSEVIER2020