Thierry MeyerOriginaire de Genève, né en 1961, Thierry Meyer reçoit en 1986 son diplôme (MSC) dingénieur chimiste de lEcole Polytechnique Fédérale de Lausanne (EPFL). Il reçoit en 1989 son doctorat (PhD) à EPFL pour sa thèse sur le micromélange dans des milieux fortement visqueux. Il rejoint l'institut du génie chimique de 1989 jusqu'à 1993 en tant que scientifique senior dans le domaine des réactions de polymérisation. Il entre, en 1994, à la division " Pigments " de Ciba-Geigy SA, où il travaille au développement et à la mise en production de plusieurs pigments de hautes performances. Il assume la fonction de chef de projets pour l'introduction de nouveaux pigments en fabrication. En 1997, il est nommé chef de fabrication pour la production de la division pigments de Ciba Spécialités Chimiques SA à Monthey. Il est pendant cette même période nommé chargé de cours à l'EPFL. Retournant à l'institut du génie chimique d'EPFL à Lausanne vers la fin de 1998, il a été nommé « d'enseignement de maître et de recherche » (MER) pour mener un nouveau groupe de recherche dans le domaine des polymères et les fluides supercritiques, et enseigner aux chimistes, ingénieurs chimistes et en sciences des matériaux, les disciplines telles que le développement de procédés, l'introduction au génie chimique, le chimie organique et des polymères au programme de bachelor et master. En 2005 il assume la responsabilité du service de Sécurité et Santé au Travail de la faculté des sciences de base en plus de ses activités de recherches traitant de la gestion des risques (risk management) et des fluides supercritiques. Il enseigne actuellement l'introduction au génie chimique au niveau bachelor, le risk management au niveau master et des cours de formation continue dans le domaine de la sécurité (safety) et de la gestion des risques (engineering risk management). Il agit également comme consultant et expert en matière de risk management et génie chimique auprès du tribunal de l'ICC (chambre de commerce internationale) du World Business Organization, auprès de plusieurs bureaux d'études et de consultants ainsi quauprès dindustries. Thierry Meyer est actuellement membre de plusieurs associations internationales de la fédération Européenne du génie chimique et de la société chimique Américaine et American Institute of Chemical Engineers. Il a été élu Président de la European Working Party on Polymer Reaction Engineering de 2001 jusqu'à 2006. Il est actuellement le représentant académique Suisse dans la European Working Party on Loss Prevention and Safety Promotion et dans la European Working Party on Education. Il est membre de plusieurs editorial boards: Chemical Engineering Research and Design, Macromolecular Reaction Engineering, Chemical Engineering and Technology, Journal of Chemical Health and Safety.
Pierre-Etienne BourbanBackground 1990 Ingénieur en science des matériaux 1993 PhD in materials science Activities 1993-1994 Research at the Center for Composite Materials, University of Delaware, USA (ccm.udel.edu), SNSF grant Since 1994 Research and teaching at EPFL, Composites, (LTC, LPAC) 1995-1999 Coordination Swiss Priority Program on Materials research: 2.2: Composites Since 1998 Biocomposites 2004-2009 Direction of the EPFL Transdisciplinary programme in Sport and Rehabilitation 2005-2008 Member of the EPFL Vice-Presidency for Innovation and Valorisation and direction a.i.EPFL-LTC Since 2016 Direction Discovery Learning Labs Materials/Bioengineering and Engineering
John Christopher PlummerÉCOLE POLYTECHNIQUE FÉDÉRALE DE LAUSANNE (EPFL), Lausanne, Switzerland 1989-
Collaborateur Scientifique/Chargé de Cours (Lecturer) (1998-)
Privat Docent (1998)
Laboratoire de Technologie des Composites et Polymères (LTC) (2000-)
Laboratoire de Polymères (LP) (1998-2000)
UNIVERSITY OF MICHIGAN (UMICH), Ann Arbor, MI, USA 1995-1996
Visiting Scientist, Department of Materials Science and Engineering (DMSE)
UNIVERSITY OF CAMBRIDGE, Cambridge, UK 1986-1989
Research Assistant, Physics and Chemistry of Solids Group (PCS), Department of Physics
UNIVERSITY OF CAMBRIDGE, Cambridge, UK, Department of Materials 1986
PhD, "Flux Pinning in Type-II Superconductors"
UNIVERSITY OF CAMBRIDGE, Cambridge, UK, 1982
BA/MA Honours Degree in Natural Sciences
Awards
Prix R&R Haenny, 2007, DuPont Research Award, 2003, Commendation, British Polymer Group, Reading 1989
RECENT PUBLICATIONS
Ramier J, Da Costa N, Plummer CJG, Leterrier Y, Manson JAE, Eckert R, Gaudiana R, Cohesion and adhesion of nanoporous TiO2 coatings on titanium wires for photovoltaic applications, Thin solid films, 516, 1913 (2008).
Ramier J, Plummer CJG, Leterrier Y, Manson JAE, Eckert B, Gaudiana R, Mechanical integrity of dye-sensitized photovoltaic fibers, Renewable energy, 33, 314 (2008).
- Houphouet-Boigny C, Plummer CJG, Wakeman MD, Manson JAE, Hybrid glass fiber-reinforced thermoplastic nanocomposites, J. Thermoplast. Comp. Mater., 21, 103 (2008).
Ternat C, Ouali L, Sommer H, Fieber W, Velazco MI, Plummer CJG, Kreutzer G, Klok HA, Manson JAE, Herrmann, Investigation of the Release of Bioactive Volatiles from Amphiphilic Multiarm Star-Block Copolymers by Thermogravimetry and Dynamic Headspace Analysis, Macromolecules 41(19), 7079 (2008).
Ruggerone, R., Plummer, C.J.G., Negrete Herrera, N., Bourgeat-Lami, E., Månson, J-EA, Mechanical properties of highly filled latex-based polystyrene/laponite nanocomposites, Solid State Phenomena Vol. 151, 30 (2009).
Plummer, CJG, Dalle Vacche, S, Houphouët-Boigny, C, Michaud, V, Månson, JAE, Hybrid Glass Mat Reinforced Polypropylene-Montmorillonite Nanocomposites, Solid State Phenomena Vol. 151, 60 (2009).
Ruggerone, R., Plummer, C.J.G., Negrete Herrera, N., Bourgeat-Lami, E., Månson, J-EA, Highly filled polystyrenelaponite nanocomposites prepared by emulsion polymerization, European Polm. J. 45, 621 (2009).
Ruggerone, R., Plummer, C.J.G., Negrete Herrera, N., Bourgeat-Lami, E., Månson, J-EA, Fracture mechanisms in polystyrene/laponite nanocomposites prepared by emulsion polymerization, Engineering Fracture Mechanics 76, 2846 (2009)
Clausen P., Andreoni W., Curioni A., Hughs E., Plummer C.J.G. Adsorption of low-molecular-weight molecules on the surface of a sodium smectite clay: an ab initio study, Journal of Physical Chemistry C 113, 12293 (2009).
Clausen P., Andreoni W., Curioni A., Hughs E., Plummer C.J.G., Water adsorption on a sodium smectite clay surface: an ab initio study, Journal of Physical Chemistry C 113, 15218 (2009).
Molberg, M, Leterrier, Y., Plummer, C.J.G., Walder, C., Löwe, C., Opris, D.M., Nüesch, F.A., Bauer, S., Månson, J.-A.E., Frequency dependent dielectric and mechanical behaviour of elastomers for actuator applications, J. Appl. Phys. 106, 054112 (2009)
Clausen P., Signorelli M., Schreiber A., Hughes E., Plummer CJG, Fessas D., Schiraldi A., Månson E. J.-A., Equilibrium desorption isotherms of water, ethanol, ethyl acetate and toluene on a sodium smectite clay, Journal of Thermal Analysis and Calorimetry 98, 833 (2009)
Micusik, M., Bonnefond, A., Reyes, Y., Bogner, A., Chazeau, L., Plummer, C.J.G., Paulis, M., Leiza, J.R., Morphology of Polymer/Clay Latex Particles Synthesized by Miniemulsion Polymerization: Modeling and Experimental Results Macromol. React. Eng. 2010, 4, 432 (2010).
Houphouet-Boigny C., Plummer CJG, Vacche SD, Michaud V, Wakeman MD, Månson E. J.-A., Hybrid Glass Mat-reinforced Polypropylene-Montmorillonite Nanocomposites, J. Comp. Mater. 44, 1975 (2010).
Delabarde, C., Plummer C.J.G., Bourban, P.-E., Månson E. J.-A., Solidification behavior of PLLA/nHA nanocomposites, Comp. Sci. & Tech. 70, 1813 (2010).
Plummer C.J.G., Ruggerone R., Negrete-Herrera N., Bourgeat-Lami E., Månson J.-A.E., Small Strain Mechanical Properties of Latex-Based Nanocomposite Films, Macromol. Symp. 294, 1 (2010).
Dalle Vacche, S., Plummer C.J.G., Houphouet-Boigny C., Månson E. J.-A., Morphology and mechanical properties of isotactic polypropylene glass mat thermoplastic composites modified with organophilic montmorillonite, J Mater Sci 46, 2112 (2011). Kay SeverinKay Severin was born in Germany in 1967. He obtained his Ph.D. in 1995 with a thesis in the group of Prof. W. Beck, University of Munich. Subsequently, he joined the group of Prof. M. R. Ghadiri as a postdoctoral fellow. In 1997, he started independent research projects ("Habilitation") at the Department of Chemistry, University of Munich. In 2001, he became assistant professor at the Institute of Chemical Sciences and Engineering at the Swiss Federal Institute of Technology, Lausanne (EPFL). Since 2009, he is full professor at the same institute.
Awards: Bayerischer Habilitations Förderpreis (1997), ADUC award of the year (2001), Heinz Maier-Leibnitz award of the DFG (2001), award of the Karl-Ziegler foundation (2001), Arnold Sommerfeld award of the Bavarian Academy of Science (2001), Werner Prize of The Swiss Chemical Society (2003), Otto Roelen Medal of the DECHEMA (2005), award for chemistry of the Academy of Sciences, Göttingen (2007), Dalton Transactions European Lectureship (2008).
Li TangEducation and Training Postdoctoral Fellow, Massachusetts Institute of Technology, 2013 - 2016 Ph.D., University of Illinois at Urbana-Champaign, 2007 - 2012 B.S., Peking University, 2003-2007
Dominique BonvinDominique Bonvin is Professor and Director of the Automatic Control Laboratory of EPFL. He received his Diploma in Chemical Engineering from ETH Zürich, and his Ph.D. degree from the University of California, Santa Barbara. He worked in the field of process control for the Sandoz Corporation in Basel and with the Systems Engineering Group of ETH Zürich. He joined the EPFL in 1989, where his current research interests include modeling, control and optimization of dynamic systems. He served as Director of the Automatic Control Laboratory for the periods 1993-97, 2003-2007 and again since 2012, Head of the Mechanical Engineering Department in 1995-97 and Dean of Bachelor and Master Studies at EPFL for the period 2004-2011.
