Since 2000 Ecole Polytechnique Fédérale de Lausanne Switzerland, Laboratoire des systèmes écologiques (IIE-ECOS).
1999 2000 Research associate, National Research Center for Health and Environment. Institute of Hydrology Neuherberg München, Germany
1998 1999 Private consulting in hydrogeology and applied geophysics.
1995 - 1999 Research associate, University of Neuchâtel, Switzerland. Center of Hydrogeology.
1993 - 1995 Postdoc, University of Birmingham, England
1989 - 1993 PhD in groundwater geophysics (Univ. of Neuchâtel, Switzerland, Center of hydrogeology).
1986 - 1988 Postgraduate studies in hydrogeology (Univ. of Neuchâtel, Switzerland, Center of hydrogeology)
1981 - 1986 Lic. Phil. nat. (MSc) in Geology (Univ. of Neuchâtel, Switzerland)
De nationalité américaine et suisse, Giorgio Margaritondo est né à Rome (Italie) en 1946. Il a reçu la Laurea cum laude en physique de l'Université de Rome en 1969. De 1969 à 1978, il a travaillé pour le Consiglio Nazionale delle Ricerche (CNR), à Rome, à Frascati et, pendant la période 1975-1977, chez Bell Laboratories aux Etats-Unis. De 1978 à 1990, il est professeur de physique à l'Université du Wisconsin, à Madison (Etats-Unis); en 1984, il est nommé vice-directeur au Centre de rayonnement synchrotron de la même université. En 1990, il est engagé à l'EPFL comme professeur ordinaire et dirige l'Institut de physique appliquée au Département de physique. Il a été également membre honoraire du corps professoral de l'Université Vanderbilt à Nashville. En 2001 il a été nommé doyen de la Faculté des sciences de base de l'EPFL; en 2004, il a été nommé Vice-président pour les affaires académiques.; en 2010 et jusqu'à sa retraite de l'EPFL en 2016 il est devenu Doyen de la formation continue. A côté de ses cours de physique générale, son activité de recherche porte sur la physique des semiconducteurs et des supraconducteurs (états électroniques, surfaces, interfaces) et des systèmes biologiques; ses principales méthodes expérimentales sont la spectroscopie et la spectromicroscopie électroniques, l'imagerie aux rayons x et la microscopie SNOM, y compris les expériences avec le rayonnement synchrotron et le laser à électrons libres. Auteur d'environ 700 articles scientifiques et de 9 livres, il a aussi été responsable de 1995 à 1998 des programmes scientifiques du Synchrotron ELETTRA à Trieste. Depuis 1997, il a été le coordinateur de la table ronde de la Commission européenne pour le rayonnement synchrotron, et président du conseil de la "Integrated Initiative" de la Commission européenne pour les synchrotrons et les lasers à électrons libres (IA-SFS, ensuite ELISA), le plus grand réseau au monde de laboratoires dans ce domaine. En 2011-2015, il a été Editor-in-Chief du Journal of Physics D (Applied Physics). A présent, il est vice-président du conseil de l'Università della Svizzera Italiana (USI) et président du Scientific and Technological Committee de l'Istituto Italiano di Tecnologia (IIT). Il est "Fellow" de l'American Physical Society et de l'American Vacuum Society; il est également "Fellow and Chartered Physicist" de l'Institute of Physics.
Après un doctorat en physique du solide (1978) de l’Ecole Polytechnique Fédérale de Lausanne (EPFL), un post-doc à Oak Ridge National Laboratory, Michel Rappaz rejoint l’Institut des matériaux de l’EPFL en 1981. Après un passage de deux ans dans un bureau d’ingénieurs, il revient à l’EPFL en 1984 où il est nommé Professeur titulaire en 1990, puis Professeur ordinaire en 2003. Après sa retraite de l’EPFL en 2015, il est actuellement Professeur émérite et consultant indépendant auprès de divers centres de recherche et industries.
Ses principaux centres d’intérêt sont les transformations de phase et la solidification, en particulier le couplage des aspects macroscopiques de transferts de chaleur et de masse à l’échelle des procédés avec les aspects microscopiques de germination-croissance des microstructures et des défauts. Parmi ses diverses réalisations, on peut mentionner le développement d’Automates Cellulaires couplés avec la méthode d’Eléments Finis (modèle CAFE) pour la prédiction des structures de grains en solidification, le développement de modèles granulaires pour la fissuration à chaud, l’application de la méthode de champ de phase pour la compréhension de diverses microstructures, la découverte de la germination assistée dans certains alliages par des phases quasicrystallines, ainsi que de nombreuses études touchant aussi bien les aspects fondamentaux de formation des structures que des aspects plus appliqués des procédés.
Certains modèles développés dans son laboratoire ont été commercialisés par une spin-off fondée en 1991 (Calcom SA), faisant partie actuellement du groupe français ESI. Michel Rappaz a initié en 1992 un cours annuel de formation continue en solidification, suivi à ce jour par plus de 900 participants venant d’une quarantaine de pays. Il collabore actuellement avec une autre spin-off du laboratoire fondée en 2014, Novamet SàrL.
Michel Rappaz a reçu de nombreux prix et distinctions, en particulier le prix Mathewson de co-auteur (1994) et auteur (1997) de l’American Mineral, Metals and Materials Society (TMS), le prix de la fondation Koerber avec les Profs Y. Bréchet et M. Asbby (1996), la médaille Sainte-Claire Deville (1996) et la Grande Médaille (2011) de la Société Française des Matériaux (SF2M), le prix Bruce Chalmers de la TMS (2002), le prix Mc Donald Memorial Lecture du Canada (2005), la médaille d’or de la Société Européenne des Matériaux (FEMS, 2013) et le prix Brimacombe de la TMS (2015). Il fait partie des “Highly-Cited Authors” de ISI, il est fellow des sociétés ASM, IOP et TMS, et a écrit plus de 200 publications et deux livres.
Dominique Pioletti received his Master in Physics from the Swiss Federal Institute of Technology Lausanne (EPFL) in 1992. He pursued his education in the same Institution and obtained his PhD in biomechanics in 1997. He developed original constitutive laws taking into account viscoelasticity in large deformations. Then he spent two years at UCSD as post-doc fellow acquiring know-how in cell and molecular biology. He was interested in particular to gene expression of bone cells in contact to orthopedic implant. In April 2006, Dominique Pioletti was appointed Assistant Professor tenure-track at the EPFL and is director of the Laboratory of Biomechanical Orthopedics. His research topics include biomechanics and tissue engineering of musculo-skeletal tissues; mechano-transduction in bone; development of orthopedic implant as drug delivery system. Since 2013, he has been promoted to the rank of Associate Professor.
Aurèle Parriaux studied geology at the Swiss Federal Institute of Technology (EPFL) in Lausanne, Switzerland. He obtained his Ph.D. in hydrogeology and followed several postgraduate courses in hydrogeology, operational hydrology and geotechnics. He acquired a wide experience in engineering geology in the fields of motorway construction, geological hazards, underground water and geomaterials prospecting as well as the management of natural resources.
In 1991, he was appointed full Professor of Engineering Geology at EPFL and presently he is head of the Engineering and Environmental Geology Laboratory (GEOLEP) at the same institute. He leads a research team of about twenty people specializing in the fields of geological hazards and underground resources.
Professor Parriaux has significant teaching responsibilities. He teaches geology to students in 'Civil Engineering' and 'Environmental Sciences and Engineering'. Moreover, he teaches Engineering Geology at the Universitiy of Lausanne.
Parallel to his research and teaching, Aurèle Parriaux carries out expert appraisals in various fields of engineering and environmental geology. In particular, the recent appraisal of the compatibility between construction of tunnels and protection of groundwater resources.
Since the creation of the new School of Architecture, Civil and Environmental Engineering (ENAC) at the Swiss Federal Institute of Technology in Lausanne, he participates in the teaching related to territory and landscape into which he brings the geological and geomorphologic component.
Aurèle Parriaux is active in several international organizations. He was chairman of the Swiss Hydrogeological Society for six years. From 2001 to 2006 he was Director of the Civil Engineering Section of the Swiss Federal Institute of Technology of Lausanne.
In 2006, he published his book "Géologie: bases pour l'ingénieur". The second edition of this successful textbook has been published in 2009. In competition with 105 scientific books, Géologie : bases pour l'ingénieur received the Roberval Prize in 2007. The publisher CRC Press/Balkema, member of the Taylor & Francis Group, publishes an English translation of the book (Geology: basics for Engineers, 2009).
In December 2008, Prof. Parriaux was nominated Chevalier of the Order of Academic Palms by the Prime Minister of the Republic of France.
In September 2011, he left the EPFL to dedicate his time to being an independent expert. Prof. Parriaux is currently based at Chemin de Crêt de Plan 103 in La Conversion CH-1093 (www.parriauxgeo.ch). He is continuing his collaboration with EPFL, especially on the DEEP CITY Project and on landslide research.