Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The effect of sizing on bending rigidity in fibre bundles was investigated. Particular attention was paid to the effect of film formers and anti-static agents on the behaviour of glass fibre bundles under forced packing conditions. The bending rigidity of ...
In the impregnation process, when pressure is applied, the dry fiber preform is first compressed and then unloads as the matrix flows within the pores. It has been shown earlier that for glass mat-reinforced thermoplastic (GMT) materials, the time to provi ...
The influence of the initial configuration of glass mat and polypropylene on the deconsolidation during post-processing of the resulting composite is investigated. Deconsolidation experiments of a classic type of glass mat reinforced thermoplastic (GMT) pr ...
A study of the microstructure developing at the surface of glass fibers in a poly(vinyl acetate) (PVAc)/polyester blend is presented. Three different experimental methods are used: a technique based on the Wilhelmy method to measure the wettability of the ...
The correlation between sizing formulation, bundle mechanical characteristics, and bundle-matrix static and dynamic interactions are investigated. Two glass-fiber sizing formulations are considered, one containing polyvinyl acetate (PVAc) and the other pol ...
For centuries, the use of glass in buildings was essentially restricted to functions such as windows and glazing. Over the last decades, continuous improvements in production and refining technologies have enabled glass elements to carry more substantial s ...
During reheating and post-processing of thermoplastic-based composites, deconsolidation is often observed: the volume fraction fibre decreases and the void content increases. In this article, the phenomena leading to deconsolidation are investigated, with ...
The evolution of morphology of reactive thermoplastic/unsaturated polyester blends at the surface of glass fibers is investigated during curing. The study focuses on two different types of thermoplastics, incompatible and compatible respectively with the p ...
Abstract This study describes the development and validation of a Radiance model for a translucent panel. Using goniophotometer data combined with integrating sphere measurements, optical properties of the panel were derived and converted into a Radiance m ...
A computational analysis of the longitudinal deformation of continuous fibre reinforced metals is presented. Elastic and elastic-plastic matrix behaviour are considered. Analytical approaches are confronted with finite element analyses (FEA) for varying fi ...
