Publications associées à Holland Tunnel

Direct Visualization of Atomic-Scale Heterogeneous Structure Dynamics in MnO2 Nanowires

Manganese oxides are attracting great interest owing to their rich polymorphism and multiple valent states, which give rise to a wide range of applications in catalysis, capacitors, ion batteries, and so forth. Most of their functionalities are connected t ...

AMER CHEMICAL SOC2021

Empirical investigation of the emission-macroscopic fundamental diagram

Nikolaos Geroliminis, Emmanouil Barmpounakis, Martí Montesinos Ferrer, Eric Justin Gonzales

Vehicle emissions are a major contributor of air pollution in urban areas, with severe consequences for public health and the environment. This paper focuses on analyzing vehicle emissions in a multimodal urban context to better understand its determinants ...

2021

Experimental Study at Prototype Scale of a Self-priming Free-Surface Siphon

Giovanni De Cesare, Paloma Furlan

This study is within the frame of the construction of the rail link between Geneva Cornavin station, Eaux-Vives station and Annemasse (CEVA). The project area is located at a cut-and-cover tunnel built by slurry walls located in the alluvium of the Foron R ...

Springer2018

Advanced models for stress evaluation and safety assessment in steel-lined pressure tunnels

Anton Schleiss, Pedro Filipe De Almeida Manso, Alexandre Jean Pachoud

An accurate estimation of the stress in a steel liner is required for the design of steel-lined pressure shafts, both with regard to safety assessment of ageing steel-lined waterways of hydropower plants built in the 20th century, and for new projects whic ...

2018

Stress intensity factors for axial semi-elliptical surface cracks and embedded elliptical cracks at longitudinal butt welded joints of steel-lined pressure tunnels and shafts considering weld shape

Anton Schleiss, Pedro Filipe De Almeida Manso, Alexandre Jean Pachoud

When for steel liners of pressure tunnels and shafts high-strength steels are used, welded joints are subject to the risk of hydrogen induced cold-cracking in the base material. Longitudinal butt welded joints are critical regions as they are loaded transv ...

Elsevier2017

Influence of geometrical imperfections and flaws at welds of steel liners on fatigue behavior of pressure tunnels and shafts in anisotropic rock

Alexandre Jean Pachoud

The recent development of high-strength (HSS) weldable steels has enlarged the range of design alternatives for the optimization of high-head steel-lined pressure tunnels and shafts (SLPT&S) in the hydropower industry. With the liberalization of the Europe ...

EPFL2017

Experimental study at prototype scale of a self-priming free surface siphon

Giovanni De Cesare, Paloma Furlan

This study is within the frame of the construction of the rail link between Geneva Cornavin station, Eaux-Vives station and Annemasse (CEVA). The project area is located at a cut-and-cover tunnel built by slurry walls located in the alluvium of the Foron R ...

2017

Physical and 3D numerical simulation of the flow in the tailrace of a hydroelectric power plant to design fishway entrances

Giovanni De Cesare, Pierre Bourqui

This study is within the frame of the construction of the rail link between Geneva Cornavin station, Eaux-Vives station and Annemasse (CEVA). The project area is located at a cut-and-cover tunnel built by slurry walls located in the alluvium of the Foron R ...

2017

Probabilistic simulations of TBM Tunnelling in highly fractured and faulted rocks

Federica Sandrone, Jian Zhao, Jean-Paul Dudt, Erika Paltrinieri

Despite the potential excellent performance of TBMs in favourable ground conditions, the presence of fault zones or heavily jointed rocks represent important geological hazards encountered during tunnel excavation. The effects of these challenging environm ...

Elsevier2016

Stresses and displacements in steel-lined pressure tunnels and shafts in anisotropic rock under quasi-static internal water pressure

Anton Schleiss, Alexandre Jean Pachoud

Steel-lined pressure tunnels and shafts are constructed to convey water from reservoirs to hydroelectric power plants. They are multilayer structures made of a steel liner, a cracked backfill concrete layer, a cracked or loosened near-field rock zone and a ...

Springer Wien2016