Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The ITER feeders are the components that connect the ITER magnet systems located inside the main cryostat to the cryogenics, power-supply and control system interfaces outside the cryostat. The feeder busbars rely on the Cable-In-Conduit Conductor (CICC) d ...
Thanks to recent scientific achievements, second generation high-temperature superconductor coated conductors (HTS-CCs) can carry enormous current densities with reduced losses. In addition, they are able to switch from a negligible resistivity state to a ...
We report a new colloidal synthesis of niobium-doped TiO2 anatase nanocrystals (NCs) that allows for the prepn. of ∼10 nm NCs with control over the amt. of Nb doping up to ∼14%. The incorporation of niobium ions leads to the appearance of a tunable, broad ...
Doped SrTiO3 thin films, 55 nm thick, were epitaxially grown by Pulsed Laser Deposition with niobium contents ranging from 2 to 5 mol% on SrTiO3 and LaAlO3 substrates. The different templates result in different growth defects, film growth mechanism and th ...
In this work, the effects of vanadium addition in the range of 0.3-3% (in weight percent) for an oxide dispersion strengthened reduced activation ferritic (ODS RAF) steel were investigated. Samples of the V-modified steel have been prepared using elemental ...
Various techniques have been proposed in order to assemble coated conductor tapes into high current strands. In this work, the preparation of high current capacity round strands starting from industrial coated conductors has been investigated. Round, twist ...
We report on the results of directional point-contact Andreev-reflection (PCAR) measurements in Ba(Fe1-x Co (x) )(2)As-2 single crystals and epitaxial c-axis oriented films with x=0.08 as well as in Ca(Fe1-x Co (x) )(2)As-2 single crystals with x=0.06. The ...
Study of the quench phenomenon is crucial for the design of Resistive Fault Current Limiters (RFCLs) based on high temperature superconducting coated conductors (HTS-CCs). An optimal stabilization of the tape is required to achieve both an economic device ...
For resistive fault current limiters (RFCLs) based on high temperature superconducting coated conductors (HTS-CCs), inhomogeneity, in terms of critical current and geometrical imperfections such as stabilizer and substrate thicknesses, plays a very importa ...
In this thesis work we investigate the heat transfer through the electrical insulation of superconducting cables cooled by super fluid helium. The cable insulation constitutes the most severe barrier for heat extraction from the superconducting magnets of ...