Concept

Four à réverbère

Publications associées (9)

CO2 Capture and Management Strategies for Decarbonizing Secondary Aluminium Production

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos, Réginald Germanier

The production of aluminium largely depends on the use of fossil fuels, resulting in the emission of significant amounts of greenhouse gases. As the aluminium industry is working towards decreasing its environmental burdens, the elimination of direct emiss ...

2024

Improved Waste Heat Management and Energy Integration in an Aluminum Annealing Continuous Furnace Using a Machine Learning Approach

François Maréchal, Daniel Alexander Florez Orrego, Réginald Germanier, Manuele Gatti, Mohammad Andayesh

Annealing furnaces are critical for achieving the desired material properties in the production of high-quality aluminum products. In addition, energy efficiency has become more and more important in industrial processes due to increasing decarbonization r ...

2023

Preparation for commissioning of materials detritiation facility at Culham Science Centre

Olivier Sauter, Ambrogio Fasoli, Basil Duval, Stefano Coda, Jonathan Graves, Yves Martin, Duccio Testa, Patrick Blanchard, Alessandro Pau, Cristian Sommariva, Henri Weisen, Richard Pitts, Yann Camenen, Jan Horacek, Javier García Hernández, Marco Wischmeier, Nicola Vianello, Mikhail Maslov, Federico Nespoli, Yao Zhou, David Pfefferlé, Davide Galassi, Antonio José Pereira de Figueiredo, Jonathan Marc Philippe Faustin, Liang Yao, Dalziel Joseph Wilson, Hamish William Patten, Samuel Lanthaler, Bernhard Sieglin, Otto Asunta

The Materials Detritiation Facility has been designed to thermally treat solid non-combustible radioactive waste produced during operations of the Joint European Torus (JET) that is classified as Intermediate Level Waste in the UK due to its tritium invent ...

2018

The microstructure, mechanical properties and corrosion resistance of 316 L stainless steel fabricated using laser engineered net shaping

The mechanical properties and corrosion resistance of 316 L stainless steel fabricated using the Laser Engineered Net Shaping (LENS) technique have been studied. The crack-free, full density samples made using SS316L alloy powder and the LENS technique are ...

Elsevier Science Sa2016

The Effect of Mg on Slag Reactivity in Blended Cements

Karen Scrivener, Ruben Anton Snellings

Blast-furnace slags are widely used as supplementary cementitious materials in blended cements because of their relatively high reactivity. This study describes the effect of substituting Ca by Mg on the reactivity of synthetic glass with similar compositi ...

Springer2014

Solution-Controlled Dissolution of Supplementary Cementitious Material Glasses at pH 13: The Effect of Solution Composition on Glass Dissolution Rates

Ruben Anton Snellings

Supplementary cementitious materials (SCMs) are widely used to partially replace portland clinker in blended cements. Reducing clinker contents further without compromising the development of early strength necessitates a better assessment and enhancement ...

Wiley-Blackwell2013

An Environomic Approach for the Modeling and Optimization of a District Heating Network Based on Centralized and Decentralized Heat Pumps, Cogeneration and/or Gas Furnace (Part I: Methodology)

Daniel Favrat, Vinicio Curti

Although heat pump based district heating is often an obvious solution from an energy standpoint, adapting the delivery temperature to the most exigent users is detrimental to overall system performance. This pitfall can be avoided with a centralized plant ...

2000

An Environomic Approach for the Modeling and Optimization of a District Heating Network Based on Centralized and Decentralized Heat Pumps, Cogeneration and/or Gas Furnace (Part II: Application)

Daniel Favrat, Vinicio Curti

2000

Influence of nitrogen profile an electrical characteristics of furnace- or rapid thermally nitrided silicon dioxide films

Giorgio Margaritondo, Didier Bouvet

Thin silicon dioxide films nitrided in N2O by rapid thermal processing (RTP) or in a classical furnace were investigated by x-ray photoelectron spectroscopy, secondary ion mass spectroscopy, and electrical measurements on metal-oxide-semiconductor capacito ...

1996

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Connectez-vous pour utiliser Chat avec Graph Search