Êtes-vous un étudiant de l'EPFL à la recherche d'un projet de semestre?

Travaillez avec nous sur des projets en science des données et en visualisation, et déployez votre projet sous forme d'application sur GraphSearch.

Découvrez-en plus sur les applications Graph.

Graph
Search

fr|en

Se Connecter

Concept

Mass flux

Résumé

In physics and engineering, mass flux is the rate of mass flow. Its SI units are kg m−2 s−1. The common symbols are j, J, q, Q, φ, or Φ (Greek lower or capital Phi), sometimes with subscript m to indicate mass is the flowing quantity. Mass flux can also refer to an alternate form of flux in Fick's law that includes the molecular mass, or in Darcy's law that includes the mass density. Sometimes the defining equation for mass flux in this article is used interchangeably with the defining equation in mass flow rate. For example, Fluid Mechanics, Schaum's et al uses the definition of mass flux as the equation in the mass flow rate article. Definition Mathematically, mass flux is defined as the limit j_m = \lim_{A \to 0} \frac{I_m}{A}, where I_m = \lim_{\Delta t \to 0} \frac{\Delta m}{\Delta t} = \frac{dm}{dt} is the mass current (flow of mass m per unit time t) and A is the area

Source officielle

https://en.wikipedia.org/wiki/Mass_flux

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Publications associées (48)

Publications associées

Chargement

Personnes associées (12)

Personnes associées

Chargement

Unités associées (3)

Unités associées

Chargement

Concepts associés (1)

Concepts associés

Chargement

Cours associés (11)

Cours associés

Chargement

Séances de cours associées (18)

Séances de cours associées

Chargement

Multi-microchannel evaporators used for the cooling of high heat flux electronics have been of interest to both industry and academia for more than a decade. Such interest has sparked a large number of research studies on the flow boiling pressure drop and heat transfer in multi-microchannel evaporators. However, there are still several aspects that need to be addressed in order to better understand the complicated flow boiling process taking place in such micro-evaporators. Firstly, the mechanism governing flow boiling heat transfer in microchannels is arguable; secondly, the availability of fine-resolution local heat transfer data is very limited; thirdly, over-simplified heat conduction models are used in the literature to reduce such local heat transfer data; finally, rare attention has been taken on the thermal behavior of such micro-evaporators under transient status.\ Inspired by the forgoing aspects, an extensive experimental program has been conducted to study the flow boiling pressure drop and heat transfer of refrigerants in multi-microchannel evaporators under steady and transient status. For the steady-state tests, three fluids ( R245fa, R236fa and R1233zd(E)) were tested in two multi-microchannel evaporators. The silicon microchannel evaporators were 10 mm long and 10 mm wide, having 67 parallel channels, each 100

\times

100

\mu

^2

, separated by a fin with a thickness of 50

\mu m

. Two types of micro-orifices (25 and 50

\mu

^2

in width) were placed at the entrance of each channel to stabilize the two-phase flow and to obtain good flow distribution. The test section backside temperatures were measured by a self-calibrated infrared (IR) camera. The operating conditions for stable flow boiling tests were: mass fluxes from 1250 to 2750 kg~m

^{-2}

^{-1}

, heat fluxes from 20 to 64 W cm

^{-2}

, inlet subcoolings of 5.5, 10 and 15 K, and nominal outlet saturation temperatures of 31.5, 35 and 40

^{\circ}\mathrm{C}

. The resulting maximum exit vapor quality at the outlet manifold was 0.51. \ The steady-state experimental data were reduced by solving a 3D inverse heat conduction problem to obtain the local heat transfer coefficients on a pixel-by-pixel basis. The required fluid temperature in the subcooled region was calculated from the local energy balance, while that in the saturated flow boiling region came from the general pressure drop model proposed in this manuscript based on the present data base. According to the present data base of fine-resolution local heat transfer coefficients, a new flow pattern based prediction model was developed here starting from the subcooled region all the way through the annular flow regime. This new flow pattern based model predicted the total local heat transfer database (1,941,538 local points) well with a MAE of 14.2% and with 90.1% of the data predicted within

\pm

30%. It successfully tracks the experimental trends without any jumps in predictions when changing flow patterns.\ For the transient tests, an extensive experimental study was conducted to investigate the base temperature response of multi-microchannel evaporators under transient heat loads, including cold startups and periodic step variations in heat flux using two different test sections and two coolants (R236fa and R245fa) for a wide variety of test conditions. In addition, a transient flow boiling test under a heat flux disturbance was performed, and a new method of solving the transient 3D inverse heat conduction problem was proposed to obtain the local transient flow boiling heat transfer coefficients.

EPFL2016

Chargement

Mass Flux Measurement of Two Phase Dense Spray Using a Coupled Impulse Probe and PDPA Technique

Farzad Vakili Farahani

Mass flux and void fraction measurement in a multiphase dense spray is a challenging task. The Phase Doppler Particle Anemometer (PDPA) cannot provide accurate mass flux measurements in a highly turbulent multiphase spray due to the presence of non-spherical and multiple droplets in the probe volume. A combined measurement of momentum data from the impulse probe and velocity data from the PDPA provides a fairly reasonable estimate of mass flux data in the two phase spray envelope. Experimental results show that mass flux at 60Dn (Dn= nozzle diameter of 3.10 mm) downstream of a horizontal nozzle tip is 0.033 kg/s, 0.034 kg/s and 0.0005 kg/s obtained from the theoretical value, impulse probe method and PDPA technique, respectively. This study will help answer some of the fundamental questions about the mass flux distribution in the two phase dense spray, which will aid in the improvement of the multiphase atomization design process in industrial applications.

ILASS-Americas2010

Chargement

An experimental study on flow boiling pressure drop in multi-microchannel evaporators with different refrigerants

Houxue Huang, John Richard Thome

A key parameter in designing two-phase flow systems for the cooling of high heat flux electronics is the pressure drop in microchannel evaporators. As a result, an experimental study was performed to investigate the flow boiling pressure drop of refrigerants in two silicon multi-microchannel evaporators. Three types of refrigerants (R1233zd(E), R245fa and R236fa) were tested under three inlet subcoolings and three nominal outlet saturation temperatures. The test section's backside base temperatures were measured by an infrared (IR) camera. A single-phase flow validation in terms of the inlet and outlet restriction pressure drops and the channel flow friction factor was carefully done before the boiling tests. The operating conditions for stable flow boiling tests were: mass fluxes from 1250 to 2750 kg m(-2) S-1, heat fluxes from 20 to 64 W cm(-2). The resulted maximum vapor quality at the outlet manifold was 0.51. It is found that within the present test conditions the channel pressure drop increased with the inlet subcooling and inlet orifice width but slightly affected by the outlet saturation temperature. In addition, compared to the other two types of refrigerants, R236fa exhibited the lowest channel pressure drop due to its smallest liquid to vapor density ratio and liquid viscosity. Based on the obtained 184 points of stable flow boiling data, a new empirical model suitable for the high mass flux operating conditions was developed. The new pressure drop model yielded the best prediction of the experimental data with a mean absolute error (MAE) of 27.8% and it was thus implemented to predict the local pressure and temperature profiles, allowing a quantitative analysis to obtain highly accurate local heat transfer coefficients. (C) 2016 Elsevier Inc. All rights reserved.

Elsevier Science Inc2017

Chargement

\times

100

\mu

^2

, separated by a fin with a thickness of 50

\mu m

. Two types of micro-orifices (25 and 50

\mu

^2

^{-2}

^{-1}

, heat fluxes from 20 to 64 W cm

^{-2}

, inlet subcoolings of 5.5, 10 and 15 K, and nominal outlet saturation temperatures of 31.5, 35 and 40

^{\circ}\mathrm{C}

\pm

EPFL2016