Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Fatigue cracks tend to initiate on the rebar surface and therefore, the surface conditions may control their fatigue behaviour. This study investigates the influence of surface microstructure and roughness dispersion on the scatter and fatigue life of hot ...
Various thermo-mechanical treatments were applied to refine and homogenise grain size and improve mechanical properties of hot-isostatically pressed (HIP) 14%Cr ODS ferritic steel. The grain size was reduced, improving mechanical properties, tensile streng ...
A W-2Y(2)O(3) composite has been developed by powder metallurgy methods in collaboration with the Plansee Company (Austria). The microstructure of the composite was analyzed using transmission electron microscopy and electron backscatter diffraction in sca ...
We explore the influence of the metal microstructure on the compressive flow stress of replicated microcellular 400-mu m pore size Al-4.5 wt%Cu solidified at two different solidification cooling rates, in the as-cast and T6 conditions. It is found that the ...
A W-2Y(2)O(3) composite is produced by powder metallurgy, including the pressing of the mixed elemental powders, their sintering and hot forging. The microstructure of the obtained composite is investigated using light microscopy, scanning electron microsc ...
Ferritic ODS steels containing 14 or 18 wt.% Cr are produced by mechanical alloying (MA), hot consolidation and cold working. This study focuses on the evolution of interstitials such as oxygen, nitrogen and carbon at each stage of the fabrication route by ...
A new martensitic ODS alloy (nominal composition Fe-9Cr-1W-0.2Ti-0.3Y 2O3) has recently been developed at CEA Saclay to achieve the goals defined for GEN IV reactors. The aim of this paper is to present the main challenges involved in the manufacturing of ...
A W-2Y(2)O(3) material was developed in collaboration with the Plansee Company (Austria). An ingot of the material having approximate dimension of 95 mm x 20 mm was fabricated by mixing the elemental powders followed by pressing, sintering and hot forging. ...
The occurrence of hot tearing during the industrial direct chill (DC) casting process results in significant quality issues and a reduction in productivity. In order to investigate their occurrence, a new semisolid constitutive law (Phillion et al.) for AA ...
We present a process for the production of Cu-Al matrix composites containing between 25 and 30 vol.% in situ Al2O3. The composites are prepared by pressing, heat-treating and hot working blended powders of Cu, Al and CuO packed into copper alloy cans. The ...