Low frequency oscillator

Low-frequency oscillation (LFO) is an electronic frequency that is usually below 20 Hz and creates a rhythmic pulse or sweep. This is used to modulate musical equipment such as synthesizers to create audio effects such as vibrato, tremolo and phasing. Low-frequency oscillation was introduced with modular synthesizers of the 1960s, such as the Moog synthesizer. Often the LFO effect was accidental, as there were myriad configurations that could be "patched" by the synth operator. LFOs have since appeared in some form on almost every synthesizer. More recently other electronic musical instruments, such as samplers and software synthesizers, have included LFOs to increase their sound alteration capabilities. The primary oscillator circuits of a synthesizer are used to create the audio signals. An LFO is a secondary oscillator that operates at a significantly lower frequency than other oscillators, typically below 20 Hz — that is, below the range of human hearing. The frequencies generated by LFOs are used as control signals which modulate another component's value, changing the output sound without introducing another source. Like a standard oscillator, this usually takes the form of a periodic waveform, such as a sine, sawtooth, triangle or square wave. Also like a standard oscillator, LFOs can incorporate any number of waveform types, including user-defined wavetables, rectified waves and random signals. Using a low-frequency oscillation signal as a means of modulating another signal introduces complexities into the resulting sound, such that a variety of effects can be achieved. The specifics vary greatly depending on the type of modulation, the relative frequencies of the LFO signal and the signal being modulated, et cetera. An LFO can be routed to control, for example, the frequency of the audio oscillator, its phase, stereo panning, filter frequency, or amplification. When routed to control pitch, an LFO creates vibrato. When an LFO modulates amplitude (volume), it creates tremolo.