Publications associées à Procédé Martin-Siemens

Micromechanics of oxide inclusions in ferrous alloys

Oxide inclusions are inevitably present in steel as a direct consequence of the steelmaking process; as a result, a cubic centimetre of modern steel will generally contain about a million of these hard and brittle micrometre-sized ceramic particles. Inclus ...

EPFL2023

Improved Waste Heat Management and Energy Integration in an Aluminum Annealing Continuous Furnace Using a Machine Learning Approach

François Maréchal, Daniel Alexander Florez Orrego, Réginald Germanier, Mohammad Andayesh, Manuele Gatti

Annealing furnaces are critical for achieving the desired material properties in the production of high-quality aluminum products. In addition, energy efficiency has become more and more important in industrial processes due to increasing decarbonization r ...

2023

Enhanced Leaching of Zinc Ferrite by the Formation of a Solid Solution With Magnetite in Hydrochloric Acid Solution

The high zinc and iron contents of electric arc furnace (EAF) dust in the forms of zinc ferrite (ZnFe2O4) and magnetite (Fe3O4) make it a valuable secondary source of these metals. ZnFe2O4 and Fe3O4 are known to form a solid solution at all compositions, a ...

SPRINGER2023

The role of Zn in C-S-H atomic structure, nucleation and growth

Anna Morales Melgares

The most promising solution towards cementitious materials with a lower carbon footprint is the partial substitution of the clinker by supplementary cementitious materials (SCMs) such as fly ash, blast furnace slag, limestone and calcined clays. The produc ...

EPFL2023

Report of RILEM TC 267-TRM phase 3: validation of the R-3 reactivity test across a wide range of materials

Karen Scrivener, Ruben Anton Snellings, Alastair Thomas Matthew Marsh, François Henri Avet, Mohsen Ben Haha, Xuerun Li, Pawel Tadeusz Durdzinski, Diana Londoño Zuluaga

RILEM TC 267 TRM- "Tests for Reactivity of Supplementary Cementitious Materials" recommends the Rapid Reliable Relevant (R-3) test as a method for determining the chemical reactivity of supplementary cementitious materials (SCMs) in Portland cement blends. ...

SPRINGER2022

The effect of alkali hydroxides and equilibration time on Al uptake by calcium silicate hydrates (C-S-H)

Sonya Barzgar

Cement production accounts for approximately 8% of man-made CO2 emissions. Lowering these CO2 emissions is currently one of the most important and urgent research topics within the cement community. To reduce these emissions, the Portland cement (PC) is pa ...

EPFL2021

Multi-physical characterization of cellular ceramics for high-temperature applications

Ehsan Rezaei

The use of cellular ceramics in enhancing the performance of a high-temperature latent heat thermal energy storage unit was investigated. A detailed design methodology is presented, which consists of a combined analytical-numerical analysis followed by a m ...

EPFL2020

Reactivity tests for supplementary cementitious materials: RILEM TC 267-TRM phase 1

Karen Scrivener, Ruben Anton Snellings, Mohsen Ben Haha, Xuerun Li, Mathieu Antoni, Shashank Bishnoi, Anuj Parashar, Yuvaraj Dhandapani

A primary aim of RILEM TC 267-TRM: Tests for Reactivity of Supplementary Cementitious Materials (SCMs) is to compare and evaluate the performance of conventional and novel SCM reactivity test methods across a wide range of SCMs. To this purpose, a round ro ...

SPRINGER2018

Preparation for commissioning of materials detritiation facility at Culham Science Centre

Olivier Sauter, Ambrogio Fasoli, Basil Duval, Stefano Coda, Martinus Gijs, Jonathan Graves, Yves Martin, Duccio Testa, Patrick Blanchard, Bruno Emanuel Ferreira De Sousa Correia

The Materials Detritiation Facility has been designed to thermally treat solid non-combustible radioactive waste produced during operations of the Joint European Torus (JET) that is classified as Intermediate Level Waste in the UK due to its tritium invent ...

2018

Early-stage oxidation behavior at high temperatures of SiSiC cellular architectures in a porous burner

Sophia Haussener, Ehsan Rezaei, Alberto Ortona

Early stage oxidation behavior of SiSiC cellular lattices with different cell types was studied at 1400 degrees C in two different environments: a porous burner and an electric furnace with stagnant air. Oxidation and silicon alloy bead formation were obse ...

Elsevier2016