Publications associées à Fonte (métallurgie)

Photo-Fenton inactivation of MS2 bacteriophage at alkaline pH by Fe salts or nm to μm-sized oxides, and the Janus-faced effects of natural organic matter in surface waters

César Pulgarin, Stefanos Giannakis, Giulio Farinelli, Ogadimma Cassandra Oji-Okoro

In this study, MS2 bacteriophage was inactivated by homogeneous and heterogeneous photo-Fenton processes in an alkaline matrix (pH 8) using low concentrations of H2O2 and iron forms (1 mg/L), including Fe(II), Fe(III), and Fe (hydr)oxides. As a reference, ...

Elsevier2024

Phase Transformation-Induced Interfacial Debonding of Silica Inclusions in Iron

Andreas Mortensen, David Hernandez Escobar, Julie Nathalie S Gheysen, Alejandra Inés Slagter

We document that in unstressed, undeformed, samples of pure iron containing silica inclusions precipitated by melt deoxidation, the iron matrix and a small fraction of the silica inclusions are locally separated at room temperature by a void. Thermal cycli ...

Springer2023

Room-temperature strength of the interfacial bond between silica inclusions and iron

Andreas Mortensen, Alejandra Inés Slagter, David Hernandez Escobar, Sergio Perosanz Amarillo

The strength of the interface between iron (Fe) and individual spherical silica (SiO2) inclusions of 5 +/- 1 mu m diameter is measured by means of in-situ micro-cantilever bending tests conducted under displacement control within a scanning electron micros ...

Pergamon-Elsevier Science Ltd2023

Enhanced Leaching of Zinc Ferrite by the Formation of a Solid Solution With Magnetite in Hydrochloric Acid Solution

The high zinc and iron contents of electric arc furnace (EAF) dust in the forms of zinc ferrite (ZnFe2O4) and magnetite (Fe3O4) make it a valuable secondary source of these metals. ZnFe2O4 and Fe3O4 are known to form a solid solution at all compositions, a ...

SPRINGER2023

Micromechanics of oxide inclusions in ferrous alloys

Alejandra Inés Slagter

Oxide inclusions are inevitably present in steel as a direct consequence of the steelmaking process; as a result, a cubic centimetre of modern steel will generally contain about a million of these hard and brittle micrometre-sized ceramic particles. Inclus ...

EPFL2023

Design of New Low-Carbon Floor Systems by Reusing Cut Cast-in-Place Concrete Pieces

Corentin Jean Dominique Fivet, Numa Joy Bertola, Célia Marine Küpfer

As floors typically account for the largest share of a building embodied carbon footprint, new strategies to build low-carbon floors must be developed and implemented. Among these strategies, the reuse of existing components is a promising circular approac ...

Novus Press2023

Bacterial inactivation in sunlit surface waters is dominated by reactive species that emanate from the synergy between light, iron, and natural organic matter

César Pulgarin, Stefanos Giannakis, Jun Ma, Da Wang, Shuang Song

In this study, the synergistic and antagonistic effects of Fe species and coexisting natural organic matter (NOM) on the efficacy of solar light disinfection of water are investigated. Different initial iron species (Fe2+/Fe3+) and naturalorganic matter ty ...

Elsevier2023

Effect of different ions on dissolution rates of silica and feldspars at high pH

Karen Scrivener, Barbara Lothenbach, Mahsa Bagheri, Mahdieh Shakoorioskooie

The dissolution kinetics of silica-containing minerals in aggregates influences strongly the process of ASR in concrete. In this paper, the effect of different ions on the dissolution rates of SiO2 (amorphous and quartz) and feldspars at high pH values was ...

Pergamon-Elsevier Science Ltd2022

Oxidation of pyrite (FeS2) and troilite (FeS) impurities in kaolinitic clays after calcination

Karen Scrivener, Franco Alberto Zunino Sommariva

Valorisation of locally available clays for producing blended cements is crucial for a widespread adoption of sustainable binders incorporating these materials. In some places, clays can be intermixed with small amounts of iron sulfides, which could eventu ...

SPRINGER2022

Processing and micro-mechanical characterization of multi-component transition MC carbides in iron

Andreas Mortensen, Goran Zagar, Léa Deillon, Marta Fornabaio, Lionel Michelet

We prepare multi-component transition monocarbides of chosen composition by arc-melting together a pre-alloy of the transition metals and cast iron. Based on the elements Ti, Ta, V, Nb and W, 51 different binary, ternary and quaternary compositions are pro ...

2021