Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
As previously demonstrated by Thurber and Tycko, the peak position of Br-79 in potassium bromide (KBr) allows one to determine the temperature of a spinning sample. We propose to adapt the original design by using a compact KBr tablet placed at the bottom ...
Reinforced glass beams. At the faculty of Architecture at Delft University of Technology, a research group focuses on the development of transparent structures and components with safe failure behaviour. One of the concepts currently under investigation is ...
This paper presents a new fabrication method to manufacture alkali reference cells having dimensions larger than standard micromachined cells and smaller than glass-blown ones. This technology fills a gap in cell sizes and already available technologies. ...
Ieee Service Center, 445 Hoes Lane, Po Box 1331, Piscataway, Nj 08855-1331 Usa2011
Commercial glass frits (lead borosilicate glasses) were employed as the sintering aids to reduce the sintering temperatures of BST ceramics. The effects of the glass content and the sintering temperature on the microstructures, dielectric properties and tu ...
In modern buildings, glass is increasingly used as a load-carrying material in structural components, such as glass beams. For glass beams especially the edge strength of glass is important. However, the strength of glass is not a material constant but dep ...
Micro-molding can be used for the cost-effective fabrication of elements such as active or passive components in MEMS devices, hydrophobic surfaces, cell-growth scaffolds or optical components such micro-lens arrays and gratings. This method is also partic ...
In a recent article (Sekulic and Curnier (2007) [1]), an original axisymmetric epoxy-stamp on glass-disc specimen, which exhibits stable debonding, was presented for identifying the adhesive properties between epoxy and glass, namely interface debonding en ...
To generate high-level redundancy for structural glass beams, a novel concept of laminating a metal reinforcement to a structural glass beam has been developed at Delft University of Technology (TU Delft). This concept makes use of the relatively stiff pol ...
In the last two decades architectural glass has made an enormous leap from a secondary material to a material that combines structural and cladding roles. The structural role is a new and problematic one. In contrast to most other engineering materials the ...
We investigated the coating of glass-supported gold nanostructures with polyelectrolyte multilayers. To achieve selective coating of either the metal or the glass, thiol and silane monolayers with different functionalities were used. Self-assembled monolay ...
