Concept

Machine thermique

Publications associées (189)

Novel district heating and cooling energy network using CO2 as a heat and mass transfer fluid

François Maréchal, Daniel Favrat, Luc Girardin, Samuel Henchoz

Compact district energy networks in a temperature range of 10 to 16°C have a great potential for energy savings by providing a heat source for decentralized heating heat pumps, a cold source for air-conditioning and a heat sink for refrigeration or cogener ...

2017

Heat Pump driven by a Small-Scale Oil-Free Turbocompressor – System Design and Simulation

Jürg Alexander Schiffmann, Adeel Javed

Small-scale oil-free turbocompressors driven by high-speed electric motors and supported on refrigerant vapor bearings represent a promising technology to increase the performance of domestic heat pumps. Gas bearings enable high rotational speeds with low ...

2017

ORC Driven Heat Pump Running on Gas Bearings for Domestic Applications: Proof of Concept and Thermo-Economic Improvement Potential

Jürg Alexander Schiffmann, Violette Mounier

ORC driven Heat Pumps (HP-ORC) offer a promising technology of thermally driven heat pumps (TDHPs) for domestic applications. Recently, a 40 kW HP-ORC unit based on gas supported turbomachinery has been investigated in which the ORC radial turbine drives t ...

2017

Turbocompressors for Domestic Heat Pumps – A Critical Review

Jürg Alexander Schiffmann, Jean-Baptiste Carré

Small-scale, oil-free radial compressors on gas lubricated bearings represent a promising alternative to state-of-the-art compressor technology for driving domestic sized heat pumps. The inherent characteristics of turbocompressors manage to fit the heat p ...

2017

Flow Boiling Heat Transfer and Pressure Drops of R1234ze(E) in a Silicon Micro-pin Fin Evaporator

John Richard Thome, Mirco Magnini, Chiara Falsetti

The development of newer and more efficient cooling techniques to sustain the increasing power density of high-performance computing systems is becoming one of the major challenges in the development of microelectronics. In this framework, two-phase coolin ...

Asme2017

Testing and modelling of a novel oil-free co-rotating scroll machine with water injection

Jürg Alexander Schiffmann, Luis Carlos Mendoza Toledo

Efficient compressed air energy storage requires reversible isothermal compression and expansion devices. The isothermal compression and expansion processes can either be approached by several stages with intercooling or by the more convenient injection of ...

Elsevier2017

General Superstructure Synthesis and Bi-level Solution Strategy for Industrial Heat Pumping

François Maréchal, Ivan Daniel Kantor, Maziar Kermani, Anna Sophia Wallerand

Industrial waste heat is abundant and represents significant energy inefficiency for many processes. With increasing emphasis on improving industrial energy efficiency, heat pump systems (including refrigeration) offer a solution by valorizing low-temperat ...

Elsevier2017

Thermo-economic optimization of an ORC driven heat pump based on small scale turbomachinery and comparison with absorption heat pumps

Jürg Alexander Schiffmann, Luis Carlos Mendoza Toledo, Violette Mounier

The current paper presents the thermo-economic optimization and comparison, through a multi-objective algorithm, between HP-ORC and the competing single effect absorption heat pump (SEAHP), with the aim to find the best trade-off between investment cost an ...

Elsevier2017

Penciling a triboelectric nanogenerator on paper for autonomous power MEMS applications

Jürgen Brugger, Xiao Sheng Zhang

Triboelectric nanogenerator (TENG) has proven to be a robust power source to efficiently convert ambient mechanical energy into electricity. It experienced substantial growth in the past years owing to its appealing features that make it superior than othe ...

Elsevier Science Bv2017

Towards optimal design of solar assisted industrial processes: Case study of a dairy

François Maréchal, Anna Sophia Wallerand, Régis Voillat

Pinch analysis is a valuable tool for industrial process integration and optimization. Based on heat cascading and Mixed Integer Linear Programming (MILP) the optimal utility system can be found, includ- ing traditional heat sources (burners, boilers) and ...

University of Ljubljana2016

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Connectez-vous pour utiliser Chat avec Graph Search