Pierre-Yves GilliéronOriginaire de Mézières (Vaud), né en 1964, Pierre-Yves Gilliéron obtient un diplôme dingénieur en génie rural et géomètre à lEcole polytechnique fédérale de Lausanne (EPFL) en 1988.
De 1988 à 1990, il travaille au laboratoire de photogrammétrie de lEPFL où il participe à un projet de recherche en traitement dimage avec le partenaire industriel LEICA.
De 1991 à 1997, il est engagé par un bureau dingénieurs du Valais où il est actif dans le domaine de la géomatique. Responsable du secteur de la photogrammétrie, il dirige des mandats tant en Suisse quà létranger.
En 1997, il rejoint lEPFL et il est nommé chargé de cours pour le positionnement par satellite et la topographie. Parallèlement, Il collabore à la recherche et au développement au sein du laboratoire de Topométrie (TOPO) dans le domaine des systèmes de navigation appliqués aux transports.
Dès 2018, il occupe le poste d'adjoint à la direction de la section en sciences en ingénierie de l'environnement (SIE) de l'EPFL.
--
Il a été membre du comité de lInstitut Suisse de Navigation (ION-CH), de la commission géodésique suisse (SCNAT/SGK), de commissions d'experts de la VSS, du comité its-ch et de diverses associations professionnelles (IGSO, geosuisse, SSPIT).
Georges MeylanAprès une thèse en astrophysique, en 1985, à l'Observatoire astronomique de l'Université de Genève, Georges Meylan séjourne en tant que postdoc à l'Université de Californie à Berkeley, USA, et au siège de l'Observatoire Européen Austral (ESO) à Munich, Allemagne. Il occupe ensuite des positions d'astronome senior à l'ESO à Munich et au Space Telescope Science Institute (STScI) à Baltimore, USA. Depuis août 2004, il occupe la chaire d'astrophysique de l'EPFL.
Sa recherche porte sur la cosmologie observationnelle, incluant le phénomène de lentilles gravitationnelles, les quasars et leurs galaxies hôtes, la formation et l'évolution des galaxies tout au long de l'évolution de l'Univers, la dynamique stellaire et l'étude des populations stellaires proches et lointaines.
Ambrogio FasoliAmbrogio FASOLI was born on November 10, 1964, in Milano, Italy. After a classical high school diploma (Maturità Classica) and graduation from the University of Milano, with the degree of Dottore in Fisica, he obtained his Phd at the Ecole Polytechnique Fédérale (EPFL) with a thesis on chaos in wave-particle interactions in plasmas, which was awarded the Best EPFL Thesis prize, in 1993. He then moved to the JET Joint Undertaking, the largest worlds fusion device, near Oxford, UK, to investigate Alfvén waves and burning plasma physics. In 1995-1996 he took a sabbatical leave, visiting several Universities and Research Institutes in Europe and in the USA, including three months at General Atomics in San Diego. In 1996-1997, during a second period at JET, he participated in the fusion power worlds record experiments in Deuterium-Tritium plasmas at JET. In 1997 he was nominated Assistant Professor in MIT Physics Department, where he led a basic plasma physics group and the international collaboration between MIT and JET. In 2001 Ambrogio FASOLI was nominated Assistant Professor of Physics at EPFL, Lausanne, Switzerland, and Professeur Boursier of the Swiss National Science Foundation. He became member of CRPP Directorate and took the leadership of CRPP basic plasma physics group and of the TCV tokamak, one of the major fusion experiments worldwide. At European level he was scientific coordinator for JET experiments, spokesperson for multi-machine experiments in the frame of International Tokamak Physics Activities, and Project Leader for a JET Enhancement project. In 2005 he became Associate Professor of Physics with tenure at EPFL, then member of EFDA Science and Technology Advisory Committee, and of the Steering Committee of the Association EURATOM-Swiss Confederation. From 2006 he was also Deputy Director, then from 2007 Executive Director of CRPP and from 2008 Full Professor of Physics at EPFL. For a number of years he was the Chair of the EPFL Physics Strategic Committee and a member of the Directorate of the EPFL School of Sciences. Since the summer of 2014 Professor FASOLI was the sole Director of CRPP. He now represents Switzerland in the EUROfusion General Assembly and Bureau, and in the Governing Board for Fusion for Energy. He is member of the EUROfusion DEMO project Board, of the Scientific Board of the Helmotz Virtual Institute on Advanced Microwave Diagnostics, of the European Delegation for the Cooperation between Euratom and the Government of India in Fusion Energy Research, of the European Consortium for the development of the ITER gyratron (EGYC), and participates to numerous international review panels. He chairs the FuseNet Academic Council, the International Advisory Panel for the Laboratory of Excellence Plas@Par in the Sorbonne Universities, the European Consortium for the construction of the ITER microwave Upper Launcher (ECHUL), and the Promotion Committee of the EPFL Faculty of Basic Sciences. He is one the three European representatives in the International Tokamak Physics Activities Coordinating Committee, advising ITER, and the Editor-in-Chief of the IAEA journal Nuclear Fusion. Since January 2019, Ambrogio Fasoli is the Chair of the General Assembly, i.e. the president of EUROfusion, the European Consortium for Development of Fusion Energy. Professor FASOLI is a Fellow of the American Physical Society and since 2001 a Visiting Professor at MIT Physics Department. He is the Director of the Swiss Plasma Center.
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
