Concept

Cold working

Publications associées (45)

Atomistic simulation of the elongation response of a < 011 > oriented columnar nano-grain bcc Fe polycrystalline sample

The tensile elongation of an < 011 > oriented columnar nanocrystalline pure iron structure at a temperature of 300 K has been simulated by molecular dynamics (MD). The simulated sample contains 4.3 x 10(6) atoms and has been subject to free elongation alon ...

Springer2016

Comparative study and quantification of cementite decomposition in heavily drawn pearlitic steel wires

Daniele Mari, Aude Marie Agnès Lamontagne

Heavily cold-drawing was performed on a pearlitic steel wire and on an ultra-low carbon (ULC) steel wire in order to highlight and quantify the microstructural changes caused by this type of deformation. Both global techniques (thermoelectric power, electr ...

Elsevier Science Sa2015

Geometrical and material characterisation of quenched and self-tempered steel reinforcement bars

Eugen Brühwiler, Alain Nussbaumer, Marina Rocha Pinto Portela Nunes

Quenched and self-tempered (QST) steel reinforcement bars (rebars) are manufactured by Thermex or Tempcore processes. Characterization studies of QST rebars are mostly limited to reveal the hardened outer layer and some improved mechanical properties compa ...

Asce-Amer Soc Civil Engineers2015

Microstructural influence on the scatter in the fatigue life of steel reinforcement bars

Alain Nussbaumer, Marina Rocha Pinto Portela Nunes

Fatigue damage accumulation and failure of steel reinforcement bars (rebars) is a stochastic process. Scatter can be influenced by the sensitivity of the short crack growth to the microstructural features, especially near the fatigue limit. This work inves ...

Elsevier2015

Effect of heterogeneously distributed pre-existing dispersoids on the recrystallization behavior of a cold-rolled Al–Mn–Fe–Si alloy

Ke Huang

It is well known that strong concurrent precipitation, mainly located along grain/subgrain boundaries, results in a coarse and elongated grain structure, and unusual sharp P {011} and/or M {113} texture components during annealing of supersatur ...

Elsevier2015

The Influence of Microchemistry and Processing Conditions on the Softening Behavior of Cold-Rolled Al-Mn-Fe-Si Alloys

Ke Huang

Motivated by an increased focus on recycling of aluminium alloys, for which elements like Mn, Fe and Si tend to increase, a comprehensive investigation of the softening behavior during annealing after cold rolling of Al-Mn-Fe-Si alloys has been carried out ...

2015

Magnesium interatomic potential for simulating plasticity and fracture phenomena

William Curtin, Michael Frederick Francis

Magnesium has multiple dislocation and twinning systems with starkly different properties, which make its plastic deformation strongly anisotropic and highly complex. Existing empirical interatomic potentials fail to capture the full scope of these propert ...

Institute of Physics2015

Quantitative analysis of deformation in hollow cylinder tests on anisotropic clay formations

Vincent Labiouse, Gioacchino Viggiani, Shuang You

A series of triaxial laboratory experiments are performed on thick-walled hollow cylindrical samples of boom clay. The aim of this testing program is to better understand the anisotropic deformation during the excavation. The testing conditions are similar ...

2015

Cold-Bent Glass Structures

Benjamin Moroni

In contemporary architecture there is an increasing demand for transparency and curved shape. The Cold-Bending process is an effective and relatively inexpensive way of creating double curved surface glass. This thesis focuses on the shaping of a plate wit ...

2015

Fatigue behaviour prediction of steel reinforcement bars using an adapted Navarro and De Los Rios model

Alain Nussbaumer, Marina Rocha Pinto Portela Nunes

Fatigue cracks tend to initiate on the rebar surface and therefore, the surface conditions may control their fatigue behaviour. This study investigates the influence of surface microstructure and roughness dispersion on the scatter and fatigue life of hot ...

Elsevier Sci Ltd2015

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Connectez-vous pour utiliser Chat avec Graph Search