Concept

Plasma lamp

Publications associées (16)

Wideband integrated bioaerosol sensor (WIBS) excited, fluorescent, and hyper-fluorescent particle number concentrations and normalized size distributions (dN/dlogDp) measured in the Swiss container during MOSAiC 2019/2020

Julia Schmale, Ivo Fabio Beck, Alireza Moallemi, Margarida Teles Nogueira Rolo

These datasets contain the total particle number concentrations and normalized size distributions (dN/dlogDp) of excited, fluorescent, and hyper-fluorescent particles of sizes 0.5 to 20 μm (optical diameter). The normalized size distribution datasets are s ...

EPFL Infoscience2023

Tritium removal from JET-ILW after T and D-T experimental campaigns

Henri Weisen, Mikhail Maslov

After the second Deuterium-Tritium Campaign (DTE2) in the JET tokamak with the ITER-Like Wall (ILW) and full tritium campaigns that preceded and followed after the DTE2, a sequence of fuel recovery methods was applied to promote tritium removal from wall c ...

Bristol2023

Separation and Recycling Potential of Rare Earth Elements from Energy Systems: Feed and Economic Viability Review

Christian Ludwig, Rudolf Paul Wilhelm Jozef Struis, Ajay Bhagwan Patil, Viktoria Paetzel

This review explores the potential of separating and recycling rare earth elements (REEs) from different energy conversion systems, such as wind turbines, electric vehicles batteries, or lighting devices. The REEs include 17 elements (with global productio ...

2022

Unveiling the role of dielectric trap states on capacitively coupled radio-frequency plasma discharge: dynamic charging behaviors

Guang-Yu Sun, Arnas Volcokas

The influence of charge trap states in the dielectric boundary material on capacitively coupled radio-frequency (RF) plasma discharge is investigated with theory and particle-in-cell/Monte Carlo collision simulation. It is found that the trap states of the ...

2021

High power modular LED-based illumination system for lithography applications

Hans Peter Herzig, Marcel Groccia, Toralf Scharf, Wilfried Noell, Raoul Kirner, Johana Bernasconi

Mask-aligner lithography is a technology used to transfer patterns with critical dimensions in the micrometer range from below 1 micron for contact printing to a dozen of microns in proximity printing. This technology is widely used in the fabrication of M ...

2018

High power ultraviolet LED illumination systems: coherence properties and applications in photolithography

Johana Bernasconi

Mask-aligner photolithography is a technology used to replicate patterns from a mask to a photosensitive substrate. It is widely used in the fabrication of MEMS and micro-optical components, and for other applications with dimensions in the micrometer rang ...

EPFL2018

Experimental and Numerical Characterization of a New 45 kWel Multisource High-Flux Solar Simulator

Sophia Haussener, Gaël Jean Clément Levêque

The performance of a new high-flux solar simulator consisting of 18 × 2.5 kWel radiation modules has been evaluated. Grayscale images of the radiative flux distribution at the focus are acquired for each module individually using a water-cooled Lambertian ...

Optical Society of America2016

Light wavelength-dependent E. coli survival changes after simulated solar disinfection of secondary effluent

César Pulgarin, Sami Rtimi, Stefanos Giannakis

In this study, the photoreactivation and the modification of dark repair of E. coli in a simulated secondary effluent were investigated after initial irradiation under different conditions. The simulated solar exposure of the secondary wastewater was follo ...

Royal Society of Chemistry2015

Les mécanismes de lumière naturelle: analyse des bibliothèques d'Alvar Aalto. (Prix IBE-BIV 2013, Institut Belge de l'éclairage, affilié à la CIE)

Jean-Denis Bernard Marie Ghislain Thiry

Today, the challenges of sustainable development require revisiting all the parameters of architectural design. According to the International Energy Agency , in 2005, 19% of the electricity produced in the world was consumed for lighting. We know that the ...

2014

LTCC integrated miniature Rb discharge lamp module for stable optical pumping in miniature atomic clocks and magnetometers

Herbert Shea, Peter Ryser, Thomas Maeder, Fabrizio Vecchio, Vinu Lalgudi Venkatraman

We report here on an integrated mini-lamp module (15x26x4 mm3) with a microfabricated rf-powered Rb dielectric barrier discharge (DBD) lamp (10x10x3 mm3) positioned on top of a 0.6 mm thick (thickness adjustable) 4-layer LTCC (Low Temperature Co-fired Cera ...

IEEE2012

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Connectez-vous pour utiliser Chat avec Graph Search