Publications associées à Reflections of signals on conducting lines

Validation of short-pulse reflectometry turbulence measurements with a synthetic diagnostic

Stefano Coda, Stephan Brunner, Oleg Krutkin, Umesh Kumar, Mackenzie Peter-Fulford Van Rossem, Samuele Mazzi

Experimental measurements of the turbulence amplitude utilizing a short pulse reflectometry method are presented. Two discharges with shaped plasma possessing opposite signs of triangularity are considered and a higher turbulence amplitude is found in the ...

IOP Publishing Ltd2024

Electromagnetic time reversal for online partial discharge location in power cables: Influence of interfering reflections from grid components

Farhad Rachidi-Haeri, Marcos Rubinstein

In online single-sided partial discharge (PD) location, the measured PD reflection patterns are affected by the characteristics of all the components of the associated power network. This paper analyses the performance of a PD location method based on elec ...

2024

Exact Expressions for Lightning Electromagnetic Fields: Application to the Rusck Field-To-Transmission Line Coupling Model

Farhad Rachidi-Haeri, Marcos Rubinstein

An exact analytical expression for the electric field of the return stroke as excited by a propagating step current source is derived in this paper. This expression could be advantageously used to evaluate the disturbances caused by lightning on overhead l ...

2023

Biomaterial devices on Arecanut palm leaf for microwave applications

Anja Skrivervik, Sujith Raman

This paper presents an investigation on the possibility of arecanut palm leaf as a biomaterial substrate for various microwave devices such as transmission lines, antenna, filter and a radio frequency identification device (RFID). The dielectric properties ...

IEEE2023

High power mm-wave loss measurements of ITER ex-vessel waveguide components at the FALCON test facility at the Swiss Plasma Center

Timothy Goodman, René Chavan, Avelino Mas Sanchez, Anastasia Xydou, Humberto Torreblanca Quiroz

Many future fusion devices will rely heavily, if not solely, on electron cyclotron (EC) heating subsystems to provide bulk heating, instability control (neoclassical tearing mode (NTM) stabilization), and thermal instability control. Efficient use of the i ...

E D P SCIENCES2023

Distributed Scheme for Line Overload Mitigation With Linearized AC Power Flow

Ping Hu, Li Ding

The transmission overload after a disturbance poses significant security risk to the power system. Once it happens, an efficient remedial action must be taken to relieve the line overloads as quickly as possible. The line overload mitigation problem become ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Interaction of lightning-generated electromagnetic fields with overhead and underground cables

Farhad Rachidi-Haeri, Marcos Rubinstein, Carlo Alberto Nucci

In this chapter, we discussed the TL theory and its application to the problem of lightning electromagnetic field coupling to transmission lines. After a short discussion on the underlying assumptions of the TL theory, we described seemingly different but ...

IET2022

On the Solution of the Optimal Power Flow for Three-Phase Radial Distribution Networks With Energy Storage

Jean-Yves Le Boudec, Cong Wang, Eleni Stai

We study a multiperiod optimal power flow (OPF) problem in unbalanced three-phase radial distribution networks with batteries. To address this problem, we first take the resistance-line battery model that treats lossy batteries by adding resistive lines an ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

A Closed Time-Reversal Cavity for Electromagnetic Waves in Transmission Line Networks

Mario Paolone, Farhad Rachidi-Haeri, Marcos Rubinstein, Zhaoyang Wang, Reza Razzaghi

A closed time-reversal (TR) cavity has been considered a purely theoretical concept whose experimental realization was assumed to be impossible. In this article, we demonstrate that it is, in fact, possible to realize a closed TR cavity using a network of ...

2021

Prototype mitre bends of the ex-vessel waveguide system for the ITER upper launcher: Thermal hydraulic simulations and experiments with off-center mm-wave beams

Timothy Goodman, René Chavan, Matteo Vagnoni, Anastasia Xydou, Humberto Torreblanca Quiroz

On ITER, long pulse gyrotrons are required as a power source for electron cyclotron heating (ECH) and current drive (CD). The microwaves are guided from the gyrotrons, which are placed far from the Tokamak, into the plasma by transmission lines (TLs) and a ...

2021