Publications associées à Plastique à renfort de verre

Effect of Natural Weathering on Durability of Pultruded Glass Fiber-Reinforced Bridge and Building Structures

Thomas Keller, Anastasios Vassilopoulos, Julia De Castro San Roman Fest, Nikolaos Alexandros Theodorou

After 17 and 15years of use, respectively, a detailed inspection of a pedestrian bridge and a 5-story building structure composed of partly adhesively bonded pultruded glass fiber-reinforced polymer (GFRP) profiles was conducted accompanied by full-scale s ...

American Society of Civil Engineers2016

Aramid/glass fiber-reinforced thermal break - thermal and structural performance

Thomas Keller, Julia De Castro San Roman Fest, Kyriaki Goulouti

Energetically weak points in thermally insulated building envelopes are formed by thermal breaks that are implemented to structurally connect external balconies to internal slabs. Current thermal breaks comprise stainless steel bars that penetrate the insu ...

Elsevier2016

Effect of service temperature on the flexural creep of vacuum infused GFRP laminates used in sandwich floor panels

Thomas Keller, Mário Alexandre De Jesus Garrido

This paper presents an experimental and analytical study about the effect of temperature on the flexural creep of GFRP laminates produced by vacuum infusion. Such laminates are considered for use in the faces of sandwich panels for building floor applicati ...

Elsevier2016

Pull-out behavior of CFRP single-strap ground anchors

Thomas Keller, Anastasios Vassilopoulos, Haifeng Fan

Pull-out experiments were performed on four carbon fiber-reinforced polymer (CFRP) ground anchors simulating their applications in rock and soil. The CFRP tendons used in these anchors comprise a single-strap end on both the ground and air sides. On the gr ...

2016

Large scale fiber bridging in mode I intralaminar fracture. An embedded cell approach

John Botsis, Georgios Pappas, Luis Pablo Canal Casado

Fiber reinforced composites can develop large scale bridging upon mode I fracture. This toughening mechanism depends on the constituents and the geometry of the specimen, and is especially important in unidirectional laminates when fracture is parallel to ...

Elsevier2016

Micro-structuring of glassy carbon for precision glass molding of binary diffractive optical elements

Hans Peter Herzig, Toralf Scharf, Karin Prater

Precision glass molding is a more cost efficient process for the large volume manufacturing of highly complex optical surfaces than direct manufacturing. Glassy carbon (GC) molds are used for precision glass molding, because they can be operated at tempera ...

Optical Society of America2016

Processing and damage recovery of intrinsic self-healing glass fiber reinforced composites

Véronique Michaud, Federica Sordo

Glass fiber reinforced composites with a self-healing, supramolecular hybrid network matrix were produced using a modified vacuum assisted resin infusion moulding process adapted to high temperature processing. The quality and fiber volume fraction (50%) o ...

Institute of Physics2016

Pull-out behavior of CFRP ground anchors with two-strap ends

Thomas Keller, Anastasios Vassilopoulos, Haifeng Fan

Pull-out experiments were performed on three carbon fiber-reinforced polymer (CFRP) ground anchors simulating their applications in different rock types which provided different confinement levels. The CFRP tendons comprised, on the ground side, a prefabri ...

The Hong Kong Polytechnic University2016

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Plastique à renfort de verre

Effect of Natural Weathering on Durability of Pultruded Glass Fiber-Reinforced Bridge and Building Structures

Aramid/glass fiber-reinforced thermal break - thermal and structural performance

Effect of service temperature on the flexural creep of vacuum infused GFRP laminates used in sandwich floor panels

Screening method for the onset of bonding of molten polyamide resin layers to continuous fiber reinforced laminate sheets

Pull-out behavior of CFRP single-strap ground anchors

Large scale fiber bridging in mode I intralaminar fracture. An embedded cell approach

Micro-structuring of glassy carbon for precision glass molding of binary diffractive optical elements

Processing and damage recovery of intrinsic self-healing glass fiber reinforced composites

Energy dissipation during delamination in composite materials - An experimental assessment of the cohesive law and the stress-strain field ahead of a crack tip

Pull-out behavior of CFRP ground anchors with two-strap ends

Graph Chatbot

Chattez avec Graph Search

Micro-structuring of glassy carbon for precision glass molding of binary diffractive optical elements

Effect of Natural Weathering on Durability of Pultruded Glass Fiber-Reinforced Bridge and Building Structures

Aramid/glass fiber-reinforced thermal break - thermal and structural performance

Pull-out behavior of CFRP single-strap ground anchors

Large scale fiber bridging in mode I intralaminar fracture. An embedded cell approach

Effect of service temperature on the flexural creep of vacuum infused GFRP laminates used in sandwich floor panels

Processing and damage recovery of intrinsic self-healing glass fiber reinforced composites

Screening method for the onset of bonding of molten polyamide resin layers to continuous fiber reinforced laminate sheets

Pull-out behavior of CFRP ground anchors with two-strap ends

Energy dissipation during delamination in composite materials - An experimental assessment of the cohesive law and the stress-strain field ahead of a crack tip