Publications associées à Revenu (métallurgie)

Composition and Element Distribution Mapping of γ′ and γ" Phases of Inconel 718 by High-Resolution Scanning Transmission Electron Microscopy and X-ray Energy-Dispersive Spectrometry

The main strengthening mechanism for Inconel 718 (IN718), a Ni-based superalloy, is precipitation hardening by gamma ' and gamma '' particles. It is thus essential, for good alloy performance, that precipitates with the desired chemical composition have ad ...

MDPI2024

Dislocation Hardening in a New Manufacturing Route of Ferritic Oxide Dispersion-Strengthened Fe-14Cr Cladding Tube

Roland Logé

The microstructure evolution associated with the cold forming sequence of an Fe-14Cr-1W-0.3Ti-0.3Y2O3 grade ferritic stainless steel strengthened by dispersion of nano oxides (ODS) was investigated. The material, initially hot extruded at 1100 degrees C an ...

MDPI2024

Modeling and characterization of the nucleation and growth of carbon nanostructures in physical synthesis

Kevin Rossi

Carbon nanostructures formed through physical synthesis come in a variety of sizes and shapes. With the end goal of rationalizing synthetic pathways of carbon nanostructures as a function of tunable parameters in the synthesis, we investigate how the initi ...

ELSEVIER2023

Micromechanics of oxide inclusions in ferrous alloys

Alejandra Inés Slagter

Oxide inclusions are inevitably present in steel as a direct consequence of the steelmaking process; as a result, a cubic centimetre of modern steel will generally contain about a million of these hard and brittle micrometre-sized ceramic particles. Inclus ...

EPFL2023

Imaging Radial Distribution Functions of Complex Particles by Relayed Dynamic Nuclear Polarization

David Lyndon Emsley, Arthur César Pinon, Pierrick Berruyer

The physical properties of many modern multi-component materials are determined by their internal microstructure. Tools capable of characterizing complex nanoscale architectures in composite materials are, therefore, essential to design materials with targ ...

2023

Microstructure et usinabilité d'alliages de titane béta-métastable

Loïc Favre

Titanium has become in recent years an interesting material in many applications that require a combination of high mechanical properties and low density. It has the peculiarity of undergoing an allotropic transformation at 882°C. Below this temperature, ...

EPFL2023

Non-Linear Behaviors In The Dynamics Of Complex Systems Through A Multifractal Hydrodynamic Model

Maria-Alexandra Paun

Some non-linear behaviors in the dynamics of complex systems using the Scale Relativity Theory in the form of Multifractal Hydrodynamic Model are analyzed. By assimilating any complex system to a mathematical multifractal-type object, it is shown that the ...

UNIV POLITEHNICA BUCHAREST, SCI BULL2022

Optical fibre based quench detection in HTS applications using machine learning classifiers

Nicolo' Riva, Arooj Akbar, Bertrand Dutoit, Bertrand Dutoit

A Mach-Zehnder Interferometer (MZI) based optical fibre sensing technique, developed and patented by EPFL, is an efficient and economical way to detect hotspots in High Temperature Superconductor (HTS) applications. Due to the MZI sensitivity being a compo ...

Elsevier2022

Micro-addition of Fe in highly alloyed Cu-Ti alloys to improve both formability and strength

Roland Logé, Cyril Cayron, Baptiste Thomas Jean Rouxel

Cu-Be alloys provide excellent electrical and mechanical properties, but present serious health hazards during manufacturing. Among alternative alloys, the Cu-Ti system has the highest yield strength; however, Ti cannot be easily solutionized at concentrat ...

ELSEVIER SCI LTD2022

Theory-guided design of high-strength, high-melting point, ductile, low-density, single-phase BCC high entropy alloys

William Curtin, Christian Leinenbach, Carolina Baruffi, You Rao

The search for new high-temperature alloys that can enable higher-efficiency/lower-emissions power generation has accelerated with the discovery of body-centered cubic (bcc) refractory High Entropy Alloys (HEAs). These many-component, non-dilute alloys in ...

PERGAMON-ELSEVIER SCIENCE LTD2022