Joseph Song Manguelle
In the last years, static power converters have become widely used in various applications. They can be found in domestic applications, railways, urban and ship transport, and even in several industrial systems. Some of these applications require a high or medium voltage power supply that is easily adjustable while providing good spectral performances. To overcome the maximum blocking voltage limits of the main power switches, multilevel techniques and other new power conversion topologies have been developed. They are series/parallel associations of existing power semiconductors, and allow generating an output voltage with many levels. The number of power semiconductors needed in these topologies increases as the number of levels increases. The power converter circuit becomes more complex and its reliability decreases. This thesis focuses on three-phase multilevel converters based on a series connection of single phase inverters (partial cells) in each phase. It's shown that, feeding partial cells with unequal DC-voltages (asymmetric feeding), increases the number of levels of the generated output voltage without any supplemental complexity to the existing topology. Voltage resolution is increased through interpolating the generated output voltage phasor (three phase voltage in α-β frame). This is achieved by seeking the non redundant switching states of the power switches. The resultant converter can generate a very high resolution voltage phasor up to the possible maximum resolution. This approach is generalized for any number of partial cells. Each partial cell is fed through a three-phase diode rectifier, fed itself through the windings of a multi-secondary low frequency power transformer. From analytical expressions in continuous and discontinuous current conix duction modes, it is shown that, from a supply network point of view, a symmetrical multilevel converter has a smaller total harmonic distortion than an asymmetrical multilevel converter with the same number of partial cells per phase. An asymmetrical multilevel converter is not more interesting than a classical three-phase converter, but its total harmonic distortion is compatible to the recommended IEEE std 519-1992. It is also shown that the advantages of an asymmetric multilevel converter from a load point of view (generation of a high resolution voltage phasor, possibility to choose the number of redundant switching states, reduction of the number of power semiconductors for the same voltage resolution, flexibility for the DC-voltage feeding choice) and the advantages of a symmetrical multilevel converter from a supply network point of view (smaller total harmonic distorsion) can be combined. Simulation results and the experimental test setup showed the reliability of the suggested approach.
EPFL2004
