Michel RappazAprès un doctorat en physique du solide (1978) de l’Ecole Polytechnique Fédérale de Lausanne (EPFL), un post-doc à Oak Ridge National Laboratory, Michel Rappaz rejoint l’Institut des matériaux de l’EPFL en 1981. Après un passage de deux ans dans un bureau d’ingénieurs, il revient à l’EPFL en 1984 où il est nommé Professeur titulaire en 1990, puis Professeur ordinaire en 2003. Après sa retraite de l’EPFL en 2015, il est actuellement Professeur émérite et consultant indépendant auprès de divers centres de recherche et industries.
Ses principaux centres d’intérêt sont les transformations de phase et la solidification, en particulier le couplage des aspects macroscopiques de transferts de chaleur et de masse à l’échelle des procédés avec les aspects microscopiques de germination-croissance des microstructures et des défauts. Parmi ses diverses réalisations, on peut mentionner le développement d’Automates Cellulaires couplés avec la méthode d’Eléments Finis (modèle CAFE) pour la prédiction des structures de grains en solidification, le développement de modèles granulaires pour la fissuration à chaud, l’application de la méthode de champ de phase pour la compréhension de diverses microstructures, la découverte de la germination assistée dans certains alliages par des phases quasicrystallines, ainsi que de nombreuses études touchant aussi bien les aspects fondamentaux de formation des structures que des aspects plus appliqués des procédés.
Certains modèles développés dans son laboratoire ont été commercialisés par une spin-off fondée en 1991 (Calcom SA), faisant partie actuellement du groupe français ESI. Michel Rappaz a initié en 1992 un cours annuel de formation continue en solidification, suivi à ce jour par plus de 900 participants venant d’une quarantaine de pays. Il collabore actuellement avec une autre spin-off du laboratoire fondée en 2014, Novamet SàrL.
Michel Rappaz a reçu de nombreux prix et distinctions, en particulier le prix Mathewson de co-auteur (1994) et auteur (1997) de l’American Mineral, Metals and Materials Society (TMS), le prix de la fondation Koerber avec les Profs Y. Bréchet et M. Asbby (1996), la médaille Sainte-Claire Deville (1996) et la Grande Médaille (2011) de la Société Française des Matériaux (SF2M), le prix Bruce Chalmers de la TMS (2002), le prix Mc Donald Memorial Lecture du Canada (2005), la médaille d’or de la Société Européenne des Matériaux (FEMS, 2013) et le prix Brimacombe de la TMS (2015). Il fait partie des “Highly-Cited Authors” de ISI, il est fellow des sociétés ASM, IOP et TMS, et a écrit plus de 200 publications et deux livres.
René SalathéRené Paul Salathé is Professor em. at EPFL since 2009. He is currently a technology consultant for several companies and he serves as an expert member of the Life Science team at the Swiss Innovation Agency (KTI/CTI) in Bern, on the scientific advisory board of the Fraunhofer-Institut für Lasertechnik ILT in Aachen, and he participates on expert panels for the Deutsche Forschungsgemeinschaft. He is a member of the Swiss Society for Optics and Microscopy, the European Optical Society, the Optical Society of America, a senior member of the IEEE, and a life time member of the Swiss Physical Society.
René Paul Salathé received the MS, PhD, and Habilitation (Privatdozent) degrees at the University of Bern in 1970, 1974, and 1979, respectively. Prior to his appointment at EPFL in 1989, he was directing the division "Material Testing and Technology" at the research and development center of the Swiss PTT. He has been active in the fields of semiconductor lasers, fibers, integrated optics, laser processing, and biomedical optics. The results of his research activities have been published more than 250 scientific contributions and 37 PhD theses at EPFL. Several start-up companies have been founded based on patents elaborated in his laboratory and/or by his PhD students. His actual research interests are in the areas of laser tweezers in micro-fluidics for biochemical applications and in optical fiber sensor applications.
Dimitrios LignosProf. Lignos joined the École Polytechnique Féderale de Lausanne (EPFL) in 2016 from McGill University in Canada where he was a tenured Associate Professor and a William Dawson Scholar for Infrastructure Resilience. He holds a diploma (National Technical University of Athens, NTUA, 2003), M.S. (Stanford University, 2004) and Ph.D. (Stanford University, 2008). In addition, he was a post-doctoral scientist at Stanford University (2009) and in Kyoto University (2010). Prof. Lignos teaches graduate and undergraduate courses in seismic design, nonlinear behaviour of steel and composite structures as well as supplemental damping systems, Structural Stability, Nonlinear Analysis and Performance-based Earthquake Engineering. His awards for teaching, research and service in Civil Engineering include the 2011 Outstanding Teaching Award (Faculty of Engineering, McGill University), as well as the Outstanding reviewer (2012, 2013) award from ASCE, the 2013 State-of-the-Art in Civil Engineering Award by ASCE and the 2014 Christophe Pierre Award for Research Excellence - Early Career. Just recently, he received the 2019 Walter L. Huber Civil Engineering Research Prize from ASCE for significant contributions in developing state of the art methods to simulate extreme limit states in steel structures.Prof. Lignos is a member of ASCE and the Earthquake Engineering Research Institute. He acts as an Associate Editor for Metal Structures and Seismic Effects of the ASCE Journal of Structural Engineering. He joined the Editorial Board of Earthquake Spectra and Earthquake Engineering and Structural Dynamics International journals. He serves as an acting member of the CEN/TC 250/SC 8/WG 2 and has been selected as a member of the Project Team (PT2) for the Eurocode 8-Part 1 Current Revisions for Steel and Composite Structures. He is also a member of the Canadian Standards Association (CSA) S16 technical committee for Steel Structures. Prof. Lignos is involved as a NEHRP consultant in numerous research-to-practice projects related to the behaviour and nonlinear modelling and analysis of structures applicable to the engineering practice through the Applied Technology Council (ATC). Detailed Curriculum Vitae (last update September 2018)
Jean-Marie Drezet1992-1996: travail de thèse au Laboratoire de Métallurgie Physique sous la direction du Prof. Michel Rappaz, http://library.epfl.ch/theses/?display=detail&nr=1509 1997-2000: projet EMPACT (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: projet VIRCAST (European Virtual Casting) 2005-2006: projet Etude du sciage des barres à laminer (Alcan Fonds) 2005-2006: projet WelAIR (Welding of Airframes, EADS) 2005-2008: soudage faisceau d'électrons des Cu-Cr-Zr (CEA, France) 2006-2008: soudage laser des Al-Li (EADS, France) 2008-2011: co-direction avec le Prof. A. Nussbaumer de la thèse de C. Acevedo sur l'influence des contraintes residuelles sur le desgin en fatigue des joints tubulaires soudés, http://library.epfl.ch/theses/?nr=5056 2007-2011: co-direction avec le Prof. J.-F. Molinari de la thèse de K. Shahim sur la dilatation ventriculaire dans l'hydrocéphalie à pression normale (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-direction avec le Prof. M. Rappaz de la thèse de M. Sistaninia sur la simulation de la fissuration par modèles granulaires (Projet CCMX-MERU) 2010-2014: direction avec le Prof. M. Rappaz de la thèse de N. Chobaut sur la simulation des contraintes lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU) 2011-2015: direction avec le Prof. H. Van Swygenhoven-Moens de la thèse de P. Schloth sur l'étude de la précipitation lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU)