Publications associées à Nucleate boiling

Extension of GeN-Foam to departure from nucleate boiling prediction and validation against the OECD/NRC PSBT benchmark

Alessandro Scolaro, Carlo Fiorina, Yuhang Niu, Hao Qin

The prediction of departure from nucleate boiling (DNB) has always been a crucial aspect of thermal-hydraulic codes for the analysis of Light Water Reactors. In this paper, GeN-Foam, a multi-physics code developed based on OpenFOAM, has been enhanced to in ...

Elsevier Science Sa2023

Extension of GeN-Foam to modeling of boiling water and validation against the OECD/NRC PSBT benchmark

Carlo Fiorina, Stefan Radman, Ran Zhang, Hao Qin

The OpenFOAM-based GeN-Foam solver has recently been extended to allow simulating water boiling based on a porous-medium approach. This paper describes such extension and preliminarily validates it based on the OECD/NRC PSBT benchmark. Three benchmark exer ...

ELSEVIER SCIENCE SA2023

Flow Boiling of Carbon Dioxide at Different Channel Orientations for the Thermal Management of Future Detector Technologies at the High-Luminosity Large Hadron Collider at CERN

David Schmid

The global warming potential (GWP) of working fluids in thermodynamic cycles and their environmental impact have been gaining considerable attention within the recent years. The global objectives on climate protection are becoming increasingly ambitious, w ...

EPFL2022

Simulation and experimental validation of pulsating heat pipes

John Richard Thome, Jackson Braz Marcinichen, Philippe Aubin, Filippo Cataldo

The one-dimensional transient numerical code of JJ Cooling Innovation has been significantly improved to simulate the thermal/hydraulic performance of pulsating heat pipes (PHPs). Using a mechanistic approach, the liquid slug and vapor plug flows and their ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Fundamental study on microlayer dynamics in nucleate boiling

Lubomír Bures

Dynamics of nucleate boiling are strongly affected by the formation and behaviour of the microlayer, a layer of liquid underneath growing bubbles. As a result of its minute thickness, very high heat fluxes occur within the microlayer and its evaporation co ...

EPFL2021

Flow boiling heat transfer and two-phase flow phenomena of CO2 in macro-and micro-channel evaporators: Fundamentals, applications and engineering design

John Richard Thome

The paper presents a comprehensive review of fundamentals and engineering applications of CO2 flow boiling heat transfer, flow patterns and two-phase pressure drops in macro- and micro-channel evaporators. First, distinctions of macro- and micro-channels a ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Gravity-Independent Oscillate Boiling

Mohamed Farhat, Outi Supponen

Heat transfer in nucleate boiling relies on the detachment and rise of the boiling bubble, in which gravity plays the dominant role. Previous studies showed that in the absence of gravity, the bubble fails to rise, causing the dryout of the heater and sign ...

SPRINGER2019

Fundamental Issues, Technology Development, and Challenges of Boiling Heat Transfer, Critical Heat Flux, and Two-Phase Flow Phenomena with Nanofluids

John Richard Thome

This paper presents a comprehensive and critical review of studies on nucleate pool boiling heat transfer, flow boiling heat transfer, critical heat flux (CHF), and two-phase flow phenomena with nanofluids. First, general analysis of the available studies ...

TAYLOR & FRANCIS INC2019

Numerical Simulations of Pulsating Heat Pipes, Part 1: Modeling

John Richard Thome, Jackson Braz Marcinichen, Philippe Aubin, Filippo Cataldo, Brian Paul D'Entremont, Raffaele Luca Amalfi

The pulsating nature of a closed loop pulsating heat pipe (CLPHP) makes the prediction of its thermal-hydraulic performance extremely challenging. Unfortunately, the design of CLPHPs is still quite an empirical process, requiring testing of many prototypes ...

IEEE2019

Optimum ratio of hydrophobic to hydrophilic areas of biphilic surfaces in thermal fluid systems involving boiling

Luis Guillermo Villanueva Torrijo, Tom Larsen, Ahmad Reza Motezakker

Pool boiling has a high heat removal capability and is considered as one of the most effective cooling methods due to utilization of latent heat of vaporization. Surface wettability plays a key role in boiling heat transfer since it controls the contact li ...

2019