Publications associées à Puissance (physique)

Design and Numerical Analyses of the M4 Steering Mirrors for the ITER Electron Cyclotron Heating Upper Launcher

Timothy Goodman, René Chavan, Matteo Vagnoni, Avelino Mas Sanchez

Four electron cyclotron heating upper launchers (ECHULs) will be used at ITER to counteract magnetohydrodynamic plasma instabilities by targeting them with up to 24 MW of mm-wave power at 170 GHz. This mm-wave power is injected through eight ex-vessel (EV) ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2019

Compound micromachines powered by acoustic streaming

Mahmut Selman Sakar, Furkan Ayhan, Murat Kaynak

This paper presents the design, fabrication, and operation of compound micromachines powered by acoustic streaming. The machine components were directly incorporated around pillars serving as shafts without further assembly steps using a single-step in sit ...

IEEE2019

An Energy Efficient Power Converter for Zero Power Wearable Devices

Milad Ataei Ashtiani

Early diagnosis of Alzheimer's and epilepsy requires monitoring a subject's development of symptoms through electroencephalography (EEG) signals over long periods. Wearable devices enable convenient monitoring of biosignals, unlike complex and costly hospi ...

EPFL2018

Adaptive Receiver Design for High Speed Optical Communication

Ilter Ozkaya

Conventional input/output (IO) links consume power, independent of changes in the bandwidth demand by the system they are deployed in. As the system is designed to satisfy the peak bandwidth demand, most of the time the IO links are idle but still consumin ...

EPFL2018

Regular Bulk CMOS Hall Effect Sensors Employment in Solid-State Power and Energy Meters

Maria-Alexandra Paun

This paper is intended to present an advanced technique to be used in solid-state power and energy meters, more specifically through the employment of the Hall effect sensors. From a qualitative point of view, an investigation into the sensing device is pe ...

Elsevier Science Bv2016

Electrical and Magnetical Modeling of Inductive Coupled Power Transfer Systems

Christophe Bruno Auvigne

Nowadays, there is a very high number of electronic devices with different ranges of power. Desktop peripherals and cellphones are an example of widely used low power devices. Contactless power transfer is useful to supply or recharge these devices without ...

EPFL2015

H-mode access during plasma current ramp-up in TCV

Yves Martin, Ivo Furno, Holger Reimerdes, Benoît Labit, Roland Behn

A recent TCV experiment has investigated the dependence of the L H transition threshold power on the plasma current ramp-rate and the X-point height above the divertor target, which both have previously been seen to affect the transition behaviour. Systema ...

Iop Publishing Ltd2014

A Wearable System Of Micromachined Piezoelectric Cantilevers Coupled To A Rotational Oscillating Mass For On-Body Energy Harvesting

Nico de Rooij, Danick Briand, Pattanaphong Janphuang, Robert Andrew Lockhart

In this paper, we present a compact, wearable piezoelectric on-body harvesting system that uses a small eccentric mass from a common watch movement to mechanically deflect a set of micromachined piezoelectric cantilevers when excited by the low frequency m ...

IEEE2014

High-Q Adaptive Matching Network for Remote Powering of UHF RFIDs and Wireless Sensor Systems

Catherine Dehollain, Onur Kazanç, Franco Maloberti

Process and temperature independent RF front-end design is important for remotely powered RFID tags and wireless sensor systems. Run-to-run process variations can impact the remote powering performance and therefore read range of aforementioned systems. We ...

Ieee2013

A Closed-Loop Remote Powering Link for Wireless Cortical Implants

Catherine Dehollain, Michel Declercq, Kanber Mithat Silay

This paper presents a closed-loop remote powering link for wireless cortical implants. The link operates from a single power supply at the external reader and delivers power to the implant adaptively under changing load conditions. A feedback information i ...

Institute of Electrical and Electronics Engineers2013