Publications associées à Densité massique d'énergie

Reversible photo-electrochemical device for solar hydrogen and power generation

Sophia Haussener, Saurabh Yuvraj Tembhurne, Alexandre Dominique M. Cattry, Matthieu Jonin, Mahendra Patel

A reversible photo-electrochemical device operating under concentrated irradiation could offer a stand-alone solution for producing solar fuel (in photo-driven electrolysis mode) and power (in fuel cell mode). This strategy would present the advantage of h ...

2024

Redefining Energy Density for an uniaxial Dielectric Elastomer Actuator

Yves Perriard, Yoan René Cyrille Civet, Jonathan André Jean-Marie Chavanne

The dielectric elastomer actuator (DEA) is a technology known to potentially provide high energy density (0.3 - 0.4 J.cm(-3)). However, in the literature, few demonstrations have been done to evaluate this figure. To well understand the ability of this tec ...

IEEE2021

Carbon-Decorated Na3V2(PO4)(3) as Ultralong Lifespan Cathodes for High-Energy-Density Symmetric Sodium-Ion Batteries

Kangning Zhao, Minmin Liu

In this work, several carbon-decorated Na3V2(PO4)(3) materials (NVP@C-750/800/850) are successfully fabricated using a solgel approach and subsequent heat treatment. When NVP@C-800 is used as a cathode, it shows an ultralong cycle life (2000 cycles) at a h ...

AMER CHEMICAL SOC2021

Inorganic and Metal-Organic Heterogeneous Catalysts for Hydrogen Energy Applications

Fatma Pelin Uran

The main focus of this thesis is the exploration of inorganic and metal-organic heterogeneous catalysts for hydrogen (H2) energy applications. In particular, we investigated metal nanoparticles (NPs) and metal-organic frameworks (MOFs) for their employment ...

EPFL2021

Mn4+-Substituted Li-Rich Li1.2Mn0.43+Mnx4+Ti0.4-xO2 Materials with High Energy Density

Chunyang Zhang, Yong Yang

In this work, Li-rich Li1.2Mn0.43+Mnx4+Ti0.4-xO2 (LMMxTO, 0

2020

Perspective-Electrochemical Stability of Water-in-Salt Electrolytes

Corsin Battaglia, David Reber

The water-in-salt approach has expanded the electrochemical stability window of aqueous electrolytes, enabling novel aqueous batteries with relatively high cell voltages and energy densities. However, the stability of these electrolytes tends to be overest ...

2020

Cylindrical Dielectric Elastomer Actuator for Cardiac Assist Device

Jonathan André Jean-Marie Chavanne

This work has been triggered because of the need for a new way to relieve the heart. Current solutions are based on invasive systems. The main problem of such assistance is infectious risks. State of the art to define an alternative has allowed highlightin ...

EPFL2019

Periodic cellular aluminum structures for space applications : from casting to additive manufacturing

Florian Thibaut Gallien

Mass is one of the crucial parameters for hardware that has to be placed in Earth orbit. Due to its harsh environment, a material with highest specific properties is desired to achieve space missions. The rise and development of new technologies, such as a ...

EPFL2018

Extraction of carotenoids from Chlorella vulgaris using green solvents and syngas production from residual biomass

Christof Holliger, Christian Ludwig, Shivom Sharma, Jean-Paul Schwitzguebel, Dominik Refardt

A combined process for carotenoids extraction and efficient bioenergy recovery from the wet microalgae biomass is proposed. High added-value products could thus be extracted prior a hydrothermal gasification of the algal biomass into synthetic natural gas. ...

2017

A new class of non-empirical explicit density functionals on the third rung of Jacob’s ladder

Anne-Clémence Corminboeuf, Piotr De Silva

We construct an orbital-free non-empirical meta-generalized gradient approximation (GGA) functional, which depends explicitly on density through the density overlap regions indicator [P. de Silva and C. Corminboeuf, J. Chem. Theory Comput. 10, 3745 (2014)] ...

American Institute of Physics2015