Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The feasibility of spatially resolved Raman spectroscopy probing diffusion multiples as a high-throughput method to study phase transformations in Li-ion conductors is demonstrated. The method is applied to the pseudobinary LiBH 4-LiI system, which shows h ...
We study the state of a nanometric helium bubble in bcc-iron as a function of temperature and He content using atomistic calculations. It appears that up to moderate temperatures the Fe lattice can confine He to solid state, in good agreement with known sol ...
Cu-Ni-Sn alloys with Pb additions exhibit high mechanical strength at room temperature coupled with good machinability but experience a significant ductility loss above the melting point of lead. We explore here the influence of minor additions of Al, Mn, ...
Atomic ordering and stress-induced ordering (Zener relaxation) were studied in a series of 18-carat (75 wt%) yellow gold alloys (Au-Cu-Ag) by means of isothermal mechanical spectroscopy with a forced torsion pendulum at low frequencies. In the high-tempera ...
We have used first-principles calculations to investigate the mixing enthalpies, lattice parameters and electronic density of states of the ternary nitride systems Ti1-xAlxN, Cr1-xAlxN, Sc1-xAlxN and Hf1-xAlxN in the cubic B1 structure where the transition ...
Many commercially important alloys such as Fe-C, Fe-Ni, Cu-Zn, Cu-Sn and Ti-Al exhibit peritectic transitions on solidification. In the two-solid phase region of peritectic metallic systems, a wide spectrum of microstructures has been revealed during direc ...
Hot tearing, a severe defect occurring during solidification is the conjunction of tensile stresses which are transmitted to the mushy zone by the coherent solid underneath and of insufficient liquid feeding to compensate for the volumetric change. The RDG ...
Th. Böllinghaus, H. Herold, C. E. Cross and J.C Lippold2008
Irradiation-induced hardening and loss of ductility of ferritic/martensitic materials envisaged for future fusion reactor is still difficult to understand. In particular, helium (He), produced by transmutation by the fusion neutrons of 14 MeV, is known to ...
Alloys based on the Sn-0.7Cu-xNi system are potential Pb-free solders. In this paper we report on the solidification characteristics and microstructures of Sn-0.7Cu alloys containing 0-1,000 ppm nickel. The microstructural observations show that increasing ...
