Jean-François MolinariProfessor J.F. Molinari is the director of the Computational Solid Mechanics Laboratory (http://lsms.epfl.ch) at EPFL, Switzerland. He holds an appointment in the Civil Engineering institute, which he directed from 2013 to 2017, and a joint appointment in the Materials Science institute. He started his tenure at EPFL in 2007, and was promoted to Full Professor in 2012. He is currently an elected member of the Research Council of the Swiss National Science Foundation in Division 2 (Mathematics, Natural and Engineering Sciences), and co editor in chief of the journal Mechanics of Materials. J.F. Molinari graduated from Caltech, USA, in 2001, with a M.S. and Ph.D. in Aeronautics. He held professorships in several countries besides Switzerland, including the United States with a position in Mechanical Engineering at the Johns Hopkins University (2000-2006), and France at Ecole Normale Supérieure Cachan in Mechanics (2005-2007), as well as a Teaching Associate position at the Ecole Polytechnique de Paris (2006-2009). The work conducted by Prof. Molinari and his collaborators takes place at the frontier between traditional disciplines and covers several length scales from atomistic to macroscopic scales. Over the years, Professor Molinari and his group have been developing novel multiscale approaches for a seamless coupling across scales. The activities of the laboratory span the domains of damage mechanics of materials and structures, nano- and microstructural mechanical properties, and tribology. Stefano MischlerStefano Mischler obtained the diploma in materials science in 1983 at the Swiss Federal Institute of Technology ETHZ in Zurich. He accomplished his PhD thesis in the field of surface analysis and corrosion at the Materials department of the Swiss Federal Institute of Technology EPFL in Lausanne in 1988. In the years 1989-1990 he held a postdoctoral position at the United Kingdom Atomic Energy Establishment in Harwell (Oxfordshire) where he developed novel quantification procedures for Auger Electron Spectroscopy and high lateral resolution surface analytical methods for fiber reinforced ceramics. In 1991 he joined the newly created Tribology group at the Laboratory for Metallurgical Chemistry of the EPFL where he developed research activities in the field of wear-corrosion interactions (tribocorrosion) and of tribological coatings. He is currently head of the tribology group and is developing a reserach and training activity devoted to modern aspects of tribology and surface science and technology, including surface chemical effects in tribology, biotribology and biocorrosion, tribology in microfabrication processes and wear protection methods. In 2006 he spent a sabbatical leave of 3 months at the Tokyo Medical and Dental University, Institute of Biomaterials.
Philippe RenaudPhilippe Renaud is Professor at the Microsystem Laboratory (LMIS4) at EPFL. He is also the scientific director of the EPFL Center of MicroNanoTechnology (CMI). His main research area is related to micronano technologies in biomedical applications (BioMEMS) with emphasis on cell-chips, nanofluidics and bioelectronics. Ph. Renaud is invloved in many scientifics papers in his research area. He received his diploma in physics from the University of Neuchâtel (1983) and his Ph.D. degree from the University of Lausanne (1988). He was postdoctoral fellow at University of California, Berkeley (1988-89) and then at the IBM Zürich Research Laboratory in Switzerland (1990-91). In 1992, he joined the Sensors and Actuators group of the Swiss Center for Electronics and Microtechnology (CSEM) at Neuchâtel, Switzerland. He was appointed assistant professor at EPFL in 1994 and full professor in 1997. In summer 1996, he was visiting professor at the Tohoku University, Japan. Ph. Renaud is active in several scientific committee (scientific journals, international conferences, scientific advisory boards of companies, PhD thesis committee). He is also co-founder of the Nanotech-Montreux conference. Ph. Renaud is committed to valorization of basic research through his involvement in several high-tech start-up companies.
Roland SiegwartOriginaire d'Altdorf (UR) et d'Oberkirch (LU), Roland Siegwart est né en 1959 à Lausanne. Après une enfance à Schwyz, il a étudié à l'EPFZ et a obtenu son diplôme en génie mécanique en 1983. Il a travaillé ensuite comme assistant de recherche à l'EPFZ. En 1989, il a obtenu son doctorat, sa thèse traitant de l'application des paliers magnétiques sur les machines d'usinage de grande vitesse.
De 1989 à 1990, il a effectué des recherches à l'Université de Stanford en Californie (USA) et a participé à des projets en microrobotique. De retour en Suisse, il a rejoint l'Institut de robotique à l'EPFZ. Comme directeur remplaçant de l'Institut de Robotique, il a organisé les activités dans la micro- et nanorobotique. Il a mis notamment au pointuncourensystèmesélectroméca-niques appliqués.
Depuis 1990, R. Siegwart a été engagé en parallèle comme vice président de MECOS Traxler AG, une entreprise spin-off' de l'EPFZ. Il a dirigé de nombreux projets industriels dans le domaine des paliers magnétiques. ProfesseurauDépartementdemicrote-chnique de l'EPFL depuis 1996, R. Siegwart est responsable de la recherche en systèmes microtechniques autonomes. Le champ principal de ses activités porte sur les robots et les microrobots mobiles ainsi que les microsystèmes dynamiques et de très hautes performances.
Anton SchleissProf. Dr. Anton J. Schleiss graduated in Civil Engineering from the Swiss Federal Institute of Technology (ETH) in Zurich, Switzerland, in 1978. After joining the Laboratory of Hydraulic, Hydrology and Glaciology at ETH as a research associate and senior assistant, he obtained a Doctorate of Technical Sciences on the topic of pressure tunnel design in 1986. After that he worked for 11 years for Electrowatt Engineering Ltd. (now Pöyry) in Zurich and was involved in the design of many hydropower projects around the world as an expert on hydraulic engineering and underground waterways. Until 1996 he was Head of the Hydraulic Structures Section in the Hydropower Department at Electrowatt. In 1997, he was nominated full professor and became Director of the Laboratory of Hydraulic Constructions (LCH) in the Civil Engineering Department of the Swiss Federal Institute of Technology Lausanne (EPFL). The LCH activities comprise education, research and services in the field of both fundamental and applied hydraulics and design of hydraulic structures and schemes. The research focuses on the interaction between water, sediment-rock, air and hydraulic structures as well as associated environmental issues and involves both numerical and physical modeling of water infrastructures. In May 2018, he became Honorary Professor at EPFL. More than 50 PhD and Postdoc research projects have been carried out under his guidance. From 1999 to 2009 he was Director of the Master of Advanced Studies (MAS) in Water Resources Management and Hydraulic Engineering held in Lausanne in collaboration with ETH Zurich and the universities of Innsbruck (Austria), Munich (Germany), Grenoble (France) and Liège (Belgium). From 2006 to 2012 he was the Head of the Civil Engineering program of EPFL and chairman of the Swiss Committee on Dams (SwissCOLD). In 2006, he obtained the ASCE Karl Emil Hilgard Hydraulic Price as well as the J. C. Stevens Award. He was listed in 2011 among the 20 international personalities that “have made the biggest difference to the sector Water Power & Dam Construction over the last 10 years”. Between 2014 and 2017 he was Council member of International Association for Hydro-Environment Engineering and Research (IAHR) and he was chair of the Europe Regional Division of IAHR until 2016. For his outstanding contributions to advance the art and science of hydraulic structures engineering he obtained in 2015 the ASCE-EWRI Hydraulic Structures Medal. The French Hydro Society (SHF) awarded him with the Grand Prix SHF 2018. After having served as vice-president between 2012 and 2015 he was president of the International Commission on Large Dams (ICOLD) from 2015 to 2018. On behalf of ICOLD he his the coordinator of the EU Horizon 2020 project "Hydropower Europe". With more than 40 years of experience he is regularly involved as a consultant and expert in large water infrastructures projects including hydropower and dams all over the world. Awards (besides those mentioned above): ASCE-Journal of Hydraulic Engineering Outstanding Reviewer Recognition 2013 ASCE-EWRI-Journal of Hydraulic Engineering 2014 Best Technical Note
André-Gilles DumontAndré-Gilles Dumont est né en 1951 à la Brévine (NE). Il obtient en 1976 le diplôme d'ingénieur civil de l'EPFL.
Jusqu'en 1979, il est collaborateur d'un bureau d'ingénieurs et dirige la construction de divers bâtiments. Il entre ensuite au Laboratoire des voies de circulation (LAVOC) où il va développer une méthodologie d'essais en vraie grandeur des superstructures routières. Cette activité sera poursuivie au niveau international au sein de deux groupes d'experts scientifiques de l'OCDE.
Parallèlement au développement du LAVOC et à l'exécution de nombreux mandats pour des tiers, il est l'auteur de plusieurs recherches dans le domaine des matériaux granulaires et des bitumineux modifiés par des polymères.
En Suisse, il assume dès 1985 la présidence de la commission Technologie des matériaux de l'Union des professionnels suisses de la route puis, dès 1990, celle de la commission de coordination Exécution et entretien.
Depuis 1991, il est professeur et dirige le LAVOC. Il enseigne aux étudiants du génie civil et du génie rural, d'une part le tracé des voies de circulation et, d'autre part la construction et l'entretien des superstructures routières. Il mène également des recherches dans le domaine des propriétés des matériaux hydrocarbonés et de la modélisation des chaussées, comme dans celui de l'utilisation de la CAO pour l'élaboration des projets routiers et la prise en compte des facteurs environnementaux.
