Pierre-Etienne BourbanBackground 1990 Ingénieur en science des matériaux 1993 PhD in materials science Activities 1993-1994 Research at the Center for Composite Materials, University of Delaware, USA (ccm.udel.edu), SNSF grant Since 1994 Research and teaching at EPFL, Composites, (LTC, LPAC) 1995-1999 Coordination Swiss Priority Program on Materials research: 2.2: Composites Since 1998 Biocomposites 2004-2009 Direction of the EPFL Transdisciplinary programme in Sport and Rehabilitation 2005-2008 Member of the EPFL Vice-Presidency for Innovation and Valorisation and direction a.i.EPFL-LTC Since 2016 Direction Discovery Learning Labs Materials/Bioengineering and Engineering
Sophia HaussenerSophia Haussener is an Associate Professor heading the Laboratory of Renewable Energy Science and Engineering at the Ecole Polytechnique Fédérale de Lausanne (EPFL). Her current research is focused on providing design guidelines for thermal, thermochemical, and photoelectrochemical energy conversion reactors through multi-physics modeling. Her research interests include: thermal sciences, fluid dynamics, charge transfer, electro-magnetism, and thermo/electro/photochemistry in complex multi-phase media on multiple scales. She received her MSc (2007) and PhD (2010) in Mechanical Engineering from ETH Zurich. Between 2011 and 2012, she was a postdoctoral researcher at the Joint Center of Artificial Photosynthesis (JCAP) and the Energy Environmental Technology Division of the Lawrence Berkeley National Laboratory (LBNL). She has published over 70 articles in peer-reviewed journals and conference proceedings. She has been awarded the ETH medal (2011), the Dimitris N. Chorafas Foundation award (2011), the ABB Forschungspreis (2012), the Prix Zonta (2015), the Global Change Award (2017), and the Raymond Viskanta Award (2019), and is a recipient of a Starting Grant of the Swiss National Science Foundation (2014). She is a deputy leader in the Swiss Competence Center for Energy Research (SCCER) on energy storage and acts as a Member of the Scientific Advisory Council of the Helmholtz Zentrum.
Paul BowenDr. P. Bowen after gaining his BSc in Physics at Imperial College (UK), he obtained his Ph.D. in Physical Chemistry in the field of catalysis from the University of Cambridge, UK, in 1982, He then worked at the BP Research Centre, Sunbury, UK, for 4 years in applied surface sciences before moving to Switzerland and EPFL in 1987. He has been at the Powder Technology Laboratory, in the Materials Institute since its conception in 1988. He has over 190 publications and has written an undergraduate book on ceramic synthesis and processing. Education: 1976-1979 Imperial College of Science and Technology, University of London. B.Sc. Honours in Physics. 1979-1982 Department of Physical Chemistry, University of Cambridge. Certificate of Postgraduate Studies in Chemistry. Thesis: A Mössbauer Study of Some Clay Minerals and their Surfaces. Ph.D. in Physical Chemistry. Thesis: An Iron-57 and Tin-119 Mössbauer Spectroscopic Study of Some Graphite Intercalation Compounds and Carbon Supported Iron Catalysts. Professional Experience: 1983-1986 Research Scientist (Physical Chemist), New Technology Division, British Petroleum Company plc, BP Research Centre, Sunbury on Thames, Middlesex TW16 7LN, England. 1987-1988 Engineer, Ceramics Laboratory, Département des Matériaux, Ecole Polytechnique Fédérale de Lausanne, CH - 1015 Lausanne, Switzerland. 1988-2008 Research Associate/lecturer, Powder Technology Laboratory (Present) Institute des Matériaux, Ecole Polytechnique Fédérale de Lausanne, CH - 1015 Lausanne, Switzerland. 1988- 2015 Maitre DEnsiegnement et Recherche (Lecturer & Researcher), Powder Technology Laboratory, Institute des Matériaux, Ecole Polytechnique Fédérale de Lausanne,CH - 1015 Lausanne, Switzerland 2015 – present Adjunct Professor (Professeur Titulaire), Powder Technology Laboratory (LTP), Materials Institute, Ecole Polytechnique Fédérale de Lausanne (EPFL), CH - 1015 Lausanne, Switzerland
Dominique PiolettiDominique Pioletti received his Master in Physics from the Swiss Federal Institute of Technology Lausanne (EPFL) in 1992. He pursued his education in the same Institution and obtained his PhD in biomechanics in 1997. He developed original constitutive laws taking into account viscoelasticity in large deformations. Then he spent two years at UCSD as post-doc fellow acquiring know-how in cell and molecular biology. He was interested in particular to gene expression of bone cells in contact to orthopedic implant. In April 2006, Dominique Pioletti was appointed Assistant Professor tenure-track at the EPFL and is director of the Laboratory of Biomechanical Orthopedics. His research topics include biomechanics and tissue engineering of musculo-skeletal tissues; mechano-transduction in bone; development of orthopedic implant as drug delivery system. Since 2013, he has been promoted to the rank of Associate Professor.
Alfio QuarteroniOf italian nationality, Alfio Quarteroni was born on May 30th 1952. He pursued his studies in mathematics at University of Pavia and at University of Paris VI. In 1986 he was nominated full professor at Catholic University of Brescia, later professor in mathematics at University of Minnesota at Minneapolis and professor in numerical analysis at Politecnico di Milano. He is designated full professor in 1997 and enters into service with EPFL in 1998. At EPFL, he teaches numerical analysis to engineers and mathematicians and holds specialized courses about mathematical modelling and scientific computing for master and PhD students. He had been scientific director of CRS4, plenary speaker of more than two hundred international conferences; he is member of the European Academy of Sciences, the Italian Academy of Sciences, the Lombard Academy of Science and Letters. He is Editor in Chief of two book series (MS&A and Unitext) by Springer, associate editor of 25 international journals. He has been plenary speaker at the International Congress of Mathematicians ICM2006. He had been responsible of several European research networks. His team has carried out the aerodynamic and hydrodynamic simulations for the optimization of Alinghi, the Swiss sailing yacht that has won two editions of the America's Cup in 2003 and 2007.
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Michel RappazAprès un doctorat en physique du solide (1978) de l’Ecole Polytechnique Fédérale de Lausanne (EPFL), un post-doc à Oak Ridge National Laboratory, Michel Rappaz rejoint l’Institut des matériaux de l’EPFL en 1981. Après un passage de deux ans dans un bureau d’ingénieurs, il revient à l’EPFL en 1984 où il est nommé Professeur titulaire en 1990, puis Professeur ordinaire en 2003. Après sa retraite de l’EPFL en 2015, il est actuellement Professeur émérite et consultant indépendant auprès de divers centres de recherche et industries.
Ses principaux centres d’intérêt sont les transformations de phase et la solidification, en particulier le couplage des aspects macroscopiques de transferts de chaleur et de masse à l’échelle des procédés avec les aspects microscopiques de germination-croissance des microstructures et des défauts. Parmi ses diverses réalisations, on peut mentionner le développement d’Automates Cellulaires couplés avec la méthode d’Eléments Finis (modèle CAFE) pour la prédiction des structures de grains en solidification, le développement de modèles granulaires pour la fissuration à chaud, l’application de la méthode de champ de phase pour la compréhension de diverses microstructures, la découverte de la germination assistée dans certains alliages par des phases quasicrystallines, ainsi que de nombreuses études touchant aussi bien les aspects fondamentaux de formation des structures que des aspects plus appliqués des procédés.
Certains modèles développés dans son laboratoire ont été commercialisés par une spin-off fondée en 1991 (Calcom SA), faisant partie actuellement du groupe français ESI. Michel Rappaz a initié en 1992 un cours annuel de formation continue en solidification, suivi à ce jour par plus de 900 participants venant d’une quarantaine de pays. Il collabore actuellement avec une autre spin-off du laboratoire fondée en 2014, Novamet SàrL.
Michel Rappaz a reçu de nombreux prix et distinctions, en particulier le prix Mathewson de co-auteur (1994) et auteur (1997) de l’American Mineral, Metals and Materials Society (TMS), le prix de la fondation Koerber avec les Profs Y. Bréchet et M. Asbby (1996), la médaille Sainte-Claire Deville (1996) et la Grande Médaille (2011) de la Société Française des Matériaux (SF2M), le prix Bruce Chalmers de la TMS (2002), le prix Mc Donald Memorial Lecture du Canada (2005), la médaille d’or de la Société Européenne des Matériaux (FEMS, 2013) et le prix Brimacombe de la TMS (2015). Il fait partie des “Highly-Cited Authors” de ISI, il est fellow des sociétés ASM, IOP et TMS, et a écrit plus de 200 publications et deux livres.
Jan Van HerleNé à Anvers, Belgique, 1966. En Suisse depuis 1983. Naturalisé Suisse en 2004 par persuasion de la culture suisse démocratique et participative 'bottom-up'. Pas de double nationalité. Conseiller communal durant 2 mandats de 5 ans de 2006 à 2016.
1987 : Chimiste de l'Université de Bâle (CH).
1988 : Post-grade informatique de l'Ecole d'Ingénieurs de Bâle.
1989 : Stage industriel chez ABB à Baden (CH).
1990-1993 : Thesè EPFL
1994-1995 : Postdoc au Japon (Tokyo).
1996-2000 : Chercheur à l'EPFL, Dpt. Chimie, responsable de groupe.
1998-2000 : Master en Energy Technology, EPFL.
2000 : Cofondateur de HTceramix SA (EPFL spin-off), à Yverdon (actuellement 12 employés). La maison mère SOLIDpower en Italie, qui a acheté notre technologie en 2007, emploie 250 personnes et a levé 70 MCHF.
2000-2012 : 1er Assistant et chargé de cours en STI-IGM. Promu à MER en 2008.
2013-présent: MER responsable d'unité.
Output : 135 publications, 120 papiers de conférence, 15 théses de doctorat, 4 thèses en cours, 37 thèses de master. Facteur h-42, >5000 citations.
Fonds levés jusqu'à présent >19 MCHF.
5 langues couramment (néerlandais, français, allemand (y.c. suisse-allemand), anglais, espagnol).
