Publications associées à Module d'élasticité isostatique

Dataset for "Complexity of crack front geometry enhances toughness of brittle solids"

John Martin Kolinski, Chenzhuo Li, Xinyue Wei

This data package supports the publication 'Complexity of crack front geometry enhances toughness of brittle solids' by Xinyue Wei, Chenzhuo Li, Cían McCarthy, and John M. Kolinski Nature physics (2024) - https://doi.org/10.1038/s41567-024-02435-x DOI: 1 ...

Zenodo2024

A pre-fatigue training strategy to stabilize LiCoO2 at high voltage

Lei Zhang, Kangning Zhao, Rui Xia

Layered cathodes are among the most promising cathodes for high-energy-density Li-ion batteries, yet hindered by the structural degradation from both bulk strain and surface oxygen loss at high voltage (above 4.5 V). Herein, we report a pre-fatigue trainin ...

Cambridge2024

Nanoindentation of embedded particles

Andreas Mortensen, Alejandra Inés Slagter, Joris Pierre Everaerts

We address the effect of elastic inhomogeneity on elastic modulus and hardness determinations made by depth-sensing indentations performed on individual particles embedded within a matrix of different elastic modulus. Finite element simulations and nanoind ...

SPRINGER HEIDELBERG2023

On the bulk compressibility of close-packed particles and their composites

Andreas Mortensen, Maria Gabriella Tarantino

The hydrostatic compaction of composites comprising a closely-packed particle-bed filled by a dense matrix is measured experimentally using a fluid-pressurization apparatus. A highly compliant polymer or pure aluminium are infiltrated into preforms of pack ...

ELSEVIER SCI LTD2022

Bragg edge tomography characterization of additively manufactured 316L steel

Roland Logé, Christian Leinenbach, Efthymios Polatidis, Markus Strobl, Nikola Kalentics

In this work we perform a neutron Bragg edge tomography of stainless steel 316L additive manufacturing samples, one as built via standard laser powder bed fusion, and one using the novel three-dimensional (3D) laser shock peening technique. First, we consi ...

AMER PHYSICAL SOC2022

Thermophysical and thermomechanical properties of basalt-phenolic FRP rebars under high temperature

Thomas Keller, Hongwei Zhu, Ting Li, Jiahui Shen

An experimental investigation was conducted on the thermophysical and thermomechanical properties of phenolic-basalt fiber-reinforced polymer (P-BFRP) rebars subjected to high temperature. As a comparison, vinylBFRP (V-BFRP) and epoxy-BFRP (E-BFRP) rebars ...

ELSEVIER SCI LTD2022

Antiferromagnetic resonance in a-Fe2O3 up to its Neel temperature

Jean-Philippe Ansermet, Haiming Yu, Marcin Bialek

Hematite (alpha-Fe2O3) is an antiferromagnetic material with a very low spin damping and high Neel temperature. The temperature dependence of the antiferromagnetic resonance in a bulk single crystal of hematite was characterized from room temperature up to ...

AIP Publishing2022

Computational micromechanics of porous brittle solids

Johan Alexandre Philippe Gaume, Henning Löwe, Lars Kristoffer Uhlen Blatny, Stephanie Wang

Porous brittle solids evidence complex mechanical behavior, where localized failure patterns originate from mechanical processes on the microstructural level. In order to investigate the failure mechanics of porous brittle solids, we outline a general stoc ...

2021

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Module d'élasticité isostatique

Dataset for "Complexity of crack front geometry enhances toughness of brittle solids"

A pre-fatigue training strategy to stabilize LiCoO2 at high voltage

Nanoindentation of embedded particles

On the bulk compressibility of close-packed particles and their composites

Bragg edge tomography characterization of additively manufactured 316L steel

Thermophysical and thermomechanical properties of basalt-phenolic FRP rebars under high temperature

Beyond potentials: Integrated machine learning models for materials

Antiferromagnetic resonance in a-Fe2O3 up to its Neel temperature

The ratio of shear to elastic modulus of in-plane loaded masonry (vol 53, 40, 2020)

Computational micromechanics of porous brittle solids

Graph Chatbot

Chattez avec Graph Search

Nanoindentation of embedded particles

Bragg edge tomography characterization of additively manufactured 316L steel

Antiferromagnetic resonance in a-Fe2O3 up to its Neel temperature

A pre-fatigue training strategy to stabilize LiCoO2 at high voltage

Computational micromechanics of porous brittle solids

Dataset for "Complexity of crack front geometry enhances toughness of brittle solids"

On the bulk compressibility of close-packed particles and their composites

The ratio of shear to elastic modulus of in-plane loaded masonry (vol 53, 40, 2020)

Beyond potentials: Integrated machine learning models for materials

Thermophysical and thermomechanical properties of basalt-phenolic FRP rebars under high temperature