Publications associées à Polyhydroxyalcanoate

A Sustainable Printed Chitosan-Based Sensor for Acetone Detection

Biomedical sensing applications, including breath analysis, contribute to increasing the amount of electronic waste, as the sensors are frequently disposed, due to hygienic considerations. Consequently, the development of sustainable sensor solutions is cr ...

IEEE2023

Algal cellulose, production and potential use in plastics: Challenges and opportunities

Christian Ludwig, Horst Pick, Enio Daniel Zanchetta, Eya Nicodeme, Tobias Borgmeyer, Adrian Pulgarin

The development of new biodegradable plastic materials from renewable sources is a major challenge for plastic industries to provide sustainable alternatives to petroleum plastic. Bio-based plastics are generally obtained from photosynthetic biomass such a ...

2021

Critical overview of biomass feedstocks as sustainable substrates for the production of polyhydroxybutyrate (PHB)

Edgard Gnansounou, Ranjna Sirohi

Polyhydroxybutyrates (PHBs) are a class of biopolymers produced by different microbial species and are biodegradable and biocompatible in nature as opposed to petrochemically derived plastics. PHBs have advanced applications in medical sector, packaging in ...

Elsevier2020

Biodegradable HEMA-based hydrogels with enhanced mechanical properties

Dominique Pioletti, Mohamadreza Nassajian Moghadam

Hydrogels are widely used in the biomedical field. Their main purposes are either to deliver biological active agents or to temporarily fill a defect until they degrade and are followed by new host tissue formation. However for this latter application, bio ...

Wiley-Blackwell2016

Mechanism of formation of silver nanoparticles in MAG-DMAEMA copolymer aqueous solutions

Philippe Buffat, Elena Suvorova Buffat

Dispersed Ag nanoparticles were prepared in aqueous solutions in the presence of pure poly[2-(dimethylamino)ethyl methacrylate] (poly-DMAEMA), poly[2-deoxy-2-methacrylamido-d-glucose] (poly-MAG), and their copolymers of poly[MAG–DMAEMA] with different mole ...

Springer Verlag2015

Ba0.5Sr0.5Co0.8Fe0.2O3-delta (BSCF) feedstock development and optimization for thermoplastic forming of thin planar and tubular oxygen separation membranes

Stefan Diethelm

This paper presents the processing steps for producing thin planar and tubular oxygen separation membranes by thermoplastic forming of Ba0.5Sr0.5Co0.8Fe0.2O3-delta (BSCF) with polystyrene (PS) and stearic acid (SA) as binder. The influence of powder conten ...

Elsevier Science Bv2013

Synthesis of Functional Polyesters via Baylis-Hillman Polymerization

Sanhao Ji

Aliphatic polyesters receive increasing attention over the last years driven by their application as biodegradable substitutes for conventional commodity thermoplastics and applications in the biomedical field, where amongst the family of biodegradable pol ...

EPFL2011

Surface Assembly of Catechol-Functionalized Poly(l-lysine)-graft-poly(ethylene glycol) Copolymer on Titanium Exploiting Combined Electrostatically Driven Self-Organization and Biomimetic Strong Adhesion

Cyril Portmann, Karl Gademann

Nonfouling coatings, based on surface-tethered, hydrophilic polymer chains, have widespread application in areas such as biosensing, medical devices, and biotechnology. Self-organization of polymers is a particularly attractive approach given its simplicit ...

American Chemical Society2010

Phase separation at the fiber-matrix interface in composites based on a thermoplastic/polyester blend

Véronique Michaud, Xavier Bulliard

A study of the microstructure developing at the surface of glass fibers in a poly(vinyl acetate) (PVAc)/polyester blend is presented. Three different experimental methods are used: a technique based on the Wilhelmy method to measure the wettability of the ...

2005

In vivo performance of a new biodegradable polyester urethane system used as a nerve guidance channel

Patrick Aebischer

Biodegradable nerve guidance channels (NGCs) represent a promising alternative to current clinical nerve repair procedures. To be suitable as a NGC material, the polymer system should possess elastomeric properties and degrade at a defined rate without int ...

1998