Êtes-vous un étudiant de l'EPFL à la recherche d'un projet de semestre?
Travaillez avec nous sur des projets en science des données et en visualisation, et déployez votre projet sous forme d'application sur GraphSearch.
Concept
Unité de contrôle du moteur
Résumé
An engine control unit (ECU), also called an engine control module (ECM), is a device which controls multiple systems of an internal combustion engine in a single unit. Systems commonly controlled by an ECU include the fuel injection and ignition systems.
The earliest ECUs (used by aircraft engines in the late 1930s) were mechanical-hydraulic units, however most 21st century ECUs use digital electronics.
The main functions of the ECU are typically:
Fuel injection system
Ignition system
Idle speed control (typically either via an idle air control valve or the electronic throttle system)
Variable valve timing and/or variable valve lift systems
The sensors used by the ECU include:
accelerator pedal position sensor
camshaft position sensor
coolant temperature sensor
crankshaft position sensor
knock sensors
inlet manifold pressure sensor (MAP sensor)
intake air temperature
intake air mass flow rate sensor (MAF sensor)
oxygen (lambda) sensor
throttle position sensor
wheel speed sensor
Other functions include:
Launch control
Fuel pressure regulator
Rev limiter
Wastegate control and anti-lag
Theft prevention by blocking ignition, in response to input from an immobiliser
In a camless piston engine (an experimental design not currently used in any production vehicles), the ECU has continuous control of when each of the intake and exhaust valves are opened and by how much.
One of the earliest attempts to use such a unitized and automated device to manage multiple engine control functions simultaneously was the created by BMW in 1939 Kommandogerät system used by the BMW 801 14-cylinder radial engine which powered the Focke-Wulf Fw 190 V5 fighter aircraft. This device replaced the 6 controls used to initiate hard acceleration with one control, however the system could cause surging and stalling problems.
In the early 1970s, the Japanese electronics industry began producing integrated circuits and microcontrollers used for controlling engines. The Ford EEC (Electronic Engine Control) system, which utilized the Toshiba TLCS-12 microprocessor, went into mass production in 1975.
Source officielle
À propos de ce résultat
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.