Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
A computational analysis of the longitudinal deformation of continuous fibre reinforced metals is presented. Elastic and elastic-plastic matrix behaviour are considered. Analytical approaches are confronted with finite element analyses (FEA) for varying fi ...
For centuries, the use of glass in buildings was essentially restricted to functions such as windows and glazing. Over the last decades, continuous improvements in production and refining technologies have enabled glass elements to carry more substantial s ...
The effect of sizing on bending rigidity in fibre bundles was investigated. Particular attention was paid to the effect of film formers and anti-static agents on the behaviour of glass fibre bundles under forced packing conditions. The bending rigidity of ...
Abstract This study describes the development and validation of a Radiance model for a translucent panel. Using goniophotometer data combined with integrating sphere measurements, optical properties of the panel were derived and converted into a Radiance m ...
During reheating and post-processing of thermoplastic-based composites, deconsolidation is often observed: the volume fraction fibre decreases and the void content increases. In this article, the phenomena leading to deconsolidation are investigated, with ...
A study of the microstructure developing at the surface of glass fibers in a poly(vinyl acetate) (PVAc)/polyester blend is presented. Three different experimental methods are used: a technique based on the Wilhelmy method to measure the wettability of the ...
The influence of the initial configuration of glass mat and polypropylene on the deconsolidation during post-processing of the resulting composite is investigated. Deconsolidation experiments of a classic type of glass mat reinforced thermoplastic (GMT) pr ...
In the impregnation process, when pressure is applied, the dry fiber preform is first compressed and then unloads as the matrix flows within the pores. It has been shown earlier that for glass mat-reinforced thermoplastic (GMT) materials, the time to provi ...
The correlation between sizing formulation, bundle mechanical characteristics, and bundle-matrix static and dynamic interactions are investigated. Two glass-fiber sizing formulations are considered, one containing polyvinyl acetate (PVAc) and the other pol ...
The evolution of morphology of reactive thermoplastic/unsaturated polyester blends at the surface of glass fibers is investigated during curing. The study focuses on two different types of thermoplastics, incompatible and compatible respectively with the p ...
