Concept
Moulage en sable
Personnes associées (28)
Jean-Marie Drezet
1992-1996: travail de thèse au Laboratoire de Métallurgie Physique sous la direction du Prof. Michel Rappaz, http://library.epfl.ch/theses/?display=detail&nr=1509 1997-2000: projet EMPACT (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: projet VIRCAST (European Virtual Casting) 2005-2006: projet Etude du sciage des barres à laminer (Alcan Fonds) 2005-2006: projet WelAIR (Welding of Airframes, EADS) 2005-2008: soudage faisceau d'électrons des Cu-Cr-Zr (CEA, France) 2006-2008: soudage laser des Al-Li (EADS, France) 2008-2011: co-direction avec le Prof. A. Nussbaumer de la thèse de C. Acevedo sur l'influence des contraintes residuelles sur le desgin en fatigue des joints tubulaires soudés, http://library.epfl.ch/theses/?nr=5056 2007-2011: co-direction avec le Prof. J.-F. Molinari de la thèse de K. Shahim sur la dilatation ventriculaire dans l'hydrocéphalie à pression normale (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-direction avec le Prof. M. Rappaz de la thèse de M. Sistaninia sur la simulation de la fissuration par modèles granulaires (Projet CCMX-MERU) 2010-2014: direction avec le Prof. M. Rappaz de la thèse de N. Chobaut sur la simulation des contraintes lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU) 2011-2015: direction avec le Prof. H. Van Swygenhoven-Moens de la thèse de P. Schloth sur l'étude de la précipitation lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU)
Lyesse Laloui
Director, EPFL Soil Mechanics LaboratoryDirector, EPFL Civil Engineering SectionEditor in Chief, ElsevierMember of the Swiss Academy of Engineering SciencesFounding Partner, Geoeg & MeduSoilActive in academic research in the following institutions: Lausanne, EPFL, Durham, Duke University, Nanjing, Hohai UniversityProfessor Lyesse Laloui teaches at EPFL, where he directs the Soil Mechanics Laboratory as well as the Civil Engineering Section. He is a founding partner of the international engineering company Geoeg, and the start-up MeduSoil. In addition, he is an adjunct professor at Duke University, USA and an advisory professor at Hohai University, China as well as honorary director of the International Joint Research Center for Energy Geotechnics in China.He is the recipient of an Advance ERC grant for his BIO-mediated GEO-material Strengthening project. Editor in Chief of the Elsevier Geomechanics for Energy and the Environment journal, he is a leading scientist in the field of geomechanics and geo-energy. He has written and edited 13 books and published over 320 peer reviewed papers; his work is cited more than 6000 times with an h-index of 39 (Scopus). Two of his papers are among the top 1% in the academic field of Engineering. He has given keynote and invited lectures at more than 40 leading international conferences. He has received several international awards (IACMAG, RM Quigley, Roberval) and delivered honorary lectures (Vardoulakis, Minnesota; G.A. Leonards, Purdue; Kersten, Minnesota). He recently acted as the Chair of the international evaluation panel of Civil and Geological Engineering R&D Units of Portugal.Nov. 2019 For further information visit www.epfl.ch/labs/lms/ ; geoeg.net ; medusoil.com
Cyril Cayron
Mes recherches: J'ai travaillé comme microscopiste/cristallographe/métallurgiste sur des projets très variés comme les aciers pour le nucléaire, les alliages titane et nickel pour l'aéronautique, les interconnections en cuivre pour la microélectronique, les piles à combustible haute et basse température, le silicium photovoltaïque hétérojonction et monolike, les batteries au lithium à base de LiFePO4 et silicium. Derrière la plupart de ces sujets de recherche appliquée se cachent des problèmes de recherche fondamentale comme celui lié aux transformations de phases. J'ai donc été amené à travailler sur ce sujet passionnant et j'ai pu démontrer que les variants cristallographiques générés par des transitions structurales forment une structure algébrique de groupoïde. Ces travaux ont mené au développement du logiciel de reconstruction des grains parents à partir de données EBSD appelé ARPGE et distribué dans plus de 20 pays. En 2013-2015 j'ai proposé un nouveau modèle cristallographique pour les transformations martensitiques fcc-bcc dans les aciers, comme une alternative à la théorie phénoménologique de la transformation martensitique. Ce modèle a été depuis étendu aux transformations fcc-hcp (type cobalt), bcc-hcp (type titane) et bcc-fcc (type laiton), ainsi qu’à differents modes de maclage mécanique dans les métaux fcc et hcp. Ce modèle à sphères dures montre que la transformation implique une «distorsion angulaire», forme plus générale que le cisaillement. Le modèle prévoit la possibilité que le plan d’interface de certaines macles mécaniques ne soit pas un plan invariant. Un tel cas de maclage « exotique » a été observé expérimentalement par EBSD en 2017 dans un monocristal de magnésium pur. Je travaille maintenant à définir de manière algébrique les concepts de variants (orientation, distortion, correspondance), et sur les types de macles mécaniques (I, II, et d'autres oubliés des théoriques classiques). Mon parcours : 2014-maintenant: Collaborateur scientifique à l'EPFL/LMTM, Neuchâtel, Suisse. J'aide le professeur Roland Logé dans ses travaux de recherche sur les liens entre les fortes déformations, les textures, les tailles de grains et les transformations de phases (diffusives et displacives). Je suis en charge de la salle de métallographie et des caractérisations SEM, EDS, EBSD, TEM, HRTEM. Je codirige trois thèses (Annick Baur, Margaux Larcher, Céline Guidoux). Je suis reviewer pour Acta Mater., Scripta Mater., Acta Cryst., J. Appl. Cryst., Mater. Charact., etc. 2000-2014: Ingénieur de recherche et responsable du groupe Nanocaractérisation, CEA/LITEN, Grenoble, France. 2012 : Habilitation à Diriger des Recherches (HDR). 1996-2000: Thèse sur l'étude par microscopie électronique de composites à matrice aluminium. Directeur de thèse Philippe Buffat, CIME, EPFL, Lausanne, Suisse. J'ai pu montrer un lien cristallographique entre différentes phases des alliages 2xxx et 6xxx et proposer pour la première fois une structure complète pour la phase beta prime des nanoprécipités. 1995-1996: Scientifique du contingent, travail sur les écrans électrochromes, COGIDEV, Rueil-Malmaison, France, fondé par M. André Giraud, ancien ministre de la défense et ancien ministre de l’industrie. 1992-1995: Ecole Nationale Supérieure des Mines de Nancy, France
Andreas Mortensen
Andreas Mortensen is currently Professor and Director of the Institute of Materials at the Swiss Federal Institute of Technology in Lausanne (EPFL), where he heads the Laboratory for Mechanical Metallurgy. He joined the faculty of EPFL 1997 after ten years, from 1986 to 1996, as a member of the faculty of the Department of Materials Science and Engineering at the Massachusetts Institute of Technology, where he held the successive titles of ALCOA Assistant Professor, Associate Professor, and Professor. His research is focussed on the processing, microstructural development and mechanical behavior of advanced metallic materials with particular focus on metal matrix composites and metal foams, on infiltration processing and capillarity, and on damage and fracture in metallic materials. He is author or co-author of two monographs, around one hundred and eighty scientific or technical publications and twelve patents. Born in San Francisco in 1957, of dual (Danish and US) nationality, Andreas Mortensen graduated in 1980 from the Ecole Nationale Supérieure des Mines de Paris with a Diplôme dIngénieur Civil, and earned his Ph.D. in the Department of Materials Science and Engineering at MIT in 1986. Besides his academic employment, he was a postdoctoral researcher at Nippon Steel during part of 1986, and was invited professor at the Ecole des Mines in Paris during the academic year 1995 to 1996. He is a member of the editorial committee of International Materials Reviews and has co-edited four books. He is a Fellow of ASM, a recipient of the Howe Medal and the Grossman Award of the American Society of Metals, was awarded the Péchiney Prize by the French Academy of Sciences and the Res Metallica Chair from the Katholieke Universiteit Leuven, received three EPFL teaching awards, is one of ISIs Highly Cited authors for Materials Science since 2002 and was awarded an ERC advanced grant in 2012.
Jürgen Brugger
I am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
François Maréchal
Look at the
researcher id
Philippe Buffat
Born in Lausanne (Switzerland) in 1942. EPUL physics engineer diploma in 1967 and EPFL PhD in physics in 1976. From 1966 he studies at the Experimental Physics Laboratory (Prof. J.P. Borel) the physical properties peculiar to the very small size metal crystals and gets a PhD degree for his thesis "Abaissement de la température de fusion de petits cristaux d'or par effet de taille thermodynamique" (Lowering of the melting temperature of small gold crystals by thermodynamic size effect). In 1971, he starts to develop an electron microscopy facility available to all EPFL students and researchers (nowadays Centre Interdisciplinaire de Microscopie Electronique CIME) that he manages till 2007. In parallel he teaches the principles of electron microscopy and the Experimental methods of physics at the Physics/Basic Sciences School (SB). In addition, he trains a large part of the facility users. Honorary professor BS/EPFL he carries-out a free-lance research at CIME and in collaboration with the Institute of Crystallography of the Russian Academy of Sciences (ICRAS, Moscow) and the International Centre of Electron Microscopy for Material Science (IC-EM AGH Krakow) This activity covers all the techniques related to transmission and scanning electron microscopy applied to materials science and solid-state physics. His interest is directed towards the structure of nanocrystals, their size effects and behavior under strong electron irradiation, the phase transitions in perovskites, the characterization of nanophases, multilayer and interface structures of crystalline materials and bioceramics. More recently a large research part has moved to understanding/pointing-out the adequacy between the limits of the instruments and their interpretation means in regard of their use in a multiusers facility with a large turnover and a wide range of materials/structures. He is past-president (2006-2007) of the Société Française des Microscopies (Sfµ), honorary member of the Sfµ and of the Swiss Society of Optics and Microscopy (SSOM).